112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢
  1. 按【查詢】按鈕：請先選擇學院→系所→教師，輸入起迄年或不輸入起迄年，再點選【查詢】即完成。
  2. 按【進階查詢】按鈕：採用組合查詢的方式。
  3. 按【匯出Word檔】按鈕：匯出教師【個人】著作資料。
搜尋條件：著作類別->全部著作 | 學院->College Of Engineering | 系所->Department of Chemical and Materials Engineering | 教師姓名->Lin Chi-Wen
      
         西元年   至    
林智汶老師的論文著述

一、學術期刊論文

  1. B.J. Hwang, J. Joseph, Y.Z Zeng, C.W. Lin, M.Y. Cheng, 2011, Analysis of States of Water in Poly (vinyl alcohol) Based DMFC Membranes Using FTIR and DSC, J. Membrane Science. (SCI)
  2. C W Lin*, ; L C Chung, ; R S Veerapur, ; F C Yang, 2011, Alternative hybrid electrolytes based on a series of bis(trialkoxysilyl)alkanes and 3-(trihydroxysilyl)-1-propane sulfonic acid applied in gas diffusion electrodes of proton exchange membrane fuel cells, Journal of Power Sources, Vol.196, pp.1069-1077. (SCI)
  3. Y.F. Huang, A.M. Kannan, C.S. Chang, C.W. Lin*, 2010, Development of gas diffusion electrodes for low relative humidity proton exchange membrane fuel cells, International Journal of Hydrogen Energy. (SCI)
  4. Jorphin Joseph, Chi-Yung Tseng, Chun-Jern Pan, Hung-Ming Chen, Chi-Wen Lin,, 2010, Growing well-defined Monodispersed silica in polyimide Host membranes using, POLYMER. (SCI)
  5. Y. F. Hwang, C. W. Lin*, 2010, The structure change-induced morphology transition of polyaniline in 1.6-hexanediol aqueous and acid-free solutions: From submicron-spheres to nanofibers, Synthetic Metals, Vol.160, pp.384-389. (SCI)
  6. Y.F. Huang, C. W. Lin*, 2010, Exploration of the morphological transition phenomenon of polyaniline from microspheres to nanotubes in 1-propanol and acid-free aqueous solution in a single polymerization process, Polymer International. (SCI)
  7. C.E Tsai, C.W. Lin, and B.J. Hwang, 2010, A Novel crosslink strategy for preparing poly (vinyl alcohol)-based proton conducting membrane with high sulfonation, J. Power Sources, Vol.195, pp.2166-2173. (SCI)
  8. C. Louis; A. M Kannan, J.F. Lin, K. Saminathan; Y. Ho; C.W. Lin; John Wertz, 2009, Gas Diffusion Layer for Proton Exchange Membrane Fuel Cells - a Review, J. Power Sources, Vol.194, pp.146-160. (SCI)
  9. Y.F. Hwang, C. W. Lin*, 2009, Exploration of the formation mechanisms of polyaniline nanotubes and nanofibers through a template-free method, Synthetic Metals, Vol.159, pp.1824-1830. (SCI)
  10. Y.F. Huang, C. W. Lin*, 2009, Introduction of methanol in the formation of polyaniline nanotubes in an acid-free aqueous solution through a self-curling process, POLYMER1., Vol.50, pp.775-782. (SCI)
  11. Y. F. Huang, B. J. Hwang, C. W. Lin*, 2009, Sorption and transport properties of the semi-interpenetrating network based on crosslinked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride) as proton conducting membranes, J. Applied Polymer Science, Vol.113, No.1, pp.342-350. (SCI)
  12. Y. F. Huang; L. C. Chuang; A. M. Kannan, C. W. Lin*, 2009, Proton-conducting membranes with high selectivity from crosslinked poly(vinyl alcohol) and poly(vinyl pyrrolidone) for direct methanol fuel cell applications, Journal of Power Sources, Vol.186, pp.22-28. (SCI)
  13. Chia-Chin Shen, Jorphin Joseph, Yun-Chih Lin, Sheng-Horng Lin, Chi-Wen Lin, Bing Joe Hwang, 2008, Modifying microphase separation of PVA based membranes for improving proton/methanol selectivity, Journal of Desalination, Vol.233, pp.82-87. (SCI)
  14. C.W. Lin, Y.F. Huang, A.M. Kannan, 2007, Semi-interpenetrating network based on crosslinked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride) as proton exchange fuel cell membranes, J. Power Sources, Vol.164, pp.449-456. (SCI)
  15. C.W. Lin*, Y.F. Huang, A.M. Kannan, 2007, Crosslinked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride) based semi-interpenetrating network as proton conducting membranes for Direct Methanol Fuel Cells, J. Power Sources, Vol.171, pp.340. (SCI)
  16. Hsin-Chieh Chiu, Chi-Wen Lin, Shing-Yi Suen, 2007, Isolation of lysozyme from hen egg albumen using glass fiber-based cation-exchange membranes, J. Membrane Science, Vol.290, pp.259-266. (SCI)
  17. R. Thangamuthu, C. W. Lin*, 2006, Preparation of gas diffusion electrodes using PEG/SiO2 hybrid materials and effect of their composition on microstructure of catalyst layer and fuel cells performance, J. Power Sources, Vol.161, pp.160-167. (SCI)
  18. C. W. Lin*, K.C. Phan, R. Thangamuthu, 2006, Preparation and characterization of high selectivity organic-inorganic hybrid-laminated Nafion 115 membranes for DMFC, J. Membrane Science, Vol. 278, pp. 437-446. (SCI, EI)
  19. R. Thangamuthu, C. W. Lin*, 2005, Membrane electrode assemblies based on sol-gel hybrid membranes – A preliminary investigation on fabrication aspects, J. power sources, Vol. 150C, pp. 48-56. (SCI, EI)
  20. M. Venkateswarlu a, C.H. Chena, J.S. Dob, C.W. Lin c, T.C. Choud, B.J. Hwang, 2005, Electrochemical properties of nano-sized Li4Ti5O12 synthesized by a sol–gel process and characterized by X-ray absorption spectroscopy, J. Power Sources, Vol. 146, pp. 204-208. (SCI, EI)
  21. C. W. Lin, C. L. Hung, M.Venkateswarlu, B. J. Hwang, 2005, Influence of TiO2 Nano-particles on the Transport Properties of Composite Polymer Electrolyte for Lithium-ion Batteries, J. Power Sources, Vol. 146, pp. 397-401. (SCI)
  22. C. W. Lin*, R. Thangamuthu, P. H. Chang, 2005, PWA-doped PEG/SiO2 proton conducting hybrid membranes for fuel cell applications, J. Membrane Science, Vol. 254, pp. 197-205. (SCI, EI)
  23. C. W. Lin*, R. Thangamuthu, C. J. Yang, 2005, Proton conducting membranes with high selectivity from phosphotungstic acid-doped poly(vinyl alcohol) for DMFC applications, J. Membrane Science, Vol. 253, pp. 23-31. (SCI, EI)
  24. C. W. Lin*， C. P. Tsao, 2005, Comparison of properties and fuel cell performance of Nafion and Nafion/silicon oxide composite proton conductive membranes derived from in-situ sol-gel Process, J. Chin. Colloid & Interface Soc, Vol. 27, pp. 191-206.
  25. R. Thangamuthu, C. W. Lin*, 2005, DBSA-doped PEG/SiO2 proton conducting hybrid membranes for low temperature fuel cell applications, Solid state ionics, Vol. 176, pp. 531-538. (SCI, EI)
  26. C. W. Lin*, H. Y. Chang, R. Thangamuthu, 2004, Structure-property relationship in PEG/SiO2 based proton conducting hybrid membranes- A 29Si CP/MAS solid-state NMR study, J. Membrane Science, Vol.228, pp.217-226. (SCI)
  27. H. Y. Chang, C. W. Lin, 2003, Proton Conducting Membranes Based on PEG/SiO2 Nanocomposites for direct Methanol Fuel Cells, J. Membrane Science, Vol. 218, No. 295-306. (SCI)
  28. C. W. Lin, Y. L. Liu, R. Thangamuthu, 2003, Investigation of the Relationship between Surface Thermodynamics of the Chemical-synthesized Polypyrrole Films and Their Gas Sensing Responses to BTEX Compounds, Sensors and Actuators B:Chemical, Vol. 94, No. 6-45, pp. 36-45. (SCI)
  29. J. P. Tsao, C. W. Lin, 2002, Preparations and Characterizations of the Nafion/SiO2 Proton Exchange Composite Membrane, Journal of Materials Science and Engineering, Vol. 34, No. 1, pp. 17-26.
  30. C. W. Lin, Y. C. Lai, and S. S Liu, 2001, Effect of Surface Roughness of the Sulfuric Acid Anodized-Aluminum Molded against Isotactic Polypropylene upon the Interfacial Crystallization Behaviors, J. Adhesion Science and Technology, Vol. 15, No. 8, pp. 929-944.
  31. C. W. Lin and S. S Liu, 2001, Study of the Actions of BTEX Compounds on Polypyrrole Film as a Gas Sensor, J. Appl. Polym, Vol. 82, pp. 954-961. (SCI, EI)
  32. B. J. Hwang, J. Y. Yang, and C. W. Lin, 2001, Recognition of alcohol vapor molecules by simultaneous measurements of resistance changes on polypyrrole-based composite thin films and mass changes on a piezoelectric crystal, Sensors and Actuators, Vol. B 75, pp. 67-75.
  33. 林智汶, 2000, 有機材料氣體感測器之應用, 化工技術, pp. 136-144.
  34. C. W. Lin, J. Y. Yang, and B. J. Hwang, 1999, Methanol sensors based on the conductive polymer composites from polypyrrole and poly(ethylene oxide), J. Chinese Inst. of Chem. Eng, Vol. 30, pp. 449-456.
  35. C. W. Lin, B. J. Hwang, C, and R. Lee, 1999, Characterization and Sensing Behaviors of the Electrochemically Co-deposited Polypyrrole-poly(vinyl alcohol) Thin Film Exposed to Ethanol Vapor, J. Appl. Polym, Vol. 73, No. 11. (SCI)
  36. C. W. Lin and Y. C. Du, 1999, Effect of Surface Topographies of PTFE and Polyimide as Determined by Atomic Force Microscopy on the Heterogeneous Nucleation of Isotactic Polypropylene, Mater. Chem. Phys, Vol. 58, pp. 268-275.
  37. C. W. Lin, 1999, Effect of Chromate Coating with and without Poly(acrylic acid) on the press formality, shearing properties and Durability of the Galvanized Steel Laminates Using Poly(vinyl butyral) as Core Material, J. Material Science, Vol. 34, pp. 3951-3956.
  38. B. J. Hwang, J. Y. Yang, and C. W. Lin, 1999, A microscopic Gas-sensing model for ethanol sensors based on the conductive polymer composites from polypyrrole and poly(ethylene oxide), J. Electrochem. Soc, Vol. 146, pp. 1231-1236.
  39. C. W. Lin and W. L. Lee, 1998, An investigation of the modification of polypropylene by grafting of maleic anhydride based on the aspect of adhesion, J. Appl. Polym, Vol. 70, No. 2, pp. 383-387. (SCI)
  40. 林智汶, 許文政, 黃炳照, 1997, 聚四氟乙烯之表面改質與金屬化濕式化學法與乾式電漿法之比較, 材料科學, Vol. 29, No. 3.
  41. 林智汶, 1996, 精密化學品專輯－複合材料, 化工技術, pp. 148-157.
  42. B. J. Hwang, C. J. Lin, and C. W. Lin, 1995, Adhesion of electroless nickel deposition to ceramin alumina, J. Technology, Vol. 10, No. 2, pp. 203-207.
  43. C. W. Lin, 1994, Examination of rubber torn from a highly elastic joint and a metal joint, J. Material Science Letters, Vol. 13, pp. 349-351.
  44. C. W. Lin, 1993, Modification of polypropylene by peroxide-catalysed grafting of maleic anhydride for adhesive bonding-surface and interface, J. Material Science Letters, Vol. 12, pp. 612-614.
  45. C. W. Lin, 1992, Effect of moisture absorption on the mechanical properties of unidirectionally reinforced nylon 6 composite, China Steel Technical Report, No. 6, pp. 210-215.
  46. C. W. Lin. And M. S. Chang, 1991, A study on the adhesive bonding between functionalized polyolefins and steel sheets with and without chromate conversion coating, China Steel Technical Report, No. 5, pp. 143-148.
  47. N. Gent and C. W. Lin, 1990, Model studies of the effect of surface roughness and mechanical interlocking on adhesion, J. Adhesion, Vol. 32, pp. 113-125.
  48. N. Gent and C. W. Lin, 1989, Comparison of peel and lap shear bond strengths for elastic joint with and without residual stress, J. Adhesion, Vol. 30, pp. 1-11.
二、研討會論文
  1. 林智汶, 劉衍良, 2001, 聚咯膜對苯環類氣體 BTEX 之感測模式探討, 中國材料科學年會.
  2. 林智汶, 曹金萍, 2001, 複合質子交換膜 Nafion/SiO2 之製備與特性分析, 中國材料科學年會.
  3. 林智汶, 張漢宜, 2001, 奈米複合型電解質薄膜之製備與特性分析林智汶, 中國材料科學年會.
  4. C. W. Lin, S. S Liu, B. J. Hwang, and C. R. Lee, 2000, Gas Sensing Behaviors of the Electrochemically Co-deposited Polypyrrole-poly (vinyl alcohol) Composite Thin Film, 8th Intern. Meeting on Chem. Sensors, Basel.
  5. 劉衍良, 劉淑薰, 林智汶, 2000, 聚咯膜對苯環類氣體之感測模式探討, 第 22 屆高分子研討會.
  6. 林智汶, 曹金萍, 2000, Nafion/SiO2 複合質子交換膜之製備與特性分析, 中國材料科學年會.
  7. 林智汶, 曹金萍, 楊宗怡, 1999, 有機氣體感測器之製備與特性研究, 88 年度化工研討會及專題研討會.
  8. 黃炳照, 林智汶, 劉豫川, 李慶榮, 1998, Polypyrrole/PVA複合膜對乙醇氣體之回應, Proceedings of the 21th R.O.C. Polymer Symposium, pp. 25.
  9. 林智汶, 劉淑薰, 賴奕程, 1998, 聚丙烯於氧化鋁之界面結晶之研究, Proceedings of the 21th R.O.C. Polymer Symposium.
  10. 林智汶, 黃炳照, 李慶榮, 1998, Polypyrrole/PVA複合膜對甲醇氣體之回應, Proceedings of the 21th R.O.C. Polymer Symposium, pp. 315.
  11. 林智汶, 杜佾彰, 1998, 底材之表明形態對高分子異質成核之影響, Proceedings of the 21th R.O.C. Polymer Symposium 1998, pp. 183.
  12. C.W. Lin, J.Y. Yang, and B.J. Hwang, 1997, A study on the gas sensors based on the conductive polymer composites from polypyrrole and poly (ethylene oxide), 第20屆高分子研討會, 新竹(國立清華大學).
  13. C.W. Lin, B.J. Hwang, and W.J. Shu, 1997, A wet chemical treatment of PTFE ,for improving adhesion to electroless copper coatings, 第 20 屆高分子研討會, 新竹(國立清華大學).
  14. 林智汶, 1995, 橡膠在高彈性接合與金屬接合之撕裂破壞比較, 第 18 屆高分子研討會, 新竹(國立清華大學).
  15. Lin, C.W., 1993, Effect of moisture absorption on the mechanical properties of poly (ε-caprolactam) and its composite, Proc. of the Advanced Composite 1993 Conference, Wollongong.
  16. Lin, C.W., 1992, Modification of PP by peroxide-catalysed grafting of maleic anhydride for adhesive bonding, Proc. of the 15th Polymer Symposium.
  17. Lin, C.W., 1992, Effect of moisture absorption on the impact behavior of unidirectionally reinforced nylon 6 composite, Proc. of the 15th ROC Polymer Symposium.
  18. Lin, C.W., 1991, Enhancement of interfacial strenght of a vibration-damping steel sheet, Proc. of The 1991 Annual Conference of the Chinese Soc. For Mater. Sci., pp. 82-83.
  19. B.J. Huang and Lin, C.W., 1991, A study on the adhesion of electroless nickel deposition to ceramic alumina, Proc. of The 1991 Annual Conference of the Chinese Soc. for Mater. Sic, pp. 524-525.
  20. 林智汶, 1990, Structural adhesive bonding of composites, 高分子複合材料之破壞行為專題研討會, 高雄市(國立中山大學).
  21. Lin, C.W., 1990, Adhesion enhancement of polymer-steel interface for vibration-damping steel sheet, Modern Eng. and Tech. Seminar, pp. 197-212.
  22. Lin, C.W., 1988, Comparison of peel and lap shear measurements of adhesive bond strenght, Proceedings of The 11th Annual Meeting of The Adhesion Society, South Carolina, pp. 77-80.
三、其他論著
  1. 張漢宜, 曹金萍, 林智汶, 2002, PEMFC燃料電池電解質之現況與未來發展方向.
  2. 林智汶, 2001, 苯環類有機溶劑自動偵測方法之研究, 行政院環保署 89 年度環保署科技合作研究計劃期末報告.
  3. 林智汶, 1998, 石化工廠廠區與周界空氣品質監控系統之運轉技術評估與規劃, 行政院環保署 86 年度空氣污染防制研究發展計劃第二年度期末報告.
  4. 林智汶, 1997, 瓷磚生胚之強度改善, 教育部 86 年度補助至企業單位研究訪問成果報告.
  5. 林智汶, 1997, 石化工廠廠區與周界空氣品質監控系統之運轉技術評估與規劃, 行政院環保署 86 年度空氣污染防制研究發展計劃第一年度期末報告.
  6. 林智汶, 1997, PVC 系複合材料之開發, 經濟部工業局輔導化學工業建立技術開發能力計劃期末報告.
  7. 林智汶, 1996, 熱塑性複合材料之粘著研究, 教育部 85 年度補助至企業單位研究訪問成果報告.
  8. 林智汶, 1996, 聚四氟乙烯之表面金屬化於電子工業應用之技術開發, 經濟部工業局輔導化學工業建立技術開發能力計劃期末報告.
  9. 林智汶, 1991, 制振用夾層鋼片之表面處理及樹脂改質對加工性之影嚮, 經濟部列管重大研究計畫.
  10. 陳賢英, 廖福森, 林智汶, 1990, 夾層鋼片之研究與開發, 經濟部 79 年度研究發展專題報告.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 
SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Register｜logon登入 Login 
國立雲林科技大學 版權所有 c2005 National Yunlin University of Science & Technology, All Rights Reserved.