|
吳英正老師的論文著述 一、學術期刊論文 - 吳英正, 2010, Research of The Cooling Efficiency for The Trees, Science Education Monthly, No.332, pp.40-46.
- Gwo-Lianq Chern, Jyun-Cheng Cheng, Ying-Jeng Engin Wu, Kuo-Jei Huang, 2007, Development of A Micro-EDM/Milling Machine and Study on Micro-machining Using Micro-tools, J. CSME. (EI)
- Gwo-Lianq Chern, Ying-Jeng Engin Wu, Jyun-Cheng Cheng, Jian-Cheng Yao, 2007, Study on burr formation in micro-machining using micro-tools fabricated by micro-EDM, Precision Engineering -- Journal of the international societies for precision engineering and nanotechnology, Vol.31, pp.122-12. (SCI, EI)
- Gwo-Lianq Chern, Ying-Jeng Engin Wu, Shun-Feng Liu, 2006, Development of A Micro-punching Machine and Study on The Influence of Vibration Machining in Micro-EDM, Journal of Materials Processing Technology (SCI, EI), Vol.180, No.1, pp.102-109. (SCI, EI)
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2002, Optimal Predicted Fuzzy PI Gain- Scheduling Controller of Constant Turning Force Systems with Fixed Metal Removal Rate, International Journal of Advanced Manufacturing Technology, No. 19, pp. 714-721.
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2002, Optimal Predicted Fuzzy Controller of a Constant Turning Force Systems with Fixed Metal Removal Rate, Journal of Material Processing, Vol.4, pp.843-848. (SCI, EI)
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2001, Robustness of Eigenvalue-Clustering in a Ring Region for Linear Perturbed Discrete Time-Delay Systems, IEICE Transactions on Fundamentals of Electronics,Communications and Computer Sciences, No. 6, pp. 1557-1563.
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2001, Optimal Takagi-Sugeno Fuzzy Gain-Scheduler Design Using Taguchi-MHGA Method, JSME International Journal,Series C, Vol. 44, No.1, pp.143-155.
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2001, Optimal Grey-Fuzzy Gain-Scheduler Design Using Taguchi-MHGA Method, Journal of Intelligent and Robotic Systems, No. 32, pp.321-345.
- Chen-Huei Hsieh, Jyh-Horng Chou, and Ying-Jeng Engin Wu, 2000, Taguchi-Genetic Algorithms for Optimizing GM (1,1) Model, Journal of Grey Systems, No. 3, pp. 245-254.
- Chen-Huei Hsieh, Jyh-Horng Chou, and Ying-jeng Engin wu, 2000, Robust Regional Engenvalue-Clustering Analysis for Linear Peturbed Discrete Time-Delay Ststem, Journal of the Chinese Institute of Engineers, Vol. 23, No. 1, pp. 125-130.
- Ying-Jeng Engin Wu and Jyh-Horng Chou, 1999, Sufficient Condition for Second-Order Linear Systems Having No Zeros, Journal of Vibration and Control, No. 5, pp. 233-235.
二、研討會論文- 吳英正, 2015, The Frame Stiffness Optimization with Frame Geometry for 650B Steel Frame Mountain Bike, 中國機械工程學會第三十二屆全國學術研討會論文集, 2015/12/11-12, 國立高雄應用科技大學, 高雄市,國立高雄應用科技大學, Paper No.154.
- 吳英正, 2012, Dynamic Simulation and Analysis of Six-axis Electro Servo Cylinder Platform, Proceedings of the 29th National Conference on Mechanical Engineering, 2012/12/07-08, 國立中山大學, Kaohsiung, Taiwan, No.1515.
- 吳英正, 2011, The Study and analysis of Shut Clearance for Vacuum Thermoforming machine, Proceedings of the 28th National Conference on Mechanical Engineering, 2011/12/10-11, 中國機械工程師學會, Taichung, paper number C08-027.
- 吳英正, 2011, Electrode Fabrication in Micro-EDM with Computer Vision, Proceedings of the 11th International Conference on Automation Technology, 2011/11/18-20, Chinese Institute of Automation Engineers, Yunlin, NYUST, paper number D001.
- 吳英正, 2010, Design and Fabrication of Micro Turbine by Micro Rapid Prototyping Technology, Proceedings of the 27th National Conference on Mechanical Engineering, 2010/12/10-11, 機械工程學會, 台北市,北科大.
- 吳英正, 2010, The Optimum Damping and LCA Stress Analysis of Automotive Semi-active Suspension System, Proceedings of the 34th National Conference on Theoretical and Applied Mechanics, 2010/11/19-20, 力學學會, 雲林斗六,雲科大.
- 吳英正, 2010, Research of Contact Force Control on Flexible Boundary, Proceedings of the 34th National Conference on Theoretical and Applied Mechanics, 2010/11/19-20, 力學學會, 雲林斗六,雲科大.
- 吳英正, 2009, The Geometric Error from Component Inaccuracy in Machine Tool, Proceedings of the 26th National Conference on Mechanical Engineering, 2009/11/20-21, 中國機械工程學會, Tainan.
- 吳英正, 2009, Measurement and Analysis of Ball Screw Thermal Deformation of High Precision Borer, Proceedings of the 26th National Conference on Mechanical Engineering, 2009/11/20-21, 中國機械工程學會, Tainan.
- 吳英正, 2009, Tolerance Sensitivity Analysis for Structure and Assembly of Ball Screw Feeding System, Proceedings of the 12th National Conference on The design of Mechanism and Machines, 2009/11/06, 中國機構學會, ChiaYi.
- 吳英正, 2009, Curricular of Sound for Elementary School : Recognition of Sound Wave, Symposium of the Physical Society of ROC, 2009/01/20, Physical Society of ROC, 彰化.
- 吳英正, 2007, Thermal Deformation Measurement for High Precision Borer, 中華民國機構與機器原理學會第十屆全國機構與機器設計學術研討會, 2007/11/30, 台中市,中興大學, paper No.2.
- 吳英正, 2007, Dynamic Simulation and Analysis of Multi-Wheeled Independent Hydro-pneumatic Suspension System, 中國機械工程學會第二十四屆全國學術研討會論文集, 2007/11/23-24, 中壢市,中原大學, Paper No. E18-1030.
- 吳英正, 2007, Zen and Life Programming, 第七屆禪與管理學術研討會(論文集), 2007/05/26, 台北,華梵大學, pp.143-150.
- 鄭俊誠, 吳英正, 陳志明, 陳志彥, 張燦輝, 林清源, 張恩生, 2003, 高速單軸線性馬達機台熱變位分析, 中國機械工程學會第二十屆學術研討會論文光碟,製造與材料,Dec.,論文編號D03-02, 2003/12/05-06, 台灣大學, 台北, 台灣大學.
- Ying-Jeng Engin Wu and Yu-Ming Wu, 2003, Machine Vision for Electrode Fabrication in Micro-EDM, 中國機械工程學會第二十屆學術研討會論文光碟,新興工程技術,Dec.,論文編號E01-32, 2003/12/05-06, 台灣大學, 台北, 台灣大學.
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2001, Robust Stability Analysis of TS Fuzzy Control Systems with Time-Varying Consequent Elemental Uncertainties, Proceedings of The 9th Fuzzy Theory and Application Conference.
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2001, Optimal Predicted Fuzzy Control System in Turning Operation with Fixed Metal Removal Rate, Proceedings of The 2001 Automatic Control Conference, pp. 247-253.
- 吳英正, 2001, 禪與自我管理, 第四屆禪與管理學術研討會(論文集), 台北(華梵大學), pp. 143-150.
- 蔡振揚, 吳英正, 2000, 視窗環境下即時控制系統之發展, 中國機械工程學會第17屆學術研討會論文光碟(控制與自動化), 高雄(國立高雄第一科技大學).
- 黃國瑞, 陳國亮, 鄭俊誠, 郭佳儱, 吳英正, 2000, 利用線放電研磨加工技術於微小銑刀製作及加工研究, 中國機械工程學會第17屆學術研討會論文光碟(新興工程技術), 高雄(國立高雄第一科技大學).
- 陳國亮, 任自強, 吳尚德, 吳英正, 郭佳儱, 羅斯維, 劉舜逢, 2000, 利用比例電磁線圈於微衝壓系統及微小衝頭製作研究, 中國機械工程學會第17屆學術研討會論文光碟(新興工程技術), 高雄(國立高雄第一科技大學).
- 石寶明, 吳英正, 2000, 微細放電加工之間隙控制與深孔加工, 中國機械工程學會第17屆學術研討會論文光碟(新興工程技術), 2000/12/08-09, 高雄(國立高雄第一科技大學).
- Ying-Jeng Engin Wu, Jenn-Yang Tsai and Yu-Ming Wu, 2000, On-Line Measurement and Compensation for Electrode Fabrication in Micro-EDM, Proceedings of The Sixth International Conference on Automation Technology'Taipei, 2000/05/09-11, Taipei, pp. 373-376.
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2000, Taguchi-MHGA Method for Optimizing Grey-Fuzzy Gain-Scheduler, Proceedings of The Sixth International Conference on Automation Technology, 2000/05/09-11, Taipei, pp. 575-582.
- Chen-Huei Hsieh, Jyh-Horng Chou and Ying-Jeng Engin Wu, 2000, Taguchi-MHGA Method for Optimal Takagi-Sugeno Fuzzy Gain-Scheduler Design, Proceedings of The 2000 Automatic Control Conference, 2000/03/09-10, HsinChu, pp. 523-528.
- 鄭俊誠, 吳英正, 徐碧聰, 1999, 精密綜合切削中心機之機電系統整合與性能分析, 第2屆全國機構與機器設計學術研討會(論文集), pp. 185-192.
- 蔡振揚, 石寶明, 吳英正, 郭佳儱, 鄭俊誠, 1999, 微組立自動化技術研究, 第3屆奈米工程暨微系統技術研討會(論文集), 新竹(工業技術研究院), pp. 2.169-2.176.
- 吳英正, 1999, 禪與情緒管理, 第3屆禪與管理學術研討會(論文集), 台北(華梵大學), pp. 119-125.
- 鄭俊誠, 吳英正, 黃英裕, 劉澄昇, 1998, 自動化生產監控系統應用有線電視5網路之研究, 中國機械工程學會第15屆學術研討會(論文集)(控制與自動化), Tainan, pp. 333-339.
- 張志豪, 吳英正, 1998, 加速度回授應用於振動控制系統之特性研究, 中國機械工程學會第15屆學術研討會(論文集)(控制與自動化), 台南(成功大學), pp. 53-60.
- 陳順同, 郭佳儱, 吳英正, 1997, 微放電加工電極補償之研究, 中國機械工程學會第14屆學術研討會(論文集)(現代工程技術), 桃園(國立中央大學), pp. 172-179.
- 周政彥, 吳英正, 1997, 變動邊界之接觸力量控制: 理論分析, 中國自動化科技學會第10屆學術研討會(論文集), pp. 729-736.
- Ying-Jeng Engin Wu and Jyh-Horng Chou, 1997, Sufficient Condition for Second-Order Linear Systems Having No Zero, 中國機械工程學會第14屆學術研討會(論文集)(控制與自動化), pp. 95-96.
- C.-L. Kuo, S. Chen and Ying-Jeng Engin Wu, 1997, Research of 3D micro-EDM maching Technique, Symposium on Smart Materials,Structures and MENS, Adelaide(University of South Australia).
- 劉惠民, 郭佳儱, 吳英正, 1996, 水平式微小放電加工機之開發及深孔加工之研究, 中國機械工程學會第13屆學術研討會(論文集), Taipei, pp. 451-458.
- Ying-Jeng Engin Wu, 1996, A Bond-Graph Model of the Stewart Platform, 中國機械工程學會第13屆學術研討會(論文集), Taipei, pp. 406-412.
- 張世誠, 郭佳儱, 吳英正, 1995, 多功能微小綜合加工機的開發及微細加工的研究, 中國機械工程學會第12屆學術研討會(論文集), Chia-Yi, pp. 261-270.
- Ying-Jeng Engin Wu and J. J. Beaman, 1992, Laser Tracking Control Implementation for SFF Applications, Solid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, pp. 179-187.
- Ying-Jeng Engin Wu and J. J. Beaman, 1991, Solid Freeform Fabrication Laser Tracking Control, Solid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, pp. 37-45.
- Ying-Jeng Engin Wu and J. J. Beaman, 1990, Contour Following for Scanning Control in SFF Application: Control Trajectory Planning, Solid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, pp. 126-134.
|
|
|