112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢
  1. 按【查詢】按鈕：請先選擇學院→系所→教師，輸入起迄年或不輸入起迄年，再點選【查詢】即完成。
  2. 按【進階查詢】按鈕：採用組合查詢的方式。
  3. 按【匯出Word檔】按鈕：匯出教師【個人】著作資料。
搜尋條件：著作類別->全部著作 | 學院->College Of Engineering | 系所->Department of Mechanical Engineering | 教師姓名->Renn Jyh-Chyang
      
         西元年   至    
任志強老師的論文著述

一、學術期刊論文

  1. Chin Yi Cheng, Jyh Chyang Renn, Saputra Ilham and Chen-En Shi, 2022, FEM Design and Implementation of a Novel Linear Motor for Fluid-Power Proportional Valves, Journal of Innovative Technology (JIT), Vol.4, No.2, pp.13-19.
  2. 任志強, 2021, 槓桿作動式氣壓電磁線圈設計與實驗研究, 機械新刊, Vol.6, No.5, pp.56-62.
  3. Chin Yi Cheng, Jyh Chyang Renn, Yi Zhe Xie, Yi Kai Huang and Chun Bin Yang, 2021, FEM Design of Proportional Solenoid for Hydraulic Proportional Suspension Damper, IOP Conference Series: Materials Science and Engineering, Vol.1113, No.012009, DOI:10.1088/1757-899. (EI)
  4. 楊純賓, 許偉倫, 任志強, 2020, 比例式液壓懸吊系統之比例電磁線圈設計分析, 機械新刊, Vol.4, No.5, pp.50-57.
  5. 許文壬, 任志強, 2020, 液靜壓止推軸承油膜厚度閉迴路控制之研究, 機械新刊, Vol.4, No.5, pp.42-49.
  6. Renn, Jyh-Chyang, Wu, Guang-Yi, 2019, A Study on Active Closed-Loop Gap Control for Hydrostatic Bearing, J. Applied Mechanics and Materials (AMM), Vol.894, No.1, pp.51-59. (EI)
  7. 楊純賓, 許偉倫, 吳憲儒, 任志強, 2019, 應用CFD於比例式液壓懸吊阻尼避震器之設計研究, 機械新刊, Vol.4, No.5, pp.62-68.
  8. 任志強, 鄭秦亦, 吳尚儒, 李柏翰, 2018, 氣壓撓性致動器應用於並聯式四軸人工手臂運動控制之設計研究, J. of Technology(技術學刊), Vol.33, No.3, pp.143-154. (EI)
  9. 任志強, 余佩珍, 2018, 簡易結構之伺服氣壓3軸自動化取放機器臂研發, 機械新刊, Vol.3, No.5, pp.46-54. (其他)
  10. Renn, Jyh-Chyang, Li, Bo-Han, 2017, A Robot Arm Based on Parallel Pneumatic Flexible Muscle Actuators, MATEC Web of Conferences, Vol.123, No.00020, https://doi.org/10.1. (EI)
  11. Renn, Jyh-Chyang, Hsu, Wen-Jen and Yun-Ruei Li, 2017, Development of Hydrostatic Bearing with Spool-Type Restrictor for Large Single Column Vertical Lathe, ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering, Vol.X, No.2, pp.27-32. (其他)
  12. Renn, Jyh-Chyang, Hsu, Wen-Jen and Yun-Ruei Li, 2016, An innovative Spool-Type Pressure Feedback Restrictor for Hydrostatic Bearings, Smart Science, Vol.4, No.4, pp.203-208. (其他)
  13. Renn, Jyh-Chyang, Hsu, Wen-Jen and Li, Yun-Ruei, 2015, Constant Pressure Control for Energy Efficient Lathe Turret, Journal of Key Engineering Materials, Vol.661, No.3, pp.3-9. (EI)
  14. Renn, Jyh-Chyang, Chiou, Yaw-Ming, 2015, Active Closed-Loop Gap Control for Aerostatic Bearing, Lecture Notes in Electrical Engineering, Vol.345, No.1, pp.1-7. (EI)
  15. Cheng, Chin-Yi, Renn, Jyh-Chyang, 2014, Development of Novel Continuous Variable Current Control for a Full-Digital Pneumatic Cylinder Position Control System, J. of the CSME, Vol.35, No.3, pp.233-241. (SCI, EI)
  16. Lin, Meng-Han, Renn, Jyh-Chyang, 2014, Design of a Novel Energy Efficient Hydraulic Tube Bender, J. of Procedia Engineering, Vol.79, No.11, pp.555-568. (其他)
  17. Renn, Jyh-Chyang, Cheng, Chin-Yi and Ho, Nien-Ting, 2014, Large-stroke Control of a Telescopic Two-stage Linear Motor, Lecture Notes in Electrical Engineering, Vol.293-1, No.30, pp.239-250. (EI)
  18. Renn, Jyh-Chyang, Cheng, Chin-Yi and Lin, Meng-Han, 2014, Energy-Saving Design for Hydraulic Tube Bender, Journal of Energy and Power Engineering, Vol.4, No.1, pp.26. (SCI, EI)
  19. Renn, Jyh-Chyang, Chen, Chin-Yi, 2013, An Absolute Non-Contact Vacuum Pad with Embedded Air Bearings, J. of Technology, Vol.28, No.14, pp.9-14. (EI)
  20. Chin-Yi Cheng, Jyh-Chyang Renn, 2012, Modeling and Experiment of an Active Pneumatic Vibration Isolator according to ISO 6358, J. of the CSME, Vol.33, No.1, pp.51-57. (SCI, EI)
  21. Chun-Ta Chen, Jyh-Chyang Renn and Zong-Yuan Yan, 2011, Experimental Identification of Inertia and Friction Parameters for Electro-hydraulic Motion Simulator, J. of Mechatronics, Vol.21, No.1, pp.1-10. (SCI, EI)
  22. Renn, Jyh-Chyang, Cheng, Chin-Yi and Yang, Yong-Chao, 2010, Design of a Novel Hand-held Pneumatic Vacuum Pad Using CFD, J. of Marine Science and Technology, Vol.18, No.5, pp.637-643. (SCI, EI)
  23. 任志強, 2010, 節能液壓4/3方向電磁閥設計研究, 機械月刊, Vol.36, No.7, pp.32-38.
  24. 任志強, 林松崑, 顏宗源, 2009, 伺服液壓六軸動感平台結合虛擬實境之控制, 科技學刊, Vol.18, No.1, pp.1-12.
  25. Renn, Jyh-Chyang, Chin-Yi Chen and Chia-Hua Lu, 2008, Gap Control for a Proportional Floating Vacuum Pad, JMES, Proc. Instn. Mech. Engrs, Part C, Vol.222, No.11, pp.2069-2072. (SCI, EI)
  26. 任志強, 鄭俊誠, 顏宗源, 郭建春, 2008, 六軸動感平台結合虛擬實境之研究, 機械技師學刊, Vol.1, No.3, pp.21-26. (其他)
  27. 任志強, 鄭俊誠, 黃暉笙, 顏宗源, 郭建春, 2008, 新型旋轉伺服馬達驅動二軸動感平台設計與實作, 機械技師學刊, Vol.1, No.2, pp.1-6.
  28. Renn, Jyh-Chyang and Jan, Dian-Yu, 2007, Designing an Energy-saving Pneumatic Vacuum Pad for Automated Manufacturing System, JMES, Proc. Instn. Mech. Engrs, Part C, Vol.221, No.12, pp.1679-1685. (SCI, EI)
  29. Renn, Jyh-Chyang and Wu, Tsung-Han, 2007, Modeling and Control of A New 1/4T Servo-hydraulic Vehicle Active Suspension System, J. of Marine Science and Technology, Vol.15, No.3, pp.265-272. (EI)
  30. Renn, Jyh-Chyang, Yang, Yi-An and Chan, Cherng-Shyong, 2006, Developing a Moving-Coil Actuator for Nano-imprint Lithography System, Material Science Forum, Vol. 505-507, No.1, pp. 1027-1032. (SCI, EI)
  31. Renn, Jyh-Chyang and Tsai, Chen, 2005, Development of An Unconventional Electro-Hydraulic Proportional Valve with Fuzzy-Logic-Controller for Hydraulic Presses, Int. J. of Advanced Manufacturing Technology, Vol. 26, pp. 10-16. (SCI)
  32. Renn, Jyh-Chyang and Chen, Hong-Ming, 2005, Design of a Novel Semi-active Suspension for Motorcycles with Fuzzy-Sliding Mode Controller, J. of the CSME, Vol. 3, pp. 287-296. (EI)
  33. Chen, Hong-Ming, Renn, Jyh-Chyang and Su, Juhng-Perng, 2005, Sliding Mode Control with Varying Boundary Layers for an Electro-hydraulic Position Servo System, Int. J. of Advanced Manufacturing Technology, Vol. 26, pp. 117-123. (SCI)
  34. Renn, Jyh-Chyang and Liao, Chi-Min, 2004, A Study on the Speed Control Performance of A Servo-Pneumatic Motor and the Application to Pneumatic Tools, Int. J. of Advanced Manufacturing Technology, Vol. 23, pp. 572-576. (SCI, EI)
  35. Renn, Jyh-Chyang and Hsiao, Chih-Hung, 2004, Experimental and CFD Study on the Mass Flow-rate Characteristic of Gas through Orifice-type Restrictor in Aerostatic Bearings, Tribology International, Vol. 37, No. 4, pp. 309-315. (SCI, EI)
  36. Renn, Jyh-Chyang and Chou, Yen-Sheng, 2004, Sensorless Plunger Position Control for a Switching Solenoid, JSME International Journal,Series C, Vol. 47, No. 2, pp. 637-645. (SCI, EI)
  37. Renn, Jyh-Chyang and Chern, Gwo-Lianq, 2004, Design of a Novel Micro-punching Machine Using Proportional Solenoid, J. of the CSME, Vol. 25, No. 1, pp. 89-93. (EI)
  38. Renn, Jyh-Chyang, Xu, Zheng-Liang, 2003, State-space Modeling and FEM Design of Moving-coil Transducer for Fluid-technical Proportional Valves, J. of the CSME, Vol. 24, No. 2, pp. 119-125.91-1103. (EI)
  39. Renn, Jyh-Chyang, Kao, Tien-Chia, 2002, Designing a Power-saving 4/3 Oil Hydraulic Directional Solenoid Valve, J. of Science and Technology, Vol. 11, No. 5, pp. 331-340.
  40. Renn, Jyh-Chyang, Chen, Kei-Je, 2002, Design of a Novel Unbalanced-type Hydraulic Cartridge Valve with Faster Response, J. of the CSME, Vol. 23, No. 5, pp. 481-486. (EI)
  41. Renn, Jyh-Chyang, 2002, Position Control of A Pneumatic Servocylinder Using Fuzzy-sliding Surface Controller, Int. J. of Fluid Power, Vol. 3, No. 3, pp. 19-25. (EI)
  42. Renn, Jyh-Chyang, 2002, Position Control of A Pneumatic Servo cylinder Using Fuzzy-Sliding Surface Controller, Int. J. of Fluid Power, Vol. 3, No. 3, pp. 19-25. (EI)
  43. Chen, Hong-Ming, Su, Juhng-Perng and Renn, Jyh-Chyang, 2002, A Novel Sliding Mode Control of an Electrohydraulic Position Servo System, IEICE TRANS. on Fundamentals of Electronics, Vol. E85-A, No. 8. (SCI, EI)
  44. Renn, Jyh-Chyang, Wu, Chi-Hung, 2001, Measurement Analysis and Design of Switching Solenoids by FEM and Equivalent Circuit Methods, J. of Science and Technology, Vol. 10, No. 2, pp. 79-88.
  45. Renn, Jyh-Chyang, Lin, Tzung-I, 2001, Research on a Pneumatic Proportional Pressure Control Valve, J. of the CSME, Vol. 22, No.5, pp. 443-450. (EI)
  46. Renn, Jyh-Chyang and Wu, Jiunn-Min, 2000, Analysis and Compensation of the flow force in a 4/3 Oil Hydraulic Directional Solenoid Valve, J. of the CSME, Vol. 21, No. 2. (EI)
  47. Renn, Jyh-Chyang and Lin, Zong-Yi, 2000, Designing a Two-stage Pneumatic Proportional Pressure Control Valve for the Low-pressure Die-casting Machine, J. of Science and Technology, Vol. 9, No. 2, pp. 81-88.
  48. Renn, Jyh-Chyang and Chen, Chuen-Jyh, 1999, A new Open-loop Test Device and a Nonlinear Model for the Proportional Solenoids, J. of Science and Technology, Vol. 8, No. 3, pp. 185-191.
  49. Renn, Jyh-Chyang and Chen, Wen-Jen, 1998, Control of a Servohydraulic Positioning System using State-space Controller with Grey Forecasting, JSME International Journal,Series C, Vol. 41, No. 3, pp. 391-397. (SCI, EI)
  50. Renn, Jyh-Chyang, 1997, A New Approach to synthesize the Feedback Gains of State-space Controller for a Servohydraulic Positioning Systems, J. of Control systems and Technology, Vol.5, No.1, pp. 51-59. (EI)
  51. Renn, Jyh-Chyang, 1995, A Rule-based Control Algorithm for a Servohydraulic Oscillator, J. of the CSME, Vol. 16, No. 1, pp. 75-80. (EI)
  52. Renn, Jyh-Chyang, 1994, Steuerung der Oszillationsbewegung durch den Einsatz Von Endschaltern, O+P, Vol. 38, No. 6, pp. 362-365.
  53. Renn, Jyh-Chyang, 1992, Prototyp eines mechanisch-hydraulischen Oszillators, O+P, Vol. 36, No. 11, pp. 760-762.
  54. Shin, M.C. and Renn, Jyh-Chyang, 1988, Hydraulik erzeugt Wellen, O+P, Vol. 32, No. 12, pp. 830-832.
二、研討會論文
  1. Chin-Yi Cheng, Jyh-Chyang Renn, Chen-En Shi and Saputra Ilham, 2022, Integrating Convolutional Neural Networks for Window Motor Sound Quality Recognition System, Proceedings of the 19th International Conference on Automation Technology (Automation 2022), 2022/11/11-13, NKUST, Kaohsiung, Paper ID: 1018.
  2. Chin-Yi Cheng, Jyh-Chyang Renn, Ilham Saputra and Chen-En Shi, 2022, Smart Grasping of A Soft Robotic Gripper using NI Vision Builder Automated Inspection based on LabVIEW Program, Proceedings of 11th International Conference on Power Science and Engineering (ICPSE 2022), 2022/09/23-25, IEEE, Eskisehir, Turkey, Paper No: CR807.
  3. Chin-Yi Cheng, Jyh-Chyang Renn, Shyang-Jye Chang and Ilham Saputra, 2021, Development of a Simple Servo-Pneumatic 3-DOF Pick-and-Place Manipulator, Proceedings of 11th JFPS International Symposium on Fluid Power (Online), 2021/10/12-13, IFPA, Hakodate, Japan, Paper No: C000010.
  4. 鄭秦亦, 任志強, 邱耀民, 王奕智, 2020, 手持裝置 Wi-Fi 通訊應用於流體元件運動控制之研究, 中國機械工程學會第37屆全國學術研討會論文集, 2020/11/20-21, 中國機械工程學會, 虎科大, 虎尾, 雲林, Paper No. 285.
  5. 任志強, 2020, 比例電磁線圈設計演進, 台灣區流體傳動工業同業公會創會30週年紀念專刊技術類論文集, 2020/08/20, TFPA, 台灣台北, pp.73-78.
  6. 任志強, 鄭秦亦, 謝佾哲, 黃奕凱, 楊純賓, 2019, FEM應用於液壓懸吊比例線圈設計分析, 中國機械工程學會第36屆全國學術研討會論文集, 2019/12/06-07, CSME, 台灣台北, Paper No: 00166.
  7. Renn, Jyh-Chyang, Xie, Yi-Zhe, Huang, Yi-Kai, Cheng, Chin-Yi and Yang, Chun-Bin, 2019, FEM Design of Proportional Solenoid for Hydraulic Proportional Suspension Damper, Proceedings of 8th Int. Multi-Conference on Engineering and Technology Innovation (IMETI 2019), 2019/11/15-17, IEEE, 台灣高雄, Paper No: J9004.
  8. Renn, Jyh-Chyang, Xie, Yi-Zhe, Cheng, Chin-Yi and Yang, Chun-Bin, 2019, Application of CFD to the Design of Hydraulic Proportional Damper, Proceedings of 6th Annual Conference on Engineering and Information Technology (ACEAIT 2019), 2019/03/26-28, IEEE, 日本, 京都, Paper No: 0238.
  9. 任志強, 鐘晟元, 江柏穎, 2018, 3D列印氣壓閥件之ISO6358質流量分析與研究, 中國機械工程學會第35屆全國學術研討會論文集, 2018/11/30-2018/12/01, 中正大學, 嘉義, 中正大學, Paper No: 0119.
  10. 任志強, 謝佾哲, 楊純賓, 2018, CFD於液壓懸吊阻尼器之設計研究, 中國機械工程學會第35屆全國學術研討會論文集, 2018/11/30-2018/12/01, 中正大學, 嘉義, 中正大學, Paper No: 0118.
  11. 任志強, 余佩蓁, 林志勝, 2018, 伺服氣壓三軸自動化裝配機器臂研發, 中華民國第42屆全國力學會議論文集, 2018/11/23-24, 台北科技大學, 台北市,北科大, Paper No: 1019.
  12. Renn, Jyh-Chyang, Cheng, Chin-Yi and Jiang, Bo-Ying, 2018, Novel Bluetooth Hydraulic Solenoid Valve, Proceedings of the 6th International Technical Conference (ITC) 2108, 2018/10/04-06, Politeknik Semarang, Semarang, pp.ME-02.
  13. Renn, Jyh-Chyang, Wu, Guang-Yi, 2018, Active Closed-Loop Gap Control for Hydrostatic Bearing, Proceedings of Int. Conf. on Machining, Materials and Mechanical Technology 2018 (IC3MT), 2018/09/19-22, University of Ho-Chi-Minh City, Ho-Chi-Minh City, pp.2363.
  14. Wang, Chung-Lun, Renn, Jyh-Chyang, 2018, Study on the Motion Control of Pneumatic Actuator via Wireless Bluetooth Communication, Proceedings of the 4th International Conference on Applied System Innovation (IEEE ICASI 2018), 2018/04/14-16, IEEE - TIKI, Chiba, Tokyo, pp.J180213.
  15. Renn, Jyh-Chyang, 2018, Application of Pneumatic Muscle Actuator to Pulse Diagnosis System of Chinese Therapy, Proceedings of the 11th Int. Fluid Power Conf, 2018/03/19-21, IFAS, RWTH, RWTH Aachen, pp.412-419.
  16. Renn, Jyh-Chyang, Jhan, Cian-Wei, 2017, A Full-Digital Quasi-Proportional Force Output Solenoid, Proceedings of the 14th International Conference on Automation Technology (Automation 2017), 2017/12/08-10, 中山大學, Kaohsiung, Taiwan, Paper ID: 1006.
  17. 任志強, 王宗倫, 2017, 行動裝置藍芽無線通訊於氣壓執行元件運動控制之研究, 中國機械工程學會第34屆全國學術研討會論文集, 2017/12/01-02, 中國機械工程學會，勤益科大, 台中，台灣, Paper No: 09731.
  18. Renn, Jyh-Chyang, Zeng, Jian-Siang, 2017, A New Vacuum Generator Based On Tornado-Like Vortex Flow, Proceedings of 10th JFPS International Symposium on Fluid Power, 2017/10/24-28, JFPS, Fukouka, Japan, Paper No: 2B-19.
  19. Renn, Jyh-Chyang, Li, Bo-Han, 2017, A Robot Arm Based on Parallel Pneumatic Flexible Muscle Actuators, Proc. of the 2nd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT), 2017/05/19-21, TFITDA, Kenting, Taiwan, Paper No. 29.
  20. 任志強, 何鎮宇, 陳柏融, 2016, 具比例特性之切換式電磁線圈提動頭外型設計研究, 中國機械工程學會第33屆全國學術研討會論文集, 2016/12/03-04, 中國機械工程學會, 工研院, 新竹市, 工研院, Paper No: 1117.
  21. 任志強, 賴清祥, 2016, 氣壓人工肌肉致動器於中醫脈搏診斷量測之應用研究, 第二十四屆全國自動化科技研討會論文集, 2016/11/04-05, 科技部自動化學門, 台中市,中興大學, Paper No:047.
  22. Renn, Jyh-Chyang, Hsu, Wen-Jen and Yun-Ruei Li, 2016, Development of Hydrostatic Bearing with Spool-type Restrictor for Large Single Column Vertical Lathe, Proceedings of 8th International Scientific Conference, Management of Technology (MOTSP 2016), 2016/06/01-03, University of Zagreb, Croatia, Porec, Croatia, Paper No.: 124.
  23. 廖泳竣, 任志強, 2015, 行動裝置數位相機濾片無接觸式吸附裝置開發, 中國機械工程學會第32屆全國學術研討會論文集, 2015/12/11-12, 高雄應用科大, 高雄，台灣, pp.0029.
  24. Renn, Jyh-Chyang, Hsu, Wen-Jen and Yun-Ruei Li, 2015, Innovative Design of a Spool-Type Pressure Feedback Restrictor for Hydrostatic Bearing, Proceeding of International Conference on INVENTIONS 2015, 2015/11/27-29, 中興大學, Sun Moon Lake, pp.78.
  25. 許哲維, 任志強, 2015, 具流動力補償之節能氣壓電磁閥設計與分析, 中華民國第39屆全國力學會議論文集, 2015/11/20-21, 台灣科大, 台北，台灣, pp.E-1016.
  26. Renn, Jyh-Chyang, Hsu, Wen-Jen and Yun-Ruei Li, 2015, A Novel Spool-Type Pressure Feedback Restrictor for Hydrostatic Bearing, Proceedings of the 13th International Conference on Automation Technology (Automation 2015), 2015/11/13-15, 自動化學會, Taipei, Taiwan, pp.585-589.
  27. Renn, Jyh-Chyang, Hsu, Wen-Jen and Li, Yun-Ruei, 2015, Constant Pressure Control for Energy Efficient Lathe Turret, Proc. of the 1st International Conference on Precision Machinery and Manufacturing Technology (ICPMMT), 2015/05/22-25, Kenting, Taiwan, Paper No.: 39.
  28. Renn, Jyh-Chyang, Chiou, Yaw-Ming, 2014, Active Closed-Loop Gap Control for Aerostatic Bearing, Proceeding of the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES 2014), 2014/12/19-21, 正修科大, Kaohsiung, Taiwan, ID.203.
  29. 廖偉成, 任志強, 2014, 液壓節能車床設計分析, 中國機械工程學會第31屆全國學術研討會論文集, 2014/12/06-07, 逢甲大學, 台中，台灣, No.00030.
  30. 邱耀民, 任志強, 2014, 主動式氣靜壓軸承之氣膜間隙閉迴路控制系統研究, 第二十二屆全國自動化科技研討會論文集, 2014/11/14-15, 虎科大, 虎尾，台灣, pp.167.
  31. Renn, Jyh-Chyang, Cheng, Chin-Yi and Liao, Wei-Cheng, 2014, Novel Continuous Variable Current Control for a Full-Digital Pneumatic Cylinder Position Control System, Proceedings of 9th JFPS International Symposium on Fluid Power, 2014/10/27-30, JFPS, Matsue, Japan, 1B1-1, p. 8.
  32. Renn, Jyh-Chyang, Ho, Nien-Ting, 2014, 2014, Development of a Proportional Linear Motor for Fluid Power Valves, Proc. of IFSM, International Forum on Systems and Mechatronics, 2014/10/12-15, NCKU, NCKU, Tainan, Taiwan, Paper No.: G04.
  33. Renn, Jyh-Chyang, Hsu, Wen-Jen and Liao, Wei-Cheng, 2014, Energy Efficient Lathe Turret Design Using Load Sensing Control Scheme, Proceedings of the 2014 International Symposium on Computer, Consumer and Control (IS3C 2014), 2014/06/02-05, 勤益科大, Taichung, Taiwan, pp.51-54.
  34. Renn, Jyh-Chyang, Cheng, Chin-Yi and Ho, Nien-Ting, 2014, Two-stage Large-stroke Proportional Linear Motor, Proceedings of the 9th Int. Fluid Power Conference, 2014/03/26-29, IFAS, Aachen, Germany, pp.220-229.
  35. Renn, Jyh-Chyang, Cheng, Chin-Yi and Ho, Nien-Ting, 2013, Large-stroke Control of a Telescopic Two-stage Linear Motor, Proceeding of the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES 2013), 2013/12/13-15, 正修科大, Kaohsiung, Taiwan, Paper. ID: 249.
  36. 何念庭, 任志強, 2013, 二段式線性馬達於精密長行程控制之設計, 中國機械工程學會第30屆全國學術研討會論文集, 2013/12/06-07, 中國機械工程學會, 宜蘭, 台灣, Paper No: 1032.
  37. Lin, Meng-Han, Renn, Jyh-Chyang and Hsu, Wen-Jen, 2013, Design of a Novel Energy Efficient Hydraulic Tube Bender, Proceeding of 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & 1st International Conference on Mechanics (1st ICM), 2013/11/08-09, 中華民國力學學會, 新竹, 台灣, Paper ID: 08,.
  38. Renn, Jyh-Chyang, Hsu, Wen-Jen and Liao, Wei-Cheng, 2013, Energy Efficient Design for a Hydraulic Lathe Turret, Proceedings of the 131th International Conference on Automation Technology (Automation 2013), 2013/11/01-02, 中華民國自動化學會, Tainan, Taiwan, Paper No.: L001, p..
  39. 任志強, 陳俞成, 2013, 2013, 應用CFD-RC以及田口分析方法設計新型類龍捲風真空產生器與實作研究, 台灣真空學會2013年度會員大會及論文發表會論文集 (TVS-2013), 2013/10/25-26, 台灣真空學會, 台南，台灣, Paper No.: 021.
  40. Renn, Jyh-Chyang Cheng, C. Y. and Lin, M. H., 2013, Energy-Saving Design for Hydraulic Tube Bender, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 2013/06/03-05, 林溪坪大學, 瑞典, Linkoeping, Sweden, Paper No.: 0009.
  41. 任志強, 鄭秦亦, 吳尚儒, 李柏翰, 2013, 並聯式四軸氣壓撓性致動器人工手臂之設計與研究, 2013台灣智慧型機器人研討會論文集, 2013/05/31-2013/06/02, 台灣機器人學會, 台南，台灣, pp. 132-137.
  42. Renn, Jyh-Chyang, Su, Huan-kai, 2013, Virtual Instrument to Acquire the P/Q Characteristic Curve of a Pneumatic Pressure Regulator, Proceedings of the 8th International Conference on Fluid Power, 2013/04/09-11, 浙江大學, Hangzhou, China, Paper No.: F02.
  43. 任志強, 鄭秦亦, 吳尚儒, 李柏翰, 2013, 具四軸氣壓撓性致動器應用於人工手臂控制之研究, 第二十屆人因工程學會年會暨學術研討會(EST2013)論文集, 2013/03/18-19, 中華民國人因工程學會, 台北，台灣, Paper No: E04.
  44. 李柏翰, 任志強, 2012, 氣壓撓性致動器應用於人工手臂運動控制之設計與研究, 中國機械工程學會第29屆全國學術研討會論文集, 2012/12/07-08, CSME, 高雄 中山大學, pp.1027.
  45. 谷亞帆, 任志強, 2012, 液壓缸端點緩衝器理論模擬及CFD分析研究, 中華民國第36屆全國力學會議論文集, 2012/11/16-17, 中華民國力學學會, 中壢 中央大學, pp.A053.
  46. Cheng, Chin-Yi, Renn, Jyh-Chyang, 2012, Improving the Steady-State Response of Full-Digital Pneumatic Motor Speed Control Using Two-Step Current Control Scheme, Proceedings of the 2012 International Symposium on Computer, Consumer and Control (IS3C 2012), 2012/06/04-05, IEEE, Taichung, pp.573-576.
  47. Renn, Jyh-Chyang, 2012, Reducing the Limit Cycle Oscillation of a Full-Digital Pneumatic Motor Speed Control System, Proceedings of the 8th Int. Fluid Power Conf. Vol. 3, 2012/03/26-28, TU Dresden, Dresden, Germany, pp.293-304.
  48. 任志強, 蘇渙凱, 2011, 應用ISO6953規範及CFD虛擬量測技術於氣壓調壓閥特性之研究, 中國機械工程學會第28屆全國學術研討會論文集, 2011/12/10-11, 台中，台灣, pp.A-04-002.
  49. 任志強, 蔡名軒, 2011, 液壓節能邏輯閥CFD分析設計, 中華民國第35屆全國力學會議論文集, 2011/11/18-19, Tainan, Taiwan, pp.233.
  50. 任志強, 鄭秦亦, 2011, 液壓彎管機節能設計, 2011流體傳動與自動化控制技術研討會論文集, 2011/11/18, TFPA, Douliou, Taiwan, pp.141-152.
  51. 任志強, 2011, 晶圓及太陽能板絕無接觸式真空吸附裝置, 2011流體傳動與自動化控制技術研討會論文集, 2011/11/18, TFPA, Douliou, Taiwan, pp.39-50.
  52. Renn, Jyh-Chyang, Cheng, Chin-Yi and Lee, Po-Han, 2011, Horizontal Control of a Tilt-meter System Using Pneumatic Muscle Actuator, Proceedings of the 11th International Conference on Automation Technology (Automation 2011), 2011/11/17-20, Douliou, Taiwan, pp.38.
  53. Cheng, Chin-Yi and Renn, Jyh-Chyang, 2011, Reducing the steady-state error by two-step current input for a full-digital pneumatic motor speed control, Proceedings of 8th JFPS International Symposium on Fluid Power, 2011/10/20-23, Okinawa, Japan, pp.97.
  54. 鄭秦亦, 李柏翰, 任志強, 2011, 氣壓人工肌肉致動器於水平儀之精密水平控制, Proceedings of 2011 National Symposium on System Science and Engineering, 2011/06/14-15, Nan-Tou, Taiwan, pp.0373.
  55. Renn, Jyh-Chyang, Shigeru Ikeo and Cheng, Chin-Yi, 2010, A Simple Switching Control Structure for Improving the Steady-State Error of a Full-Digital Water-Hydraulic Cylinder Position Control, Proceedings of the 4th Asia International Symposium on Mechatronics (AISM 2010), 2010/12/15-18, NUS, Singapore, pp.308-313.
  56. 蔡名軒, 任志強, 2010, 4-land 電磁閥CFD流動力補償模擬研究, 中華民國第34屆全國力學會議論文集, 2010/11/19-20, 國立雲林科技大學, 斗六市, pp.I-2005.
  57. 鄭秦亦, 蔡名軒, 任志強, 2010, 綠色節能液壓疊層多路閥之流動力補償研究, 第17屆全國計算流體力學學術研討會論文集, 2010/07/29-31, 中央大學, 中壢,中央大學, pp.N-02.
  58. Renn, Jyh-Chyang and Liao, Bo-Jyun, 2010, A Novel Linear Motor with Movable Integrated Permanent Magnets, Proceedings of the 7th Int. Fluid Power Conference, Vol. 2, 2010/03/22-24, IFAS, RWTH Aachen, Aachen, Germany, pp.343-354.
  59. 任志強, 2009, 動感平台之慣性與摩擦參數識別, 中國機械工程學會第26屆全國學術研討會論文集, 2009/11/20-21, 成大, 台南市,成大, pp.Paper No. B06-001.
  60. 任志強, 2009, 新型伺服馬達直驅式二軸運動平台設計與實作, 中國機械工程學會第26屆全國學術研討會論文集, 2009/11/20-21, 成大, 台南市,成大, pp.Paper No. B08-001.
  61. 任志強, 2009, 混合PNM與二進制之全新編碼應用於氣壓比例定位控制系統, 中國機械工程學會第26屆全國學術研討會論文集, 2009/11/20-21, 成大, 台南市,成大, pp.Paper No. B15-004.
  62. 任志強, 2009, A Novel Full-Digital Pneumatic Fuzzy-Logic Position Control, Proceedings of the 10th International Conference on Automation Technology (Automation 2009), 2009/06/27-29, 成大, 台南市,成大, pp.Paper No.: 0258.
  63. 任志強, 2009, Position Control of a Pneumatic Rodless Cylinder Using Full-digital Nonlinear Coding Scheme, Proceedings of the 7th International Conference on Fluid Power, 2009/04/07-09, 浙江大學, Hangzhou, pp.555-560.
  64. Renn, Jyh-Chyang, Yi-Hao Yang, Chin-Yi Cheng, Chin-Yi Hung, 2008, Position Control of a Pneumatic Rodless Cylinder Using Full-digital Control Scheme, Proceedings of 2008 CACS International Automatic Control Conference, 2008/11/21-23, 成大, No.: 00086.
  65. 任志強, 楊翼豪, 黃進義, 2008, 全數位化氣壓比例定位控制系統設計, 中國機械工程學會第25屆全國學術研討會論文集, 2008/11/21-22, 大葉大學, No. 0156.
  66. 鄭秦亦, 任志強, 2008, 氣壓伺服倒單擺系統設計與控制, 中國機械工程學會第25屆全國學術研討會論文集, 2008/11/21-22, 大葉大學, No. 0155.
  67. 任志強, 2008, Constant Gap and Minimum Energy Supply Control for a Proportional Pneumatic Vacuum Pad, Proceedings of 7th JFPS International Symposium on Fluid Power, 2008/09/15-18, Toyama, pp.453-456.
  68. Renn, Jyh-Chyang, Jan, Dian-Yu, Lu, Chia-Hua, 2008, Development of a New Proportional Non-contacting Pneumatic Vacuum Pad, Proceedings of IFPE 2008 Technical Conference, 2008/03/11-15, Las Vegas, pp.217-221.
  69. Renn, Jyh-Chyang, Lu, Chia-Hua, Hung, Chia-Yi and Gao, Zhi-Hung, 2007, Active Suspension System Design for an Aircraft Hydraulic Power Car, Proc. of IFSM, International Forum on Systems and Mechatronics, 2007/12/03-04, 台南成大.
  70. 任志強, 鄭俊誠, 林松崑, 顏宗源, 2007, 六軸動感平台結合虛擬實境之控制, 中國機械工程學會第24屆全國學術研討會論文集, 2007/11/23-24, 中壢中原大學, pp.D05-0026.
  71. 任志強, 詹典育, 2007, 新型低成本握把式氣壓真空吸盤研發, 中國機械工程學會第24屆全國學術研討會論文集, 2007/11/23-24, 中壢中原大學, pp.B16-0014.
  72. 任志強, 呂嘉華, 黃進義, 高誌鴻, 2007, 伺服液壓動力車主動式懸吊系統建模與控制模擬, 中國機械工程學會第24屆全國學術研討會論文集, 2007/11/23-24, 中壢,中原大學, pp.B16-0004.
  73. 林柏奇, 任志強, 2006, 改良式基因演算結合PID應用於變動負載液壓缸之定位及追蹤控制, 中國機械工程學會第23屆全國學術研討會論文集, 2006/11/24-25, 台南縣,崑山科大, p.138.
  74. 詹典育, 任志強, 2006, 應用CFD模擬於新型氣壓真空吸盤設計, 中國機械工程學會第23屆全國學術研討會論文集, 2006/11/24-25, 台南縣,崑山科大, p.135.
  75. Renn, Jyh-Chyang and Fan, Kuang-Jung, 2006, A New Piezo-Buzzer Actuator for Fluid Power Valves, Proceedings of the 5th Int. Fluid Power Conf., 2006/03/20-22, Aachen, pp. 315-324.
  76. Renn, Jyh-Chyang, Yang, Yi-An and Chan, Cherng-Shyong, 2005, Developing a Moving-Coil Actuator for Nano-imprint Lithography System, Proceedings of ICAM 2005, Taipei.
  77. 葉泰佑, 任志強, 2005, 汽車用液壓無段式半主動懸吊避震器研發, 中國機械工程學會第22屆全國學術研討會(論文集)(B3-016), 2005/11/25-26, 桃園(中央大學), pp. B3-016.
  78. Renn, Jyh-Chyang and Yang, Jia-Feng, 2005, A New Mass Flow-rate Model of Gas Through Orifice-Type Restrictors in Aerostatic Bearings, Proceedings of the Sixth JFPS International Symposium on Fluid Power Tsukuba, 2005/11/07-10.
  79. 任志強, 鄭俊誠, 吳宗翰, 楊佑良, 簡明溫, 2005, 應用ADAMS軟體設計主動式懸吊系統及其實作研究, 第十三屆中華名國振動與噪音工程學術研討會, 2005/06/03, 彰化(大葉大學).
  80. 楊加風, 任志強, 2004, 氣體軸承節流孔口之氣體質流量CFD分析與實驗研究, 中國機械工程學會第21屆全國學術研討會, 2004/11/26-27, 高雄(中山大學).
  81. 范光榮, 任志強, 徐亞珅, 2004, 金屬熱處理工廠自動化控制之研究, 中國機械工程學會第21屆全國學術研討會, 2004/11/26-27, 高雄(中山大學).
  82. 李忠龍, 任志強, 2004, 互補式順滑模態控制器應用於負載調變液壓缸之定位及追蹤控制研究, 中國機械工程學會第21屆全國學術研討會, 2004/11/26-27, 高雄(中山大學).
  83. 洪乾財, 任志強, 2003, 改良式順滑模態控制於液壓伺服系統控制之研究, 中國機械工程學會第20屆全國學術研討會控制與自動化(論文集)(B03-02), 2003/12/05-06, 台北(台灣大學), pp. B03-02.
  84. 周晏聲, 任志強, 2003, 切換式電磁線圈之無感測器定位控制, 中國機械工程學會第20屆全國學術研討會控制與自動化(論文集)(B03-01), 2003/12/05-06, 台北(台灣大學), pp. B03-01.
  85. Renn, Jyh-Chyang and Kao, Tien-Chia, 2003, Application of CFD to Design a Power-saving Hydraulic Directional Two-land-four-way Valve, Proc. of 1st Int. Conf. on Computational Methods in Fluid Power Technology, 2003/11/26-28, Melbourne, pp. 83-94.
  86. 廖麒閔, 任志強, 2002, 應用模糊滑動平面控制於氣壓伺服系統之研究, 中國機械工程學會第19屆全國學術研討會控制與自動化(論文集), 2002/11/29-30, 雲林(虎尾科技大學), pp. B3-002.
  87. 徐正亮, 任志強, 2002, 應用有限元素法分析動圈式電機械換能器及其在液氣壓閥類設計之研究, 中國機械工程學會第19屆全國學術研討會控制與自動化(論文集), 2002/11/29-30, 雲林, 虎尾, pp. B3-003.
  88. Renn, Jyh-Chyang, Tsai, Chen, 2002, Linearization of the Force/Stroke Characteristic of Switching Solenoid using Fuzzy-Logic-Controller, Proc. of Fifth JFPS International Symposium on Fluid Power, 2002/11/12-15, Nara, pp. 193-198.
  89. Chen, Hong-Ming, Su, Juhng-Perng and Renn, Jyh-Chyang, 2002, Sliding Mode Control of Nonlinear Systems with a Soft Switching Strategy in the Boundary Layer, Proc. of the 4th Asia Control Conference, 2002/09/25-27, pp. 1664-1669.
  90. Renn, Jyh-Chyang, Tsai, Chen, 2002, Appling Fuzzy-Logic-Controller on the Linearization of Force/Stroke Characteristic of Switching Solenoid, Proc. of IEEE/ASME International Conference on Advanced Manufacturing, 2002/08/11-14, Chia-Yi, pp. 80.
  91. 蔡呈, 任志強, 2001, 切換式電磁線圈比例線性化之研究, 中國機械工程學會第18屆全國學術研討會控制與自動化(論文集), pp. 381-388.
  92. 陳開杰, 任志強, 2001, 應用流動力補償技術於液壓邏輯閥設計分析之研究, 中國機械工程學會第18屆全國學術研討會控制與自動化(論文集), pp. 389-394.
  93. Chen, Hong-Ming, Su, Juhng-Perng and Renn, Jyh-Chyang, 2001, Electro-hydraulic Position Control Using a Soft Switching Strategy in the Boundary Layer, Proc. of the Automatic Control Conference, pp. 88-93.
  94. Chen, Hong-Ming, Su, Juhng-Perng and Renn, Jyh-Chyang, 2001, A Novel Sliding Mode Control of an Electrohydraulic Position Servo System, Proc. of the 22nd Symposium on Electrical Power Engineering, Kaohsiung, pp. 1026-1031.
  95. 蔡呈, 任志強, 2000, 應用 DSH plus 軟體於液壓比例方向閥之設計研究, 第1屆台灣流體傳動與控制技術研討會(論文集), pp. 193-199.
  96. 陳國亮, 任志強 等, 2000, 利用比例電磁線圈於微衝壓系統及微小衝頭製作研究, 中國機械工程學會第17屆全國學術研討會新興工程技術-微機電系統(一)(論文集), pp. 25-31.
  97. 林宗憶, 任志強, 2000, 應用 CFD於一級式氣壓比例壓力閥之設計研究, 中國機械工程學會第17屆全國學術研討會控制與自動化(論文集), pp.145-152.
  98. Renn, Jyh-Chyang and Liu, Jia-Song, 2000, Sensorless Position Control of a Proportional Solenoid, Proc. of the 2nd International Fluid Power Conference (2. IFK), Dresden, pp. 453-466.
  99. 劉家嵩, 林宗億, 任志強, 1999, 液氣壓比例電磁線圈之無感測器定位控制, 中國機械工程學會第16屆全國學術研討會控制與自動化組(論文集), pp. 303-310.
  100. 鄭國銘, 羅斯維, 任志強, 1998, 設計與應用小型位移感測於板金深引伸製程, 中國機械工程學會第15屆學術研討會製造(論文集), pp. 197-204.
  101. 吳俊明, 任志強, 1998, 應用CFD於液壓比例方向閥閥桿缺口形狀之建立, 中國機械工程學會第15屆學術研討會控制與自動化(論文集), pp. 113-118.
  102. 陳春志, 任志強, 1997, 液壓比例電磁線圈非線性數學模式之建立, 中國機械工程學會第14屆學術研討會(論文集Ⅱ), pp. 364-369.
  103. 汪島軍, 任志強, 1997, 氣壓電磁閥可靠度估測技術, 中國機械工程學會第14屆學術研討會(論文集Ⅱ), pp. 359-363.
  104. 任志強, 汪島軍, 1997, 灰色預測應用於氣壓電磁閥可靠度估測之研究, Proc. of the 2nd R.O.C. Symposium on Reliability and Maintenance, pp. 119-127.
  105. 任志強, 1997, 比例閥控變量斜板式柱塞泵之簡化模型分析與設計, 第12屆全國技術及職業教育研討會(論文集)(工業類III), pp. 85- 92.
  106. Renn, Jyh-Chyang, 1997, A Grey Forecasting Model for the Prediction of Fatigue Failure of Pneumatic Solenoid Valves, Proc. of the 4th International Conf. On Fluid Power Transmission and control, Hangzhou, pp. 331-335.
  107. 任志強, 戴智祥, 1996, 伺服油壓振盪器模糊控制之研究, 第11屆全國技術及職業教育研討會(論文集)(工業類 I), pp. 11-20.
  108. 任志強, 1996, 氣壓電磁閥疲勞損壞灰色預測之研究, 中國機械工程學會第13屆全國學術研討會控制組(論文集), pp. 368-375.
  109. 任志強, 唐永泰, 1995, 氣壓電磁閥特性量測裝置之設計, 中國工程師學會高雄分會84年度學術研討會(論文集), pp. 13-17.
  110. 任志強, 沈更新, 1995, 氣壓電磁閥疲勞測試裝置設計與實驗研究, 第10屆全國技術及職業教育研討會(論文集)(工業類I), pp. 21-27.
  111. 任志強, 1994, 智慧控制器應用於伺服油壓振盪機之研究, 中國工程師學會高雄分會83年度學術研討會(論文集), pp. 62-65.
  112. Renn, Jyh-Chyang, 1992, Erweiterung des Konzepts der Zustandsregelung in elektro- hydraulischen Servosystem, Proc. of 2. Deutsch-chain. forschung and Akademie, pp. 59-66.
  113. 任志強, 1991, 往復運動型振盪器之分類比較研究, Proc. of the IX CAPE Annual convention, pp. 184-189.
三、專書及專書論文
  1. Renn,Jyh-Chyang, 1993, Entwicklung mechanisch-hydraulsicher and elektro-hydraulischer Oszillatorschtungen, RWTH Aachen, Germany.
四、技術報告
  1. 任志強, 曾建翔, 陳俞成, 2014, 仿龍捲風狀氣旋式真空產生器. (執行期間：2014/11~2024/10)
  2. 任志強, 2010, 非接觸式真空吸盤組. (執行期間：無)
  3. 任志強, 2005, 真空吸盤(二). (執行期間：2005/10~2015/4)
  4. 任志強, 2005, 真空吸盤(一). (執行期間：2005/9~2015/4)
  5. 任志強, 2003, 機車半主動之前懸震器, 新型第214161號.
  6. 任志強,詹程雄, 2001, 氣壓控制實驗台, 新型第173317號.
  7. 任志強, 2000, 指針型液壓流量表, 新型第164764號.
五、其他論著
  1. 任志強, 2017, 基於氣壓撓性致動器之人工手臂輔具設計與研究, 機械新刊, Vol.2, No.6, pp.46-56.
  2. 任志強, 許哲維, 2015, 氣壓節能電磁閥CFD設計, 機械月刊, Vol.41, No.11, pp.34-45.
  3. 任志強, 吳尚儒, 2015, 可代勞中醫師把脈之氣壓自動化脈診量測裝置, 技術通報, Vol.248, No.2015-10, pp.31-34.
  4. 任志強, 廖偉成, 2014, 液壓節能車床刀塔設計, 機械月刊, Vol.40, No.11, pp.36-48.
  5. 鄭秦亦, 任志強, 2013, 應用全數位氣壓類伺服閥於氣壓缸精密定位控制之研究, 機械月刊, Vol.39, No.5, pp.48-57.
  6. 蕭坤榮, 任志強, 2012, 工具機油壓系統節能方案簡介, 機械月刊, Vol.38, No.6, pp.129-134.
  7. 任志強, 2012, 小行程線性馬達致動器應用於流體傳動比例閥研發, 機械月刊, Vol.38, No.6, pp.116-128.
  8. 任志強, 2011, 結合氣體軸承之無碰撞真空吸盤設計, 機械月刊, Vol.37, No.8, pp.72-77.
  9. 任志強, 2010, 節能液壓4/3方向電磁閥設計研究, 機械月刊, Vol.36, No.7, pp.32-38.
  10. 任志強, 2009, 新型旋轉氣場式非接觸氣壓真空吸盤設計, 機械月刊, Vol.35, No.410, pp.26-30.
  11. 任志強, 2009, 氣壓元件流量特性ISO6358規範與有效段面積S比較研究, 機械零組件通報, Vol.1, No.7, pp.12-14.
  12. 任志強, 楊翼豪, 黃進義, 2008, 全數位化液氣壓比例控制系統簡介與設計, 機械月刊, Vol.34, No.400, pp.52-58.
  13. 任志強, 廖柏鈞, 2008, 具流動力補償之先進結能液壓疊層多路閥研發, 台灣製造工程與自動化科技協會產學合作專輯, Vol.1, No.1, pp.39-43.
  14. 任志強, 2008, 氣壓元件ISO6358質流量特性檢測技術開發, PTC Source動力傳動與控制, Vol.6, No.1, pp.69-76.
  15. 任志強, 2008, 全數位化流體傳動比例控制系統, 機械零組件通報 2008-05, Vol.1, No.2, pp.3-5.
  16. 任志強, 2007, 動圈式氣壓比例閥研發, 96年度流體傳動與控制技術專題研討會論文集, 東海大學, 台灣台中.
  17. 任志強, 2007, 採壓電致動器微位移放大機構之液壓閥設計, 機械月刊, Vol.33, No.379, pp.6-16.
  18. 任志強, 林俊憫, 2006, 電磁式燃油噴射閥之特性分析, 機械月刊, Vol.32, No.376, pp.70-77.
  19. 任志強, 2004, 機車用液壓無段半主動式懸吊系統研發, 機械月刊, Vol. 30, No. 11.
  20. 任志強, 2004, 氣壓懸吊系統原理簡介, 機械月刊, Vol. 30, No. 9, pp. 98-101.
  21. 任志強, 2003, 液氣壓閥用動圈式電-機械換能器簡介及其有限元素法分析, 機械月刊, Vol. 29, No. 2, pp.46-51.91-1103, 91-1103.
  22. 任志強, 2002, 電液閥結構設計基本原理介紹, 機械月刊, Vol. 28, No. 6, pp.7-10.
  23. 任志強, 蔡呈, 2001, 切換式電磁線圈之比例線性化研究, 機械月刊, Vol. 27, No. 7, pp.364-368.
  24. 宋立明, 任志強, 林宗億, 2000, 氣壓比例閥介紹, 金屬工業, Vol. 34, No. 4, pp.118-125.
  25. 任志強, 1999, 99德國漢諾威展參觀見聞輯要, 空油壓工業會訊, No. 19, pp. 20-21.
  26. 任志強, 吳俊民, 1998, 閥軸設計分析軟體簡介, 機械月刊, Vol. 24, No. 6, pp. 302-304.
  27. 任志強, 1997, 壓電材料在液壓閥類之設計應用簡介, 機械月刊, Vol. 23, No. 7, pp. 228-229.
  28. 任志強, 1996, 淺談德國與台灣之大學機械系在油氣壓課程訓練上之比較, 機械月刊, Vol. 22, No. 9, pp. 226-227.
  29. 任志強, 1996, 液壓閥桿或活塞上壓力平衡凹槽之功能及設計方法簡介, 機械月刊, Vol. 22, No. 9, pp. 228-229.
  30. 任志強, 1995, 日本國際空油壓展參觀見聞輯要, 空油壓工業會訊, No. 7, pp. 18-19.
  31. 任志強, 1995, 99德國漢諾威展參觀見聞輯要, 空油壓工業會訊, No. 19, pp. 20-21.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 
SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Register｜logon登入 Login 
國立雲林科技大學 版權所有 c2005 National Yunlin University of Science & Technology, All Rights Reserved.