112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢

  1. 【查詢】按鈕:請先選擇學院→系所→教師,輸入起迄年或不輸入起迄年,再點選【查詢】即完成。
  2. 【進階查詢】按鈕:採用組合查詢的方式。
  3. 【匯出Word檔】按鈕:匯出教師【個人】著作資料。
搜尋條件:著作類別->全部著作 | 學院->College Of Engineering | 系所->Department of Mechanical Engineering | 教師姓名->Tseng Shi-Chang
      
         西元年      
曾世昌老師的論文著述

一、學術期刊論文

  1. 曾世昌, 2023, Design and Manufacturing of Soft Grippers for Robotics by Injection Molding Technology, Advances in Sci., Tech. and Eng. Sys. J., Vol.8, No. 4, pp.11-17. (SCI, EI)(MOST-107-2221-E-224-045, 107-1102)
  2. 曾世昌, 2023, Study on the Application of Magnetic Force to Mold Decoration Formation, Acdem. J. of Polym. Sci., Vol.6, No. 1, pp.1-15. (SCI, EI)
  3. 曾世昌, 2018, A Study on Selectivity and Temperature Coefficients of the Chloride Ion Sensors With RuOx Thin Film, IEEE J ELECTRON DEVI, Vol.7, pp.140-149. (SCI)
  4. 曾世昌, 2018, Nonlinear core deflection in injection molding, Physics of Fluids, Vol.30. (SCI, EI)
  5. 曾世昌, 2018, Investigation of Sensing Characteristic of Flexible Arrayed RuO2 Chlorine Ion Sensor Modified by Graphene Oxide, IEEE T Semiconduct M, Vol.31, pp.295-301. (SCI)
  6. 曾世昌, 2018, Research of Sensing Characteristic and Dynamic Measurement of Graphene Oxides Modified Flexible Arrayed RuO2 Chlorine Ion Sensor, Mater. Res. Bull., Vol.101, pp.155-161. (SCI)
  7. 曾世昌, 2018, Investigation of sensitivities and drift effects of the arrayed flexible chloride sensor based on RuO2/GO at different temperatures, Sensors, Vol.18, pp.1-12. (SCI)
  8. 曾世昌, 2016, Numerical simulation and experimental study on physical mechanism in multiple component moulding, Int. J. Materials and Product Technology, Vol.52, No.1/2, pp.118-142. (EI)
  9. A.J. Giacomin, A.J. Hade, L.M. Johnson, A.W. Mix, Yi-Chang Chen, Hui-Chen Liao, and Shi-Chang Tseng, 2011, Core Deflection in Injection Molding, Journal of Non-Newtonian Fluid Mechanics, Vol.166, pp.908-914. (SCI, EI)
  10. Yi-Chang Chen, Yui-Jang Liao, Shi-Chang Tseng and Alan Jeffery, Giacomin, 2011, Core Deflection in Plastics Injection Molding: Direct Measurement, Flow Visualization and 3D Simulation, Polymer-Plastics Technology and Engineering, Vol.50, pp.863-872. (SCI, EI)
  11. Shi-Chang Tseng, Kai-Jie Chang and Chao-Tsai Huang, 2010, A Study of Warpage and Its Mechanism in the Sequential Overmolding, Journal of Polymer Engineering, Vol.30, No.3-4, pp.189-204. (SCI, EI)
  12. Yi-Chern Hsieh, Jen-Hao Chen, Shi-Chang Tseng, Jinn-Liang Liu, 2009, The effect of band non-parabolicity on modeling few-electron ground states of charge-tunable InAs/GaAs quantum dot, Physica, E, Vol.41, pp.403-407. (SCI, EI)
  13. Z.G. Lin, S.C. Tseng, James Wang and Y.C. Su, 2009, A Novel Guiding Mechanism of Micro Core Pins in the Micro Injection Molding of High-Aspect-Ratio Optical Fiber Ferrules, Polymer Engineering and Science. (Submitted). (SCI, EI)
  14. Shi-Chang Tseng , Kai-Jie Chang and Chao-Tsai Huang, 2008, A Study of Warpage and Its Mechanism in Sequential Overmolding, International Polymer Processing (Submitted). (SCI, EI)
  15. Tseng, Shi-Chang and Shi, Chui-Ting, 2008, Manufacture of Spinnerets for Synthetic Micro-fibers by LIGA and Micro Injection Molding Technique, International Polymer Processing, Vol.23, No.3, pp.277-285. (SCI, EI)
  16. Chao-Tsai Huang, Meng-Chih Chen, Wen-Li Yang, Kai-Jie Chang, and Shi-Chang Tseng, 2007, Investigation on Warpage and Its Mechanism in Sequential Overmolding, Plastic Technology, Asia, No.1, pp.7-12. (其他)
  17. Shi-Chang Tseng, Yi-Chern Chen, Cheng-Hsuan Lin, Bow-Yuen Shew and Chia-Lung Kuo, 2006, A Study of Integration of LIGA and M-EDM Technology on the Micro Injection Molding of Super Thin Plates with Micro Through Holes, International Polymer Processing, Vol.21, No.4, pp.340-347. (SCI, EI)
  18. Shi-Chang Tseng , Yi-Chern Chen, Chia-Lung Kuo and Bow-Yuen Shew, 2005, A Study of Integration of LIGA and M-EDM Technology on The Micro Injection Molding of Ink Jet Printers Nozzle Plates, Journal of Microsystem Technologies(August 25 online), No.12, pp.116-119. (SCI, EI)
  19. Shieh, Y.C., Chen, L.L. and Tseng S.C, 2004, A New Design Method to Improve Flow Uniformity in a Reaction Injection Mold Entry, International Polymer Processing, Vol. 21, No. 1, pp. 64-69. (SCI, EI)
  20. Tseng S.C. and Liao, C.L, 2003, A Study of Processing Conditions on the Properties of Diffraction Optical Elements by Injection/Compression Molding Process, International Polymer Processing, Vol. 18, No. 2, pp. 194-198. (SCI, EI)
  21. Lin, C.H., Chen Y., Shew B.Y., Tseng S.C, 1999, LIGA Spinnerets for Microfibers, Chemical Information Monthly, Vol. 13, No. 11, pp. 40-45.
  22. Lin, C.H., Chen Y., Shew B.Y., Tseng S.C., Wei, W.C, 1999, X-ray LIGA to Manufacture Spinnerets for Microfibers, Chemical Information Monthly, Vol. 13, No. 11, pp. 40-45.
  23. Shew B.Y., Cheng Y., Lin C.H. Ma W.P., Hwang G.J., Tseng S.C., Kuo C.L., Chang G.L., Lee D.S., 1999, Manufacturing process for LIGA Spinnerets, Sensors and Materials, Vol. 11, No. 6, pp. 329-337. (SCI, EI)
  24. Tseng, S.C. and T.A. Osswald, 1994, Prediction of Shrinkage and Warpage of Fiber Reinforced Composite Parts, J. Rein. Plas. Comp., Vol. 13, No. 8, pp. 698-721.
  25. Tseng, S.C. and T.A. Osswald, 1994, Predicting Shrinkage and Warpage of Fiber Reinforced Composite Parts, Polym. Comp. Journal, Vol. 15, No. 4, pp. 270-277.
  26. Osswald, T.A., E.M. Sun, and Tseng, S.C., 1994, Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Molded SMC Parts, Polym. & Polym. Comp., Vol. 2, No. 3, pp. 187-198.
  27. Tseng, S.C. and T.A. Osswald, 1993, Predicting Shrinkage and Warpage of Thin Compression Molded Fiber Reinforced Thermoset Parts, SAMPE Journal, Vol. 24, No. 4, pp. 40-48.
二、研討會論文
  1. 曾世昌, 2018, Sensitivity of Arrayed Flexible Chloride Sensor with the XBee Wireless Sensing System, 2018 International Electron Devices (2018 IEDMS) & Materials Symposium,, 2018/11/14-16, 基隆市.
  2. 曾世昌, 2018, Application of Conformal Cooling to Reduce Cooling Time and Warpage of a U-Shaped Plate, 34th International Conference of Polymer Processing Society, 2018/05/21-25, 台北市.
  3. 曾世昌, 2018, LIGA Nanofabrication of Sub-Wavelength Optics, 4th IEEE International Conference on Applied System Innovation 2018, 2018/04/13-17, Tokyo.
  4. Shi-Chang Tseng and Chun-Ting Lu, 2009, A Study on Liga Nanofabrication For Sub-Wavelength Optics, ANTEC-2009 Conf., 2009/06/22-26, Chicago.
  5. Yu-Te Liao, Shi-Chang Tseng , Meng-Chih Chen, Chao-Tsai Huang and Yuan-Jung Chang, 2009, A Study of Thermally And Flow Induced Residual Stresses in Injection Molding, ANTEC-2009 Conf., 2009/06/22-26, Chicago.
  6. Shi-Chang Tseng, Chien- Yue Chen, Chia-Hung Yeh and Tsung- Yen Hsieh, 2009, A Study of Liquid Molding Process on the manufacture of Novel Micro-Prism Array Optical Films, APCOM-2009 Conf., 2009/02/11-13, Taipei.
  7. Wen-Chia Hsiao and Shi-Chang Tseng, 2008, A Study of Manufacture of Micro Molds and Injection Molding Technology for Producing Precision Micro Optical Benches, 2008 Cross-Strait Conf., 2008/12/02-04, Beijin.
  8. Chun-Ting Lu , Bryan Shew and Shi-Chang Tseng, 2008, A Study on LIGA Nanofabrication for Sub-wavelength Optical Structure, CSME-2008 Conf., 2008/11/11-12, Yuenlin.
  9. Shi-Chang Tseng and Yu-Te Liao, 2008, The Effects of High Shear Rates on Ultra Thin Injection Molding, CSME-2008 Conf., 2008/11/11-12, Yuenlin.
  10. 曾世昌, 2008, Shi-Chang Tseng, Chien- Yue Chen, Chia-Hung Yeh and Yan- Ching Lin, CSME-2008 Conf., 2008/11/11-12, Yuenlin.
  11. Shi-Chang Tseng and Chui-Ting Shi, 2008, Manufacture of Spinnerets for Synthetic Micro-fibers by LIGA and Micro Injection Molding, 7th Annual International Polymer Colloquium, 2008/05/09, Madison.
  12. Chao-Tsai Huang, Meng-Chih Chen, Wen-Li Yang, Huang-Yi Chang, And Shi-Chang Tseng, 2008, Optical Property Investigation In Sequential Multi-Component Molding, ANTEC-2008 Conf., 2008/05/05-09, Milwukee.
  13. Kai-Jie Chang and Shi-Chang Tseng, 2007, Study of Multi-Component Molding, CSME-2007 Conf., 2007/11/11, JunYuen.
  14. Shi-Chang Tseng and Mong-Yu Chiang, 2007, Implementation of Micro Hot Runner System in Thermoplastic Injection Molding Multiple Micro Components, ACMT-2007 Conf., 2007/10/26, Dusseldorf.
  15. Shi-Chang Tseng and Kai-Jie Chang, 2007, A Study of Warpage and Its Behavior in Sequential Overmolding Biodegradable Polymer PLA, Bio-Plastics 2007 Conf., 2007/09/19-21, Montreal.
  16. S.C. Tseng , Yi-Cheng Chen and Wen-Chiang Hsiao, 2007, A Study of Micro Molding for Optical Benches with Three Different Levels of Micro Features, ICCE-15 Conf., 2007/07/15-21, Haiko.
  17. S.C. Tseng , Y.C. Chen and B.Y. Shew, 2007, A Study of Integration of LIGA and MEDM Technology on the Micro Injection Molding of Ink Jet Printers, ANTEC2007 Conference, 2007/05/06-10, Cincinnati.
  18. Chao-Tsai Huang, Meng-Chih Chen, Wen-Li Yang, Kai-Jie Chang, and Shi-Chang Tseng, 2007, Investigation on Warpage and Its Behavior in Sequential Overmolding, ANTEC-2007 conf., 2007/05/06-10, Cincinnati.
  19. Tseng, S.C. and Lee, C.H, 2006, Product Geometrical Effect and Material Selection in Multi- Component Molding Development, ACMT Annual Meeting, 2006/08/23, Tainan.
  20. Shi-Chang, Tseng and Wen-Chiang Hsiao, 2006, A Study to Micro Mold Manufacture and Micro Molding for Optical Benches with Three Different Levels of Micro Features, PPS-22 Conf., 2006/07/02-06, Yamagata.
  21. Shi-Chang Tseng and Meng-Yu Jiang, 2006, Implementation of Micro Hot Runner System in Thermoplastic Injection Molding Multiple Micro Components, PPS-22 Conf., 2006/07/02-06, Yamagata.
  22. 65. Chao-Tsai Huang, Ching-Hui Yeh, Venny Yang, and Shi-Chang Tseng, 2006, Product Geometrical Effect and Material Selection in Multi- Component Molding Development, ANTEC 2006 Conf., 2006/05/07-11, Charlotte, NC.
  23. Wen-Chia Hsiao and Shi-Chang Tseng, 2005, A Study of Manufacture of Micro Molds and Injection Molding Technology for Producing Precision Micro Optical Benches, Workshop for Optotronics, 2005/10/24, Huiwei.
  24. Hsieh Ye-Chih and Tseng Shi-Chang, 2005, Fabrication of Stampers by UV Resin Dispensing & Curing Method and the Vario-Thermal Mold System for Injection Molding Light Guide Plates, Workshop for Optotronics, 2005/10/24, Huiwei.
  25. Cheng-Sheyn Lin and Shi-Chang Tseng, 2005, A Study of Micro Injection Molding Through-Hole Array by Integration of UV-LIGA and Micro-EDM Technology, Workshop for Optotronics, 2005/10/24, Huiwei.
  26. Yu-Ching Hsieh, Shi-Chang Tseng and Born-Yuen Shew, 2005, Effects of a Vario-Thermal Mold System on the Degree of Replication of Micro Injection Molded Wave Guides, PPS-21 Conf., 2005/06/19-22, Lebitz.
  27. Chia-Hsin Chang, Shi-Chang Tseng and Cheng-Ping Chiu, 2005, A Study of In-Mold Punching Design for Injection Molding High Density Micro Through-Hole Arrays, PPS-21 Conference, 2005/06/19-22, Lebitz.
  28. Zheng-Guan. Lin, Shi-Chang Tseng, Allen Peng and C.T. Huang, 2005, A Study of Micro Injection Molding Optical Fiber Ferrules, ANTEC2005 Conference, 2005/05/01-07, Boston.
  29. Jen-Nan Tseng, Shi-Chang Tseng1, Allen Peng and C.T. Huang, 2005, A Study of 3D Fiber Orientation of Thermoplastic Injection Molded Plates with Ribs, ANTEC 2005 Conf., 2005/05/01-07, Boston.
  30. Tseng, S.C. and Shieh, Y.C, 2004, Effects of the Vario-thermal Molding System on the Degree of Replication and Quality in Micro Injection Molding Precise Optical Wave Guides, ACMT Annual Meeting, 2004/10/21-24, Taipei.
  31. Tseng, S.C. and Lin, C.S, 2004, An Integration of UV-LIGA and MEDM to Manufacture Micro Mold for Nozzle Plates of Ink Jet Printers and Injection Molding Process Optimization, ACMT Annual Meeting, 2004/10/21-24, Taipei.
  32. Tseng, S.C. and Lee, C.H, 2004, Effects of Molding Conditions on the Degree of Replication and Quality in Hot Embossing Precise Micro Optical Wave Guides, ACMT Annual Meeting, 2004/10/21-24, Taipei.
  33. Tseng, S.C. and Chiang, M.Y, 2004, A Study of Micro Injection Molding Fiber Spinnerets, ACMT Annual Meeting, 2004/10/21-24, Taipei.
  34. Tseng, S.C. and Chang, C.S, 2004, Effects of In-Mold Punching Conditions on the Quality of Injection Molding Through Hole Array, ACMT Annual Meeting, 2004/10/21-24, Taipei.
  35. S.C. Tseng, Y.C. Chen, B.Y. Shew and C.P. Chiu, 2004, Application of LIGA and MEDM Technology to the Manufacture of Micro Mold for Injection Molding of Ink Jet Printers Nozzle Plates, PPS-20 Conf, 2004/06/21-25, Akron,Ohio.
  36. Zheng-Guan. Lin, Shi-Chang Tseng, James Wang and Yi-Chung Su, 2004, A Novel Guiding Mechanism of Micro Core Pins in the Micro Injection Molding of High-Aspect-Ratio Optical Fiber Ferrules, PPS-20 Conf, 2004/06/20-24, Akron,Ohio.
  37. Zheng-Guan. Lin, Shi-Chang Tseng, James Wang and Yi-Chung Su, 2004, A Study of Micro Injection Molding for High-Aspect-Ratio Optical Fiber Ferrules, Numiform2004 Conf, 2004/06/13-17, Columbus,Ohio.
  38. Chen Y.C., B.Y. Shew and S.C. Tseng, 2004, A New Approach to Fabricate Nozzle Plates by Integration of LIGA and MEDM Technology, DTIP 2004 Conf, 2004/05/12-14, Montreaux.
  39. Chen, Y.C., B.Y. Shew, S.C. Tseng and C.L. Kuo, 2003, A New Approach to Fabricate Nozzle Plates by Integration of LIGA and MEDM Technology, CSME-20 Conf, 2003/11/22, Teipei.
  40. Chen Y.C., B.Y. Shew, S.C. Tseng and C.L. Kuo, 2003, A New Approach to Fabricate Nozzle Plates by Integration of LIGA and MEDM Technology, Taiwan 7th Nano & Mems Conf., 2003/07/18-21, Taipei, pp. 253-256.
  41. Max Yen and Tseng, Shi-Chang, 2002, Combined Image and Finite Element Analyses on the Stress Concentration of Impacted Chopped Fiber Composites, ISEM 2 Conference, 2002/12/25-27, Taipei.
  42. Shieh, Y.C., Liao Y.Y and Tseng, S.C, 2002, A Study of Plastic Micro Injection Molding Technique for Optical Fiber Connectors, 2002 Std. Coop. Conf, 2002/10/17-20, Touilu.
  43. Huang, W.S., Lin C.S., Tseng, S.C., Lie, C.H., Lin, S.F. and Liao, C.L, 2002, The effects of processing parameters on the injection molded aspheric Lens, 2002 Ind.-Academy. Coop. Conf, 2002/10/17-20, Touilu.
  44. Shih-Jern Chen and Shi-Chang Tseng, 2002, Some New Finding of Important Factors to Reduce the Shrinkage of Ceramic Injection/Compression Molded Components, APEA 2002 Conference, 2002/10/15-19, Sydney.
  45. Tseng, Shi-Chang and Liao C.L, 2002, A Study on the Performance of Diffraction Optical Elements by Nano Injection/Compression Molding Process, Nano 2002 Conference, 2002/08/01, Washington.
  46. Tseng, Shi-Chang, Lee-Lon Chen and Chen-Ping Chiu, 2002, A New Design Method to Improve Flow Uniformity of Gates in Micro-Injection Molding, PPS-18 Conference, 2002/06/18-21, Porto.
  47. Tseng Shi-Chang and Liao C.L, 2002, A Study of Processing Condition on the Properties of Diffraction Optical Elements by Injection/Compression Molding Process, PPS-18 Conference, 2002/06/18-21, Porto.
  48. Wu, T.M., Wang, I.M. and Tseng, S.C, 2001, A Study of Circulating Water Flow Impact on the Ball Strainers, Power 2001 Conference..
  49. Tseng Shi-Chang and Shieh, S.L, 2001, A Study of crystallization and shrinkage of PET Injection Molded Components, CSME Annual Conference sponsored by CSME.
  50. Tseng Shi-Chang and Chen, Y.C, 2001, A Study on Sink Marks and Warpage of Plastic Injection Compression Molding Products with Plate-Ribs, CSME Annual Conference sponsored by CSME..
  51. T.M. Wu, I.M. Wang, S.C. Tseng, 2001, A Study of Circulating Water Flow Impact on the Ball Strainers, 22nd Symposium on Electrical Power Engineering..
  52. Tseng, Shi-Chang and Cheng, Mao-Ping, 2000, An Investigation of Mechanical Properties and Three-Dimensional Fiber Orientation of Transfer Molded Short Fiber Reinforced Composites, ICCE/7 Conference.
  53. Tseng Shi-Chang and Liao, Cheun-Lun, 2000, A Study of the Effects of injection Compression Molding Conditions on the optical qualities of Laser Diffraction Lens, CSME Annual Conference sponsored by CSME.
  54. Shi Chang Tseng and Mao-Chung Hsieh, 2000, Investigation of Residual Stress,Shrinkage and Sink Marks in Compression Molded Thermoset Composites, ICCE/7 Conference.
  55. S.C. Tseng, C.T. Shi , C.L. Kuo and Y. Cheng, 2000, A New Development on Fabrication of Fiber Spinnerets by the LIGA Technology, PPS-16 Conference..
  56. Cheng Ping Chiu, Hong Yu Hsiao, Mao-Chung Hsieh and Shi Chang Tseng, 2000, Numerical and Experimental Study of High Reynolds Number Flow through an Extrusion Die, ICCE/7 Conference.
  57. C.P. Chiu, L.N. Tan and S.C. Tseng, 2000, Non-isothermal Transient Simulation of the Reaction Injection Mold Filling Process for Thin Dies, PPS-16 Conference..
  58. Y. Cheng, B.Y. Shew, C.H. Lin, T.P., Hung C.-L., Kuo, S.-C. Tseng, D.-S. Lee, and G.-L. Chang, 1999, LIGA SPINNERETS FOR MICROFIBERS, Proceeding of Transducer-99 Conference.
  59. Tseng, S.C., Shi C.T., Kuo C.L., and Cheng Y., 1999, An New Pattern of Fabrication of Fiber Spinnerets by the LIGA Technology, MEMS Conference sponsored by the International Society for Optical Engineering (SPIE).
  60. B.Y. Shew, Y. Cheng, C.H. Lin, W.P. Ma, G.J. Hwang, S.-C. Tseng, C.-L. Kuo, G.-L. Chang, D.-S. Lee, 1999, LIGA Spinnerets for Microfibers, 16th CSME Annual Conference sponsored by CSME..
  61. B.Y. Shew, Y. Cheng, C.H. Lin, W.P. Ma, G.J. Hwang, S.-C. Tseng, C.-L. Kuo, G.-L. Chang, D.-S. Lee, 1999, LIGA Spinnerets For Microfibers, SRRC fith User’s Meeting &Workshop on the Application of Synchrotron Radiation.
  62. Y. Cheng, B.-Y. Shew, C.-H. Lin, T.-P. Hung G.-J. Hwang, C.-L. Kuo, S.-C. Tseng, D.-S. Lee, G.-L. Chang, 1998, LIGA SPINNERETS FOR MICROFIBER, 1st Harmst 98 Conf..
  63. Y. Cheng, B.Y. Shew, C.H. Lin, C.K. Chang, W.W. Chang, G.J. Hwang, C.-L. Kuo, S.-C. Tseng, 1998, Micromachined Spinnerets for Microfibers, 4th World Mirco-machine Summit..
  64. Tseng, S.C., Shi C.T, Kuo C.L., and Cheng Y., 1998, An Study of Micro-Injection Molding Technique and Its Applications on Manufacturing Fiber Spinnerets, CSME Annual Conference sponsored by CSME.
  65. Tseng, S.C., Shi C.T, Kuo C.L., and Cheng Y., 1998, An Investigation of Micro-Injection Molding on the Fabrication of Fiber Spinnerets, PPS-14 Conference sponsored by ASME Polymer Processing Society.
  66. Tseng, S.C., Hwang, S.F. and Cheng, M.B, 1997, A Study of Natural Frequency Analysis and Simulation of Short Fiber Reinforced Thermoset Composites, 15th CSME Annual Conference sponsored by CSME..
  67. Tseng, S.C. and Shi C.T, 1997, An Study of Micro-Injection Molding and Fabrication of Fiber Spinnerets, Taiwanese MEMS Annual Conference sponsored by Chinese MEMS Society.
  68. Tseng, S.C., 1997, Investigation 2of Residual Stresses, Shrinkage and Warpage in Transfer Molded Microelectronic Packages.
  69. 曾世昌, 鄭茂彬, 1996, 熱固型複材轉移成形三維纖維配向與機械行為實驗研究, 中國機械工程學會第13屆研討會(論文).
  70. 曾世昌, 黃順發, 陳獻文, 1996, 短纖強化熱固型複材振動模態分析與實驗研究, 中國機械工程學會第13屆研討會(論文).
  71. 邱澄彬, 譚樂年, 曾世昌, 1996, 反應式射出成型對薄板模具充填過程之非恆溫暫態模擬研究, 中國機械工程學會第13屆研討會(論文).
  72. Tseng, S.C. and Cheng, M.B, 1996, A Study of 3D Fiber orientation and Mechanical Behavior in Transfer Molding of Thermoset Fiber Reinforced Composites, 13th CSME Annual Conference sponsored by CSME..
  73. Chiu, C.P., Tan L.N. and Tseng, S.C, 1996, Numerical Simulation of Non-isothermal and Transient Mold Filling during Reaction Injection Thin Parts, 13th CSME Annual Conference sponsored by CSME..
  74. 曾世昌, 鄭博文, 林育星, 1995, 應用田口方法於塑膠射出成型製程分析, 中華民國第1屆可靠度與維護度研討會(論文).
  75. 曾世昌, 邱澄彬, 蔡建立, 1995, 熱固型複材熱壓成形品收縮凹陷及殘留應力研究, 中國機械工程學會第12屆研討會(論文).
  76. 曾世昌, 林育星, 1995, 塑膠模流特性對射出成型品流動長度及殘留應力影響之研究, 中國機械工程學會第12屆研討會(論文).
  77. 邱澄彬, 曾世昌, 蕭宏昱, 1995, 反應式高分子擠壓成型模流模擬與實驗研究, 中國機械工程學會第12屆研討會(論文).
  78. Tseng, S.C., Chiu, C.P., and Tsai, C.L, 1995, A Study of Sink Marks and Residual Stresses of Thermoset Reinforced Composite Parts, 12th CSME Annual Conference sponsored by CSME..
  79. Tseng, S.C., Cheng, B.W. and Lin, Y. S, 1995, Application of Taguchi’s Design of Experiments in Process Analyses of Plastic Injection Molding, The first Chinese Reliability and Maintenance Conference..
  80. Tseng, S.C. and Lin Y.S, 1995, A Study of Mold Flow Length and Residual Stress of Plastic Injection Molding, 12th CSME Annual Conference sponsored by CSME..
  81. Tseng, S.C., 1995, Modeling and Simulation of The Thermomechanical Behavior of Fiber Reinforced Thick-Section Structural Components, Transaction of 1995 ASME Intern. Mech. Eng. Cong. & Expo.
  82. Tseng, S.C., 1995, Integrated Prediction of Shrinkage and Warpage of Fiber Reinforced Fiber Reinforced Thermoset Composites, Proceeding of The Third Intern. Conf. on Die and Mold Technology.
  83. Chiu, C.P., Tseng, S.C. and Shiao, 1995, Numerical Simulation and Flow Visualization Experiment of Reaction Injection Molding Process, 12th CSME Annual Conference sponsored by CSME..
  84. Osswald T.A., E.M. Sun, and Tseng, S.C., 1994, Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Molded SMC Parts, SPI 49th Conf. Proc.
  85. Osswald T.A., E.M. Sun, and S.C. Tseng, 1994, Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Molded SMC Parts, SPE,ANTEC Conf.
  86. Tseng, S.C. and T.A. Osswald, 1993, Prediction of Shrinkage and Warpage of Fiber Reinforced Composite Parts, SPI 48th Conf. Proc.
  87. Tseng, S.C. and C.P. Chiu, 1993, The Effects of Mold Temperatures on the Residual Stresses of ABS Terpolymer during Injection Molding, Proceeding of US-Taiwan Symposium on Advanced Manufacturing Processes.
  88. Tseng, S.C. andT.A. Osswald, 1992, thermomechanical Behavior of Fiber Reinforced Composite Parts, Advances in Manufacturing Systems.
  89. Tseng, S.C. and T.A. Osswald, 1992, Predicting Shrinkage and Warpage of Fiber Reinforced Composite Parts, SPE,ANTEC Conf.
  90. Tseng, S.C. and T.A. Osswald, 1992, Modeling and Simulation of the Thermomechanical Behavior of Fiber Reinforced Composite Parts, Polym. Proc. Soc. ,8th Conf..
  91. Tseng, S.C. and T.A. Osswald, 1991, Modeling and Simulation of the Thermomechanical Behavior of Fiber Reinforced composite Parts, Heat and Mass Transfer in Solidification Processing,ASME.
  92. Tseng, S.C. and T.A. Osswald, 1991, A Study of the Thermomechanical Behavior of Fiber Reinforced Composite Parts, Polym. Proc. Soc. ,7th Conf..
  93. Tseng, S.C. and C.P. Chih, 1989, The Effects of Mold Temperatures on the Residual Stresses of ABS Terpolymer in Injection Molding, 6th Nat. Conf. On Mech. Eng. CSME.
三、技術報告
  1. 曾世昌, 2004, 結合光硬化成形微結構的製造方法, 專利編號201076.
  2. 曾世昌, 2004, 無縫合線之射出成型方法及其裝置, 申請號 2004100501726, 國外專利.
  3. 曾世昌, 2004, 無縫合線之射出成型方法及其裝置, 申請號 093106784.
  4. 曾世昌, 2003, 塑膠射出擠製模, 專利編號211493.
  5. 曾世昌, 2003, 結合光硬化成形微結構的製造方法, 申請號 02130360.9, 國外專利.
  6. 曾世昌, 2003, 結合光硬化成形微結構的製造方法, 國外專利.
  7. 曾世昌, 2003, 具有自動分離澆口設計之微熱澆道系統, 專利編號 1229030.
  8. 曾世昌, 2002, 精密塑膠陣列式微穿孔薄片之製造方法, 申請號91133345.
  9. 曾世昌, 2000, 模造法紡口製程, 專利編號117450.
四、其他論著
  1. Osswald, T.A. and Tseng, S.C., 1994, Orientation and Warpage Prediction in Polymer Processing, a chapter in Innovation in Polymer Processing(edited by J. F. Stevenson), Hanser Publ.
  2. Osswald, T.A. and Tseng, S.C., 1994, Compression Molding, a chapter in Flow and Rheology in Polymer Composites Manufacturing. edited by S. G. Advani, Elsevier Publ.
  3. Tseng, S.C, 1993, Simulation of the Thermomechanical Behavior of Fiber Reinforced Composites, Ph. D. Dissertation in Dept. of Mech. Eng. at the University of Wisconsin-Madison, Madison,USA..
  4. Tseng, S.C., 1989, The Effects of Mold Temperatures on the Residual Stresses and Shrinkage of ABS Terpolymer in Injection Molding, Master Thesis in Dept. of Mech. Eng. at National Cheng-Kung University, Tainan,Taiwan,R.O.C.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 

SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Registerlogon登入 Login