112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢
  1. 按【查詢】按鈕：請先選擇學院→系所→教師，輸入起迄年或不輸入起迄年，再點選【查詢】即完成。
  2. 按【進階查詢】按鈕：採用組合查詢的方式。
  3. 按【匯出Word檔】按鈕：匯出教師【個人】著作資料。
搜尋條件：著作類別->全部著作 | 學院->College Of Engineering | 系所->Department of Mechanical Engineering | 教師姓名->Lo Sy-Wei
      
         西元年   至    
羅斯維老師的論文著述

一、學術期刊論文

  1. S.W. Lo, Y.H. Guo, L.C. Hsu, S.J. Chang, Y.T. Wu, 2017, Aerostatic Thrust Bearing Combining Silicone Restrictor with Flexible Disk under Circumferential Support for High Static Stiffness, STLE Tribology Transactions, Vol.60, No.1, pp.31-38. (SCI, EI)
  2. Lo, S.W., Yu, C.H., 2015, Polymer Aerostatic Thrust Bearing under Circular Support for High Static Stiffness, World Academy of Science, Engineering and Technology, International Science Index 106, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol.9, No.10, pp.1458-1461. (其他)(結合電磁力與薄膜/泡棉/高分子體之主動補償式氣靜壓軸, MOST102- 2221- E- 224- 014- MY3)
  3. S. W. Lo, S.-H. Lu, Y. H. Guo, L.-C. Hsu, 2014, Numerical study on the characteristics of novel aerostatic thrust bearings possessing elastomer capillalry restrictor and bearing surface, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, Vol. 8, No. 11, pp. 1775-1778. (其他)(NSC 102- 2221-E- 224- 014- MY3)
  4. Sy-Wei Lo, Tzu-Chun Yang, Heng-Sheng Lin, 2013, The lubricity of oil-in-water emulsion in cold strip rolling process under mixed lubrication, Tribology International, Vol.66, No.4, pp.125-133. (SCI, EI)(油/水乳化液潤滑之鈑金滾軋製程分析, NSC 99-2221-E-224-015-MY3)
  5. 羅斯維, 2012, A Rapid Method of Setting Inlet/outlet Interferences for Sheet Metal Roll Straighteners, Journal of Technology, Vol.27, No.2, pp.65-71. (EI)
  6. Lo, S. W., Yang, T. C., Cian, Y. A., Huang, K. C., 2010, A Model for Lubrication by Oil-in-Water Emulsions, ASME Trans., Journal of Tribology, Vol.132, No.1, pp.011801. (SCI, EI)(乳化液中油滴潤滑機制的數值探討與理論建立, NSC95-2212-E-224-078-MY3)
  7. S.W. Lo, T.C. Yang, Z.M. Shih, S.C. Lin, 2009, Effects of Surface Roughening on Asperity Flattening, Tribology Letters, Vol.35, No.1, pp.67. (SCI, EI)(應用即時觀測技術建立金屬表面峰粗糙化及接觸應變之新模式, NSC97-2221-E-002-258, NSC95-2212-E-224-078-MY3)
  8. W.K. Guo, S.W. Lo, S.C. Tseng, 2009, Friction and Wear of Nano-Carbon-Nanotube/ Polystyrene Composites under Water Lubrication, Journal of Advanced Engineering, Vol.1, No.1.
  9. S.W. Lo, K.C. Huang, M.C. Zhou, 2009, CFD Study on Oil-in-Water Emulsions, STLE Tribology Transactions, Vol.52, No.1, pp.66-72. (SCI, EI)(乳化液中油滴潤滑機制的數值探討與理論建立, NSC95-2212-E-224-078-MY3)
  10. S.W. Lo, S.F. Tsai, 2008, FEA Study on Electromagnetic Forming of Hydrodynamic Herringbone-Groove Bearing for High Speed Miniature Motors, Journal of the Chinese Society of Mechanical Engineers, Vol.29, No.2, pp.135-147. (其他)
  11. S.W. Lo, T.H. Chen, L.W. Lo, J.J. Chiu, 2008, Design and Construction of A Hemodynamic Simulator for Studying Vascular Endothelial Responses to Hemodynamic Forces, Biomedical Engineering-Applications, Basis and Communications, Vol.20, No.2, pp.95-105. (EI)(NSC94-2212-E-224-002)
  12. Yang, T. S. and Lo, S. W., 2006, Contact Simulation for Predicting Surface Topography in Metal Forming, Tribology Letter, Vol.23, No.2, pp.121-129. (SCI, EI)(NSC93-2212-E-150-031)
  13. Lo, S. W. and Yang, T. S., 2006, A Microwedge Model of Sliding Contact in Boundary/Mixed Lubrication, Wear, Vol.261, pp.1163-1173. (SCI, EI)(NSC91-2212-E-224-005, NSC92-2212-E-150-039)
  14. Yang, T. S. and Lo, S. W., 2004, A Finite Element Analysis of Full Film Lubricated Metal Forming Process, Tribology International, Vol. 37, pp. 591-598. (SCI, EI)
  15. Lo, S. W., Zhou, B. Q., Fang, C. F., and Lu, Y. S., 2004, In Situ Observation of Microwedge Effect on Liquid Lubication, ASME Trans.,Jouranl of Tribology, Vol. 126, No. 4, pp. 690-696. (SCI, EI)
  16. Lo, S. W. and Yang, T. C., 2004, Closed-Loop Control of the Blank Holding Force in Sheet Metal Forming with a New Embedded-Type Displacement Sensor, International Journal of Advanced Manufacturing Technology, Vol. 24, No. 7, pp. 553-559. (SCI)
  17. Lo, S. W. and Yang, T. S., 2003, A New Mechanism of Asperity Flattening in Sliding Contact-- The Role of Tool Elastic Microwedge, ASME Trans.,Jouranl of Tribology, Vol. 125, No. 4, pp. 713-719. (SCI, EI)
  18. Lo, S. W. and Tsai, S. D., 2002, Real-Time Observation of the Evolution of Contact Area under Boundary Lubrication in Sliding Contact, ASME Trans.,Journal of Tribology, Vol. 124, No. 2, pp. 229-238. (SCI, EI)
  19. Lo, S. W. and Lu, Y. H., 2002, Wire Drawing Dies with Prescribed Variations of Strain Rate, Journal of Materials Processing Technology, Vol. 123, pp. 212-218. (SCI, EI)
  20. Lu, Y. H., Li, C. L., and Lo, S. W., 2001, A Study of the Optimum Blank for Square Cup Drawing--- Using the Stream Line Method, Journal of Materials Processing Technology, Vol. 110, pp. 146-151. (SCI, EI)
  21. Lo, S. W. and Yang, T. S., 2001, Determining the Pressure Dependence of Lubricant Viscosity by Roughness Measurement of Rolled Strip, STLE,Tribology Trans, Vol. 44, No. 1, pp. 118-124. (SCI)
  22. 羅斯維, 2001, 禪與生活規劃, 第四屆禪與管理學術研討會(論文集), pp. 113-118.
  23. Lu, Y. H. and Lo, S. W., 1999, Optimally-Controlled Strain-Rate Dies for Plane-Strain Extrusion, Journal of Materials Processing Technology, Vol. 86/1-3, No. 1-3, pp. 56-66. (SCI, EI)
  24. Lu, Y. H. and Lo, S. W., 1999, An Advanced Model of Designing Controlled Strain Rate Dies for Axisymmetric Extrusion, ASM,Journal of Materials Engineering and Performance, Vol. 8, No. 1, pp. 51-60. (EI)
  25. Lo, S. W. and Wilson, W. R. D., 1999, A Theoretical Model of Micro-Pool Lubrication in Metal Forming, ASME Trans.,Journal of Tribology, Vol. 121, No. 4, pp. 731-738. (SCI, EI)
  26. Lo, S. W. and Lu, R. F., 1999, The Influence of Bulk Plastic Flow on Lubricant Permeation from Micro Oil Pits in Metal Forming, STLE,Tribology Trans., Vol. 42, No. 3, pp. 647-653. (SCI)
  27. Lo, S. W. and Jeng, G. M., 1999, Monitoring the Displacement of a Blank in a Deep Drawing Process by Using a New Embedded-Type Sensor, International Journal of Advanced Manufacturing Technology, Vol. 15, pp. 815-821. (SCI)
  28. Lo, S. W. and Horng, T. C., 1999, Surface Roughening and Contact Behavior in Forming of Aluminum Sheet, ASME Trans.,Journal of Tribology, Vol. 121, No. 2, pp. 224-233. (SCI, EI)
  29. Lo, S. W. and Horng, T. C., 1999, Lubricant Permeation from Micro Oil Pits under Intimate Contact Condition, ASME Trans.,Journal of Tribology, Vol. 121, No. 4, pp. 633-638. (SCI, EI)
  30. Lo, S. W. and Lee, J. Y., 1998, Optimum Blank Shapes for Prismatic Cup Drawing-- Consideration of Friction and Material Anisotropy, ASME Trans.,Journal of Manufacturing Science and Engineering, Vol. 120, No. 2, pp. 306-315. (SCI, EI)
  31. Lo, S. W. and Horng, T. C., 1998, An Investigation of New Tribological Variables in Friction Modeling of Bulk Metal Forming, ASME Trans.,Journal of Tribology, Vol. 120, No. 3., pp. 528-535. (SCI, EI)
  32. Lo, S. W. and Chung, K. J., 1998, The Optimum Condition of Manufacturing a Smooth Engineered Surface Using Internal-Ironing Process, STLE,Tribology Trans., Vol. 41, No. 4, pp. 563-571. (SCI)
  33. Lo, S. W.,Wu, Y. H., Yue, T. D., and Xue, F. Y., 1996, On the Proprieties of Springback Theories for Commercial and Experimental Stamping Products, Journal of the Chinese Society of Mechanical Engineers, Vol. 17, No. 4, pp. 397-404.
  34. Lo, S. W., 1996, An Efficient Method of Designing Controlled Strain Rate Dies for Extrusions, Journal of the Chinese Institute of Engineers, Vol. 19, No. 5, pp. 1-9.
  35. Lo, S. W., 1996, Preliminary Die Design for Extrusion of Compressible Porous Materials, The Chinese Journal of Mechanics, Vol. 12, No. 3, pp. 353-362.
  36. Lo, S. W., 1995, Die-Workpiece Interfacial Behaviors in Axisymmetric Forging Processes with Flat Dies, STLE,Tribology Trans., Vol. 38, No. 3, pp. 663-671. (SCI)
  37. Lo, S. W., 1994, A Study on Flow Phenomena in Mixed Lubrication Regime by Porous Medium Model, ASME Trans.,Journal of Tribology, Vol. 116, No. 3, pp. 640-647. (SCI, EI)
  38. Lo, S. W., Hsu, T. C., and Wilson, W. R. D., 1993, An Analysis of the Hemisphere Punch Hydroforming Processes, Journal of Materials Processing Technology, Vol. 37, pp. 225-239. (SCI, EI)
  39. Lo, S. W., 1992, On the Effect of Roughness Orientation-A Mapping and Double Scale Analysis of Flow Factors, ASME Trans.,Journal of Tribology, Vol. 114, No. 4, pp. 747-754. (SCI, EI)
二、研討會論文
  1. 林友義, 羅斯維, 任志強, 毛祚飛, 2017, 新型自調阻抗之高分子雙毛細管式油壓節流器, 第二十屆全國機構與機器設計學術研討會, 2017/11/17-18, 中華民國機構與機器原理學會, 彰化縣，國立彰化師範大學, C2-2. (利用磁流變高分子體進行主/被動氣靜壓軸承研發及在氣浮導軌之應用, MOST105-2221-E-224-016-MY3)
  2. 阮彥瑜, 羅斯維, 任志強, 李昀叡, 2017, 具迴授功能的滑閥型提動節流器之研究, 第三屆台灣磨潤科技研討會, 2017/10/06-08, 崑山科技大學機械系, 台南，崑山科技大學, CTTT-002. (利用磁流變高分子體進行主/被動氣靜壓軸承研發及在氣浮導軌之應用, MOST105-2221-E-224-016-MY3)
  3. Sy-Wei Lo, Mao-Hong Lin, Guan-Lun Luo, Hong-Chang Jhan, Tsuo-Fei Mao, 2016, Improve the Load Capacity and Reduce the Air Consumption of Aerostatic Thrust Bearings by Using Polymer Restrictor and Bearing Body, Improve the load capacity and reduce the air consumption of aerostatic thrust bearings by using polymer restrictor and bearing body, 2016/11/02-04, 台灣磨潤科技學會, Taipei, CETATS 022. (利用磁流變高分子體進行主/被動氣靜壓軸承研發及在氣浮導軌之應用, MOST 105-2221-E-224-016-MY3)
  4. Sy-Wei Lo, Chi-Heng Yu, 2015, Polymer Aerostatic Thrust Bearing under Circular Support for High Static Stiffness, ICAME 2015 : 17th International Conference on Automation and Mechatronics Engineering, 2015/10/26-27, World academy of science, engineering and technology, Barcelona, Vol.9, No.10. (結合電磁力與薄膜/泡棉/高分子體之主動補償式氣靜壓軸, NSC102-2221-E-224-014-MY3)
  5. 羅斯維, 2014, Aerostatic Thrust Bearing Combining Silicone Restrictor with Flexible Metal Frame, 2014 International Conference on Engineering Tribology Technology, 2014/11/21-23, 台灣磨潤科技學會, 日月潭，南投縣, CETTS003, p. 118. (結合電磁力與薄膜/泡棉/高分子體之主動補償式氣靜壓軸承, NSC102-2221-E-224-014-MY3)
  6. 羅斯維, 2014, Numerical Study On The Static Characteristics Of Novel Aerostatic Thrust Bearings Possessing Elastomer Capillary Restrictor And Bearing Surface, ICTIE 2014 : XI International Conference on Tribology and Interface Engineering, 2014/11/13-14, WASET(World Academy of Science, Engineering and Technology, Venice, Vol. 8, no.11, paper. (結合電磁力與薄膜/泡棉/高分子體之主動補償式氣靜壓軸承, NSC102-2221-E-224-014-MY3)
  7. 吳聖泰, 羅斯維, 2013, 四球及線性往復式測試機制對潤滑液摩擦及磨耗測試結果之影響, 2013第一屆台灣磨潤科技研討會, 2013/10/05-06, 台灣磨潤科技學會, 雲林縣古坑鄉王子飯店, T4-05. (IZ0990708)
  8. 羅斯維, 2012, 鈑金衝壓滑軌製品中殘留拉應力造成之衝孔及框體變形的抑制法, 2012全國精密製造研討會, 2012/11/09, 國際製造工程學會（SME）, 台中市,勤益科大.
  9. 李春義, 羅斯維, 曾世昌, 2009, 溫度對壓克力/石墨奈米複材之摩擦及磨耗影響, Proc. 26th National Conf. on Mech. Eng., CSME, 2009/11/20-21, 中國機械工程師學會, 台南,成大.
  10. Cian, Y.-A., Huang, K.-C., and Lo, S-W., 2009, Theoretical Analysis of Lubrication in Oil/Water Emulsion, The 33rd National Conference on Theoretical and Applied Mechanics, 2009/11/13-14, 中華民國力學學會, 彰化，聯合科大.
  11. Chen, C.-L., Liao, K.-C., Lo, S.-W., 2009, Applications of Polycrystalline Model to Surface Roughening Simulations, ICMAT 2009 – International Conference on Materials for Advanced Technologies, 2009/06/28-2009/07/03, ICMAT, Singapore.
  12. 顏家宏, 羅斯維, 2008, 奈米氧化鋁/壓克力複材之微摩擦研究, Proc. 25th National Conf. on Mech. Eng., CSME, 2008/11/21-22, 彰化市, pp.0380.
  13. 羅斯維, 謝伯昇, 2008, 水潤滑下奈米碳管/聚苯乙烯 奈米複材磨耗性質其溫度與磨耗之關係, Proc. 25th National Conf. on Mech. Eng., CSME, 2008/11/21-22, 彰化市, pp.0376.
  14. 羅斯維, 黃國城, 2007, 乳化劑潤滑行為數值模擬, Proc. 24th National Conf. on Mech. Eng., CSME, 2007/11/23-24, 桃園縣中壢市, A07-0023.
  15. 羅斯維, 郭文凱, 2007, 水潤滑下奈米碳管/聚苯乙烯 奈米複材之摩擦與磨耗性質, Proc. 24th National Conf. on Mech. Eng., CSME, 2007/11/23-24, 桃園縣中壢市, C05-0004.
  16. 羅斯維, 黃炳杰, 2006, 壓電式微混合器製作, Proc. 23rd National Conf. on Mech. Eng., CSME, 2006/11/24-25, 台南, E8-023.
  17. 羅斯維, 施宗銘, 2006, 鋁鈑材成形之表面粗糙化及模具接觸行為, Proc. 23rd National Conf. on Mech. Eng., CSME, 2006/11/24-25, 台南, D2-019.
  18. 羅斯維, 黃志偉, 王建聰, 2006, 聚甲基丙烯酸甲酯/二氧化鈦奈米複合塑料之磨潤性質研究, Proc. 23rd National Conf. on Mech. Eng., CSME, 2006/11/24-25, 台南, A6-007.
  19. 黃炳杰, 羅斯維, 2005, Design and Fabrication of Piezoelectric Micro-Mixer, Proc. 22nd National Conf. on Mech. Eng.,CSME, 2005/11/25-26, Chungli.
  20. 陳彥勳, 羅斯維, 謝永堂, 2005, A Research on the Wear Performance of CNT PMMA Nanocomposite, Proc. 22nd National Conf. on Mech. Eng.,CSME, 2005/11/25-26, Chungli.
  21. Lo, L.W., Huang, S.H., Tsai, P.J., Lo, S.W., and Yang, C.S., 2005, An in vivo implantable dual-functional microdevice for simultaneous photoenergy transmission/detection and neurochemical delivery/analysis, Proceedings of μTAS 2005 Conference Vol. 2: 1032-1034; Ninth International Conference on Miniaturized Systems for Chemistry and Life Sciences (μTAS), 2005/10/09-13, Bosten.MA, pp. 1032-1034.
  22. 楊東昇、羅斯維, 2004, 金屬成形考慮模具彈性微楔形機制的潤滑模式, Proc. 21th National Conf. on Mech. Eng.,CSME, 2004/11/26-27, Kaoshiung.
  23. 蔡水發、羅斯維, 2003, 小型高速液動軸承之電磁成形分析, Proc. 20th National Conf. on Mech. Eng.,CSME, 2003/12/05-06, Taipei.
  24. 陳俊樺、羅斯維, 2003, 血液動力儀之設計製作, Proc. 20th National Conf. on Mech. Eng.,CSME, 2003/12/05-06, Taipei.
  25. Lo, S. W. and Yang, T. C., 2002, Closed-Loop Control of the Blank Holding Force in Sheet Metal Forming wiht a New Embedded-Type Displacement Sensor, SME年會暨精密機械製造研討會, 台北.
  26. 楊東昇,羅斯維, 2002, 金屬成形考慮模具粗糙度級彈性變形與工件表面粗糙化之邊界潤滑模式建立, Proc. 26th National Conference of Theoretical and Applied Mechanics, 2002/12/20-21, Huwei.
  27. 周柏奇,羅斯維, 2002, 金屬表面混合潤滑之即時觀測實驗, Proc. 19th National Conference on Mechanical Engineering,CSME, 2002/11/29-30, Huwei.
  28. Lo, S. W. and Yang, T. S., 2002, Growth of Asperity Contact Area in Sliding Motion, JSME/ASME International Conference on Materials and Processing 2002, 2002/10/15-18, Honolulu,Hawaii, pp. 248-253.
  29. 湯岳儒, 羅斯維, 2001, 應用黏塑性壓力傳煤之連續操作型微成形機之研發, Proc. 18th National Conf. On Mech. Eng.,CSME, Taipei.
  30. 陳建志, 羅斯維, 2001, 深引申中夾模力控制與成形性有限元素分析, Proc. 18th National Cof. On Mech. Eng.,CSME, Taipei.
  31. Yang, T. S. and Lo, S. W., 2001, Finite-Element Simulation of Time-Dependent Metal Forming Process With Full Film Lubrication, Proc. 25th National Conf. Theoretical and Apple Mech., Taichung.
  32. 羅斯維, 2001, 禪與生活規劃, 第四屆禪與管理學術研討會(論文集), 2001/03/10, 台北(華梵大學), pp. 113-118.
  33. 蔡昇達, 羅斯維, 2000, 金屬成形邊界潤滑之即時觀測與分析, Proc. 17th National Conf. on Mech. Eng.,CSME.
  34. 楊梓群, 羅斯維, 2000, 板金成形中夾模力伺服控制之研究, Proc. 17th National Conf. on Mech. Eng.,CSME.
  35. 陳國亮,任志強,吳尚德,吳英正,郭佳儱,羅斯維,劉舜逢, 2000, 利用比例電磁線圈於微衝壓系統及微小衝頭製作研究, CSME 17屆學術研討會, 高雄(國立高雄第一科技大學).
  36. 黃柏翔, 羅斯維, 林盛勇, 1999, 以黏塑性壓力媒介法做微小孔擠壓成形之研究, Proc. 16th National Conf. on Mech. Eng.,CSME, Hsingchu.
  37. 盧榮芳, 羅斯維, 1998, 模具－工件於高接觸比金屬成形中潤滑行為之定量分析 (Quantitative Analysis of the Tool-Workpiece Lubrication Behavior in Metal Forming with High Fractional Contact Area), Proc. 15th National Conf. on Mech. Eng.,CSME, Tainan.
  38. 鄭國銘, 羅斯維, 任志強, 1998, 設計與應用小型位移感測器於板金深引伸製程 (Design and Apply Small Displacement Sensor in Deep Drawing of Sheet Metal), Proc. 15th National Conf. on Mech. Eng.,CSME, Tainan.
  39. 鍾官榮, 羅斯維, 洪祖成, 1997, 金屬成形低速潤滑之實驗探討 (Experimental Investigation of Low Speed Lubrication in Bulk Metal Forming Processes), Proc. 14th National Conf. on Mech. Eng.,CSME, Chungli.
  40. Lu, Y. H. and Lo, S. W., 1997, An Optimal Controlled Strain Rate Dies for Axisymmetric Extrusion, Proc. 21st National Conf. Theoretical and Appl. Mech., Taichung, pp. 483-490.
  41. Lo, S. W. and Chung, K. J., 1997, Development of Smooth Engineered Surfaces by Internal-Ironing Process, Proc. 14th National Conf. on Mech. Eng.,CSME, Chungli.
  42. Lo, S. W. and Wilson, W. R. D., 1997, A Theoretical Model of Micro-Pool Lubrication in Metal Forming, 1st International Conf. on Tribology in Manufacturing Proc. (ICTMP97), Gifu, pp. 83-90.
  43. Lo, S. W. and Horng, T. C., 1997, Surface Roughening and Contact Behavior in Forming of Aluminum Sheet, 1st International Conf. on Tribology in Manufacturing Proc. (ICTMP97), Gifu, pp. 158-163.
  44. 洪祖成, 羅斯維, 1996, 鋁板成形之表面粗糙化與界面行為 (The Roles of Surface Roughening and Interfacial Behavior in the Forming of Aluminum Sheets), Proc. 13rd National Conf. on Mech. Eng.,CSME, Taipei.
  45. Lo, S. W. and Horng, T. C., 1996, An Investigation of New Tribological Variables in Friction Modeling of Bulk Metal Forming, ASME/STLE International Tribology Conference, San Francisco.
  46. Lo, S. W., and Lee, J. Y., 1995, Optimum Blank Contours for Prismatic Cup Drawing, Proc. 12th National Conf. on Mech. Eng.,CSME, Chyayi, pp. 21-30.
  47. Lo, S. W. and Horng, T. C., 1995, New Tribological Variables in Friction Modeling of Bulk Metal Forming, Proc. 12th National Conf. on Mech. Eng.,CSME, Chyayi, pp. 843-849.
  48. Lo, S. W., 1995, Prediction of the Springback for Commercial Stamping Products with Plane Strain Deformation, Proc. 3th Int. Conf. on Die & Mould Tech., Taipei, pp. 123-136.
  49. Lo, S. W., 1994, Design of the Hydrostatic Extrusion Dies with Prescribed Variations of Strain Rate, Proc. 11th National Conf. on Mech. Eng.,CSME, Taichung, pp. 173-179.
  50. Lo, S. W., 1994, An Advanced Slab Method for Working of Compressible Porous Materials, Proc. 18th National Conf. Theoretical and Appl. Mech., Hsingchu, pp. 249-258.
  51. Lo, S. W., 1994, Die-Workpiece Interfacial Behaviors in Axisymmetric Forging Processes with Flat Dies, ASME/STLE International Tribology Conference, Hawaii.
  52. Huang, T. H. and Lo, S. W., 1986, The Study of the BIE Method on Radiation and Scattering of Acoustic Waves in Three Dimensions, Proc. 3th National Conf. on Mech. Eng., pp. 875-890.
三、專書及專書論文
  1. 羅斯維, 曾世昌, 1995, 材料實驗實習課程教材大綱.
  2. Lo, S. W., 1993, Mixed Lubrication in Sheet Metal Forming Processes, Dept. of Mechanical Engineering,Northwestern University, Evanston,Illinois,U.S.A.
  3. 羅斯維, 1986, 邊界元素法在三維聲波輻射及散射之研究.
四、技術報告
  1. 羅斯維, 2015, 結合電磁力與薄膜/泡棉/高分子體之主動補償式氣靜壓軸(2/3), 科技部. (執行期間：2014年08月01日至2015年07月31日)
  2. 羅斯維, 2014, 結合電磁力與薄膜/泡棉/高分子體之主動補償式氣靜壓軸(1/3), 科技部, 結合電磁力與薄膜/泡棉/高分子體之主動補償式氣靜壓軸, 102-2221-E-224-014-MY3. (執行期間：2013/8-2016/7)
  3. 羅斯維, 2013, 油水乳化液潤滑之鈑金滾軋製程分析(3/3), 國科會, 油水乳化液潤滑之鈑金滾軋製程分析, NSC99-2221-E-224-015-MY3. (執行期間：2010/8-2013/7)
  4. 羅斯維, 2012, 油水乳化液潤滑之鈑金滾軋製程分析(2/3), 國科會, 油水乳化液潤滑之鈑金滾軋製程分析, NSC99-2221-E-224-015-MY3. (執行期間：2010/8-2013/7)
  5. 羅斯維, 2011, 油水乳化液潤滑之鈑金滾軋製程分析(1/3), 國科會, 油水乳化液潤滑之鈑金滾軋製程分析, NSC99-2221-E-224-015-MY3. (執行期間：2010/8-2013/7)
  6. 羅斯維, 2010, 應用即時觀測技術建立金屬表面峰粗糙化及接觸應變之新模式, 國科會, 應用即時觀測技術建立金屬表面峰粗糙化及接觸應變之新模式, NSC98-2221-E-224-015-. (執行期間：2009/8-2010/7)
  7. 羅斯維, 2009, 乳化液中油滴潤滑機制的數值探討與理論建立(3/3), 國科會, 乳化液中油滴潤滑機制的數值探討與理論建立, 95-2221-E-224-078-MY3. (執行期間：2006/08/01-2009/07/31)
  8. 羅斯維, 2008, 乳化液中油滴潤滑機制的數值探討與理論建立(2/3), 國科會. (執行期間：2006/08/01-2009/07/31)
  9. 羅斯維, 2007, 線性滑軌滾軋成形之製程分析期末報告, 上銀科技公司. (執行期間：2007/01/01-2007/12/31)
  10. 羅斯維, 2007, 線性滑軌滾軋成形之製程分析期中報告, 上銀科技公司. (執行期間：2007/01/01-2007/12/31)
  11. 羅斯維, 楊梓群, 2006, 材料整平技術期末總報告, 順噠實業公司, 材料整平技術研發. (執行期間：2005-2006)
  12. 羅斯維, 楊梓群, 2005, 材料整平技術研發期中報告2, 順噠實業合作計畫, 材料整平技術研發. (執行期間：2005-2006)
  13. 羅斯維, 楊梓群, 2005, 材料整平技術研發期中報告1, 順噠實業合作計畫, 材料整平技術研發. (執行期間：2005-2006)
  14. 羅斯維, 2005, 高轉速、高精度小型動壓流體軸承之潤滑分析(2/3), 國科會研究計畫成果報告(2/3), 高轉速、高精度小型動壓流體軸承之潤滑分析, NSC93-2212-E-224-005. (執行期間：2003/08/01-2004/07/31)
  15. 鄭俊誠、吳英正、羅斯維, 2004, 高速同動平行機構(SPM)導軌伸縮護蓋研究計畫期中報告, 台中引興實業合作計畫.
  16. 鄭俊成,吳英正,羅斯維, 2004, 高速同動平行機構(SPM)導軌伸縮護蓋研究計畫期末報告, 台中引興實業合作計畫.
  17. 羅斯維, 2004, 高轉速、高精度小型動壓流體軸承之潤滑分析(1/3), 國科會研究計畫成果報告(1/3), 高轉速、高精度小型動壓流體軸承之潤滑分析, NSC92-2212-E-224-011. (執行期間：2003/08/01-2004/07/31)
  18. 羅斯維, 2003, 金屬成形磨潤模式之有限元素分析, 國科會研究計畫成果報告(2/2), NSC91-2212-E-224-005.
  19. 羅斯維,吳英正,鄭俊誠, 2002, 高速同動平行機構(SPM)導軌伸縮護蓋先期研究計畫報告, 台中引興實業合作計畫.
  20. 羅斯維, 2002, 金屬成形潤滑模式之有限元素分析, 國科會研究計畫成果報告(1/2), NSC90-2212-E-224-003.
  21. 羅斯維, 2001, 前置滾軋製程中「工程表面」形成機制之研究, 國科會研究計畫成果報告(3/3), NSC 89-2212-E-224-018.
  22. 羅斯維, 2000, 前置滾軋製程中「工程表面」形成機制之研究, 國科會研究計畫成果報告(2/3), NSC 89-2212-E-224-008.
  23. 羅斯維, 1999, 前置滾軋製程中「工程表面」形成機制之研究, 國科會研究計畫成果報告(1/3), NSC 88-2212-E-224-006.
  24. 羅斯維, 1998, 應用微型速度感測器於板金深引伸/張之夾模力控制, 國科會研究計畫成果報告, NSC 87-2212-E-224-010.
  25. 羅斯維, 1997, 以擠伸法製造光學級工程表面之潤滑及製程研究, 國科會研究計畫成果報告, NSC 86-2212-E-224-003.
  26. 羅斯維, 1996, 異向性板金引伸中工件外形之最佳化設計, 國科會研究計畫成果報告, NSC85-2212-E-224-004.
  27. 羅斯維, 1995, 鍛造製程中模具與工件界面行為之研究, 國科會研究計畫成果報告, NSC84-2212-E-224-008.
  28. 羅斯維, 黃順發, 李靜泳 (Lo, S. W., Hwang, S. F., and Lee, J. Y.), 1994, Report on the Springback of Sheet Metal Stamping, 輔導鴻海精密實業成果報告, Dept. of Mech. Eng.,NYIT.
  29. 羅斯維, 1993, 滾軋製造之數值分析 (Numerical analysis of rolling process), 美國凱塞鋁業 (Kaiser Aluminum U.S.A.) 合作計畫技術報告.
  30. 羅斯維, 1992, 工程表面模式 (Engineered Surface), 美國鋼鐵協會 (AISI) 計畫技術報告.
  31. 羅斯維, 1991, 鋁板金液壓成形之潤滑系統研發 (Lubrication system in hydroforming of aluminum sheet), 洛克威爾公司 (Rockwell International U.S.A.) 合作計畫技術報告.
五、其他論著
  1. 羅斯維, 2003, 微觀磨潤學研究, 教授休假研究報告.
  2. 羅斯維, 1997, 第一次國際製造工程磨潤學研討會, 教育局補助出席國際會議報導.
  3. 羅斯維, 1996, 1996 年 ASME/STLE 國際磨潤學研討會, 國科會補助出席國際會議報導.
  4. 羅斯維, 1995, 1994 年 ASME/STLE 國際磨潤學研討會, 「科學發展」月刊, Vol. 23, No. 1, pp. 66-69, 國科會補助出席國際會議報導.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 
SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Register｜logon登入 Login 
國立雲林科技大學 版權所有 c2005 National Yunlin University of Science & Technology, All Rights Reserved.