112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢
  1. 按【查詢】按鈕：請先選擇學院→系所→教師，輸入起迄年或不輸入起迄年，再點選【查詢】即完成。
  2. 按【進階查詢】按鈕：採用組合查詢的方式。
  3. 按【匯出Word檔】按鈕：匯出教師【個人】著作資料。
搜尋條件：著作類別->全部著作 | 學院->College of Management | 系所->Department of Industrial Engineering and Management | 教師姓名->Torng, Chau-Chen
      
         西元年   至    
童超塵老師的論文著述

一、學術期刊論文

  1. Chauchen Torng, Yiping Wang, 2023, Control chart pattern recognition using optimized one- dimensional convolutional neural network under gamma distribution, International Journal of Latest Trends in Engineering and Technology (IJLTET) Special Issue - ICE2MAS, pp.100-104.
  2. PeiHsi Lee, Chau-Chen Torng, Pei-Hsuan Kao and Jih-Hung Huang,, 2023, The design of CEV X-bar control chart for monitoring the multiple censored data, Journal of Technology, Vol.38, No.1, pp.75-81.
  3. Torng, Chauchen, 2022, Performance of Two-Sided EWMA Cev Control Charts with Multiple Censored Data, International Journal of Industrial Engineering, 29(4), pp.487-498., Vol.29, No.4, pp.487-498. (SCI)
  4. Torng, Chauchen, 2022, Control chart pattern recognition using spectral clustering technique and support vector machine under gamma distribution, Computers & Industrial Engineering, Vol.171, No.5. (SCI)
  5. Torng, Chauchen, 2021, Monitoring the coefficient of variation using a double-sampling control chart, Communications in Statistics - Simulation and Computation. (SCI)
  6. Torng, Chauchen, 2020, A Design and Evaluation of Coefficient of Variation Control Chart, Communications in Computer and Information Science, Vol.1293, pp.270-278. (其他)
  7. Chau-Chen Torng, 2016, A production planning and optimisation of multi-mode job shop scheduling problem for an avionics manufacturing plant, International Journal of Manufacturing Technology and Management, Vol.30, No.3/4, pp.179-195. (EI)
  8. Chau-Chen Torng, 2016, Development of total logistics support management information system and its applications to the aerospace industry, International Journal of Industrial and Systems Engineering, Vol.23, No.4, pp.448-466. (EI)
  9. Chiang, P. H. and Torng, C. C., 2015, Assessment of organizational performance of environmental audits in the aerospace industrial company, International Journal of Environmental Technology Management, Vol.18, No.4, pp.330-345. (EI)
  10. Pei-Hsi Lee & Chau-Chen Torng, 2015, A Note on “Modified Tukey's Control Chart”, Communications in Statistics - Simulation and Computation, Vol.44, No.1, pp.233-238.
  11. CC Torng, SP Chung, YC Chen, 2014, An economic-statistical design of the joint and S control charts with double sampling and variable sampling intervals, Journal of Industrial and Production Engineering, Vol.31, No.7. (EI)
  12. CC Tseng, CC Torng, 2014, An integrating framework for prioritising tasks in designing management system improvement projects, European Journal of Industrial Engineering, Vol.8, No.4, pp.457-477.
  13. PH Chiang, CC Torng, 2014, Development of an integrated information system for automated scheduling and control management in an aircraft maintenance plant, International Journal of Industrial and Systems, Vol.16, No.1, pp.51-69.
  14. HJ Chiang, CC Tseng and CC Torng, 2013, A retrospective analysis of prognostic indictors in dental implant, Journal of Dental Sciences, Vol.8, No.3, pp.248-255. (SCI)
  15. Lee, P.H., C.C. Torng and L.F. Liao, 2012, An economic design of combined double sampling and variable sampling interval X-bar control chart, International Journal of Production Economics, Vol. 138, No. 1, pp. 102-106. (SCI)
  16. Lee, P.H., Y.C. Chang and C.C. Torng, 2012, design of s control charts with combined double sampling and variable sampling interval scheme, Communications in Statistics - Theory and Methods, Vol.41, No.1, pp.153-165. (SCI)
  17. Lee, P.H., C.C. Torng, Y.C. Lin, 2011, Determination of the optimal accelerated burn-in time under Arrhenius-Lognormal distribution assumption, Applied Mathematical ModelingVol. 35, No. 8, pp. 4023–4030, Vol.35, No.8, pp.4023-4030. (SCI, EI)
  18. Lee, P.H., C.C. Torng, J.C. Wu and C.C. Tseng, 2010, The effectiveness study of double sampling s charts application on destructive testing process, International Journal of Product Development, Vol.12, No.3/4, pp.324-335. (EI)
  19. Lee, P.H., Y.C. Chang and C.C. Torng, 2010, A design of s control charts with combined double sampling and variable sampling interval scheme, Communications in Statistics - Theory and Methods. (SCI, EI)
  20. Chang, H.M., C. Huang and C.C. Torng, 2010, The construction of production improvement model for aerospace manufacturing suppliers, Key Engineering Materials, Vol.443, pp.784-753. (EI)
  21. Chang, H.M., C. Huang and C.C. Torng, 2010, The reengineering of business and production processes for aerospace manufacturing suppliers, Key Engineering Materials, Vol.450, pp.401-404. (EI)
  22. Torng, C.C., C.C. Tseng and P.H. Lee, 2010, Non-normality and combined double sampling and variable sampling interval X-bar control charts, Journal of Applied Statistics, Vol.37, No.6, pp.955-967. (SCI)
  23. Huang, C., C.C. Torng and H.M. Chang, 2010, Stress Analysis on the Stretch Forming of the Aluminum Saddle-shaped Skins, Advanced Materials Research, Vol.89-91, pp.703-708. (EI)
  24. Torng, C.C., C. Huang and H.M. Chang, 2010, Reliability Evaluation for Aerospace Anodizing Process of Aluminum, Materials Science Forum, Vol.638-642, pp.419-424. (EI)
  25. 李佩熹, 童超塵, 廖翊亨, 鍾承利, 2009, 韋伯分配參數估計法的比較與探討, 智慧科技與應用統計學報, Vol.7, No.2, pp.25-36.
  26. Torng, C.C., P.H. Lee, H.S. Liao and N.Y. Liao, 2009, An economic design of double sampling x-bar charts for correlated data using genetic algorithms, Expert Systems with Applications, Vol.36, No.10, pp.12621-12626. (SCI, EI)
  27. 林揚承, 李佩熹, 童超塵, 2009, 決定加速預燒試驗的最佳時間和溫度條件, 品質學報, Vol.16, No.4, pp.281-290. (EI)
  28. Torng, C.C., P.H. Lee and N.Y. Liao, 2009, An economic-statistical design of double sampling x-bar control chart, International Journal of Production Economics, Vol.120, No.2, pp.495-500. (SCI, EI)
  29. Torng, C.C., C.K. Huang and H.M. Chang, 2009, Process control for aerospace chemical milling process, International Journal of Manufacturing Technology and Management, Vol.18, No.3, pp.308-318. (EI)
  30. 童超塵, 曾俊傑, 張舜傑, 2009, 建構台灣IC設計產業之供應商績效評估模式及實證, 科技管理學刊, Vol.14, No.2, pp.1-26.
  31. Torng, C.C. and P.H. Lee, 2009, The performance of double sampling X-bar control charts under non-normality, Communications in Statistics - Simulation and Computation, Vol.38, No.3, pp.541–557. (SCI, EI)
  32. Torng, C.C., P.H. Lee and C.C. Tseng, 2009, An economic design of Tukey’s control chart, Journal of the Chinese Institute of Industrial Engineers, Vol.26, No.1, pp.53-59. (EI, TSSCI)
  33. Huang, C.K., C.C. Torng and H.M. Chang, 2008, Effects of springback on the stretch forming of the aluminum saddle-shaped skins, Steel Research International (Special Edition, Vol. 1, 2008), Vol.79, pp.85-90. (SCI, EI)
  34. Torng, C.C., C.K. Huang and H.M. Chang, 2008, Springback analysis of Ti-6Al-4V in hydro-forming process for aerospace sheet metal parts, Steel Research International (Special Edition, Vol. 1, 2008), Vol.79, pp.288-292. (SCI, EI)
  35. 曾俊傑, 童超塵, 廖乃毅, 2008, 運用QFD與FMEA建構顧客稽核缺失管理系統, 品質學報, Vol.15, No.5, pp.313-322. (EI)
  36. Torng, C.C. and P.H. Lee, 2008, ARL performance of the Tukey’s control chart, Communications in Statistics - Simulation and Computation, Vol.37, No.9, pp.1904-1913. (SCI, EI)
  37. 廖乃毅, 李佩熹, 童超塵, 2008, 多重抽樣平均數管制圖的經濟性設計, 品質學報, Vol.15, No.4, pp.311-319. (EI)
  38. 李佩熹, 童超塵, 2008, 應用多次抽樣平均數管制圖於破壞性試驗製程之效益評估, 科技管理學刊, Vol.13, No.2, pp.95-112.
  39. 李佩熹, 童超塵, 2007, 損耗商品考慮指數型態需求率和韋伯損耗率的經濟訂購量模式, 商管科技季刊, Vol.8, No.4, pp.443-456.
  40. Huang, C.K., C.C. Torng and H.M. Chang, 2007, Relationship between saturation curve and peening parameters for aerospace shot peening process, Materials Science Forum, Vol.561-565, pp.965-968. (EI)
  41. Torng, C.C., C.K. Huang and H.M. Chang, 2007, Distortion analysis of aluminum alloy for sheet metal forming after solution treatment, Materials Science Forum, Vol.561-565, pp.893-896. (EI)
  42. Wang, D.S., C.C. Torng, I.P. Lin, B.W. Cheng, H.R. Liu and C.Y. Chou, 2006, Optimization of nattokinase production condition using response surface methodology, Journal of Food Process Engineering, Vol.29, No.1, pp.22-35. (SCI, EI)
  43. 王河清, 童超塵, 2001, 運用平衡計分卡建構新策略管理制度－以醫療產業為例, 醫院雜誌, Vol. 34, No. 4, pp.7-15.
  44. Torng, C.C., C.Y. Chou and H.R. Liu, 1999, Applying quality engineering technique to improve wastewater treatment, Journal of Industrial Technology, Vol. 15, No. 1, pp. 1-7. (EI)
  45. Torng, C.C, J.K. Cochran, D.C. Montgomery and F.P. Lawrence, 1995, Implementing statistically constrained economic EWMA control chart, Journal of Quality Technology, Vol. 27, No. 3, pp. 257-264. (SCI, EI)
  46. Montgomery, D.C., C.C. Torng, J.K. Cocgran and F.P. Lawrence, 1995, Statistically constrained economic design of the EWMA control chart, Journal of Quality Technology, Vol. 27, No.3, pp. 250-256. (SCI, EI)
  47. Torng, J.C.C., D.C. Montgomery and J.K. Cochran, 1994, Economic design of the EWMA control chart, Economic Quality Control, Vol. 9, pp. 3-23.
二、研討會論文
  1. 林樺瑋 童超塵* 黃瑜書, 2022, 應用優化一維卷積神經網絡混合隨機森林於管制圖辨識, 2022中國工業工程學會年會暨學術研討會, 2022/11/10-12, 中國工業工程學會, 金門, 金門大學.
  2. 尤昱程 童超塵* 何柏臻, 2022, 應用田口法於研磨不銹鋼材料參數最佳化研究, 2022國際品質管理研討會(ISQM), 2022/11/05, 中華民國品質管理學會, 南投草屯,南開科技大學.
  3. 黃俊翔 童超塵* 黃瑜書, 2022, 應用田口方法探討影響水泥砂漿與混凝土黏著強度關鍵因子, 2022國際品質管理研討會(ISQM), 2022/11/05, 中華民國品質管理學會, 南投草屯,南開科技大學.
  4. 劉易鑫 童超塵* 彭禾荷, 2022, 運用層級分析法(AHP)探討機隊管理之研究-以E型機為例, 2022國際品質管理研討會(ISQM), 2022/11/05, 中華民國品質管理學會, 南投草屯,南開科技大學.
  5. 童超塵, 2021, 結合雙次抽樣與變動抽樣間隔之變異係數管制圖設計, 2021中國工業工程學會年會暨學術研討會, 2021/11/20, 中國工業工程學會, 成功大學, 台南市.
  6. 童超塵, 2021, 以一維卷積神經網路模型於診斷多變量製程偏移, 2021中國工業工程學會年會暨學術研討會, 2021/11/20, 中國工業工程學會, 成功大學, 台南市.
  7. 童超塵, 2021, 應用優化的一維卷積神經網路模型於辨識混合管制圖樣式與製程偏移, 2021中國工業工程學會年會暨學術研討會, 2021/11/20, 中國工業工程學會, 成功大學, 台南市.
  8. 童超塵, 2020, 應用一維卷積神經網路於辨識多變量管制圖非隨機樣式, 2020中國工業工程學會年會暨學術研討會, 2020/11/21, 雲林科技大學, 斗六市.
  9. 童超塵, 2020, 混合設限資料之累積和管制圖, 2020中國工業工程學會年會暨學術研討會, 2020/11/21, 雲林科技大學, 斗六市.
  10. 童超塵, 2020, 應用巢狀非線性迴歸與結合小波分析之支撐向量機於辨 識混合管制圖樣式, 2020 國際品質管理研討會, 2020/11/07, 高雄大學, 高雄市.
  11. 童超塵, 2020, 最佳化一維卷積神經網路應用於辨識Gamma分布之混合管制圖樣式, 2020 國際品質管理研討會, 2020/11/07, 高雄大學, 高雄市.
  12. 童超塵, 2020, 混合設限資料之CUSUM管制圖設計, 2020企業文化暨商業發展學術研討會, 2020/05/29, 實踐大學, 高雄市.
  13. 童超塵, 2020, 應用巢狀非線性迴歸與結合小波分析之支撐向量機於辨識管制圖樣式, 2020企業文化暨商業發展學術研討會, 2020/05/29, 實踐大學, 高雄市.
  14. 童超塵, 2020, 以改良式粒子群演算法的卷積神經網路於混合非常態管制圖樣式之辨識, 2020企業文化暨商業發展學術研討會, 2020/05/29, 實踐大學, 高雄市.
  15. 童超塵, 2020, The Performance Study of Double Sampling Coefficient of Variation Control Charts, 2020 4th International Conference on Management Engineering, Software Engineering and Service Sciences, 2020/01/17-19, Wuhan University, Wuhan, China.
  16. 童超塵, 2020, The Performance Evaluation of EWMA CEV Control Charts with Multiple Censored Data, 2020 4th International Conference on Management Engineering, Software Engineering and Service Sciences, 2020/01/17-19, Wuhan University, Wuhan, China.
  17. 童超塵, 2019, Monitoring Process Means with Multiple Censored Data, International Congress on Advanced Technology Innovation, 2019/07/15-18, Higher Education Forum, Sapporo.
  18. 童超塵, 2019, A hybrid method for estimating the time of change in variable sampling control chart using support vector machine and fuzzy statistical clustering, International Conference on Materials, Methods & Technologies 2019, 2019/07/01-05, Bulgarian Academy of Sciences, Burgas.
  19. 童超塵, 2017, 結合支撐向量機與模糊統計集群法於變動抽樣管制圖, 2017中國工業工程學會年會及學術研討會, 2017/12/16, 中國工業工程學會, 高雄市,義守大學.
  20. 童超塵, 2017, 設限資料下之EWMA管制圖設計, 2017中國工業工程學會年會及學術研討會, 2017/12/16, 中國工業工程學會, 高雄市,義守大學.
  21. 童超塵, 2017, Monitoring Process Means with Multiply-Censored Observations, International Congress on Engineering and Information 2017 (ICEAI 2017), 2017/05/09-11, Higher Education Forum, Kyoto.
  22. 童超塵, 2016, 應用自組織映射網路圖與類神經網路於混合管制圖樣式之辨識, 國際品質管理研討會, 2016/11/19, 品質學會, 台南市,成功大學.
  23. 童超塵, 2016, 多重設限資料下之EWMA管制圖設計, 國際品質管理研討會, 2016/11/19, 品質學會, 台南市,成功大學.
  24. 童超塵, 2016, 修華特X-BAR管制圖監控多重設限資料的特徵壽命, 國際品質管理研討會, 2016/11/19, 品質學會, 台南市,成功大學.
  25. 童超塵, 2016, 結合小波分析與支撐向量機於非常態管制圖樣式辨識, 國際品質管理研討會, 2016/11/19, 品質學會, 台南市,成功大學.
  26. 童超塵, 2016, Recognition of Concurrent Control Chart Patterns in Autocorreted Processes Using Support Vector Machine, International Conference on Advanced Technology Innovation, 2016/06/30-2016/07/03, IMETI, 巴里島.
  27. 童超塵, 黃日宏, 高珮瑄, 2015, 修華特 X-bar 管制圖於多重設限資料之監控, 中國工業工程學會 104 年度年會暨學術研討會, 2015/12/12, 中國工業工程學會, 台中市,勤益科技大學.
  28. 官海葳 童超塵 劉雅慧, 2013, 結合動態可靠度與馬可夫預防維護模型於肝臟治療之研究, 102年工業工程學術研討會, 2013/12/07, 屏東科技大學, 屏東.
  29. 童超塵 陳佳平 張鎧倫, 2013, 在相關性製程資料下雙次抽樣平均數管制圖結合品質損失函數之經濟統計性設計, 102年工業工程學術研討會, 2013/12/07, 屏東科技大學, 屏東.
  30. 陳易群 童超塵 張弘勇, 2013, 結合雙次抽樣及變動抽樣間隔時間之聯合平均數與標準差管制圖經濟統計性設計, 102年工業工程學術研討會, 2013/12/07, 屏東科技大學, 屏東.
  31. 童超塵 陳詩吟 林雅如, 2013, 探討第三方物流關鍵成功因素-以A物流公司為例, 102年工業工程學術研討會, 2013/12/07, 屏東科技大學, 台灣,屏東.
  32. Chauchen Torng, Kuan-Wei Tseng, 2013, Using Fuzzy Analytic Hierarchy Process to Construct Green Suppliers Assessment Criteria and Inspection Exemption Guidelines, Communications in Computer and Information Science, 2013/07/21-26, Springer, Las Vegas, pp.729-732.
  33. 童超塵, 謝仁宇, 陳佳平, 2012, 考量風險調整下之CUSUM管制圖設計－以泌尿道感染為例, 中華民國品質學會第四十八屆年會2012國際品質管理研討會, 2012/11/17, 中華民國品質學會, 新北市,淡江大學.
  34. 童超塵, 曾冠煒, 官海葳, 2012, 運用模糊層級分析法建構綠色供應商評鑑指標與免檢準則, 中華民國品質學會第四十八屆年會2012國際品質管理研討會, 2012/11/17, 中華民國品質學會, 新北市,淡江大學.
  35. 童超塵, 鄭欣卉, 陳詩吟, 2012, 考慮預防維護策略之指數管制圖經濟性設計, 中華民國品質學會第四十八屆年會2012國際品質管理研討會, 2012/11/17, 中華民國品質學會, 新北市,淡江大學.
  36. 童超塵, 郭秉裕, 陳易群, 2012, 加入連串規則於模糊管制圖設計, 中華民國品質學會第四十八屆年會&2012國際品質管理研討會, 2012/11/17, 中華民國品質學會, 新北市,淡江大學.
  37. 童超塵 黃家慶 謝仁宇*, 2010, 以田口損失函數建構最佳趨勢製程維護策略, 工業工程與管理研討會, 2010/12/25, 中國工業工程學會, 台南市,南台科大.
  38. 童超塵 卓益如 郭秉裕*, 2010, 變動抽樣間隔CQC 管制圖之經濟性設計, 工業工程與管理研討會, 2010/12/25, 中國工業工程學會, 台南市,南台科大.
  39. 童超塵 張志偉 鄭欣卉*, 2010, 雙次抽樣缺點數管制圖之設計, 工業工程與管理年會暨學術研討會, 2010/12/25, 中國工業工程學會, 台南市,南台科大.
  40. Tseng, C.C, and C.C. Torng, 2010, Prioritization of Product Design Tasks Using QFD, TRIZ and DSM, 17th International Conference on Industrial Engineering and Engineering Management, 2010/10/29-31, IEEE, Xiamen.
  41. 童超塵 鍾喆文, 2010, 應用模擬方法探討自我相關資料下之管制圖績效, 第十一屆科技與管理學術研討會, 2010/10/28, 建國科大, 彰化市,建國科大.
  42. Chang, H.M., C. Huang, and C.C. Torng, 2010, The Reengineering of Business and Production Processes for Aerospace Manufacturing Suppliers, The 3rd International Conference on Advanced Design and Manufacturing (ADM 2010), 2010/09/08-10, Nottingham Trent University, Nottingham.
  43. Chang, H.M., C. Huang, and C.C. Torng, 2010, The Construction of Production Improvement Model for Aerospace Manufacturing Suppliers, The 9th Asia-Pacific Conference on Materials Processing (APCMP2010), 2010/06/07-10, University of New South Wales, Sydney.
  44. Tseng C.C.and C.C.Torng, 2010, Using AHP to Select Physician Service: A Case Study, International Conference in Management Sciences and Decision Making (2010 ICMSDM), 2010/05/22, 淡江大學, Taipei.
  45. Tseng, C.C., C.F. Hung and C.C. Torng, 2009, Using AHP to select medical and physician service, 10th Asia Pacific Industrial Engineering & Management Systems Conference, 2009/12/14-16, Kitakyushu.
  46. Lee, P.H., C.C. Torng, H.S. Liao and C.C. Tseng, 2009, The statistical performance of double sampling X-bar control charts for correlation data, 2009 IEEE International Conference on Industrial Engineering and Engineering Management, 2009/12/08-11, Hong Kong.
  47. Huang, C.K., C.C. Torng and H.M. Chang, 2009, Stress analysis on the stretch forming of the aluminum saddle-shaped skins, International Conference on Processing & Manufacturing of Advanced Materials — Processing, Fabrication, Properties, Applications (THERMEC' 2009), 2009/08/25-29, Berlin.
  48. Torng, C.C., C.K. Huang and H.M. Chang, 2009, Reliability evaluation for aerospace anodizing process of aluminium, International Conference on Processing & Manufacturing of Advanced Materials — Processing, Fabrication, Properties, Applications (THERMEC' 2009), 2009/08/25-29, Berlin.
  49. Torng, C.C., H.N. Liao, P.H. Lee and J.C. Wu, 2009, Performance evaluation of a Tukey’s control chart in monitoring gamma distribution and short run processes, The International MultiConference of Engineers and Computer Scientists 2009, 2009/03/18-20, Hong Kong.
  50. Torng, C.C. and P.H. Lee, 2009, A modified statistical design model of double sampling xbar control chart, The International MultiConference of Engineers and Computer Scientists 2009, 2009/03/18-20, Hong Kong.
  51. 童超塵, 李佩熹, 廖翊亨, 鍾承利, 2008, 最大化平均殘餘壽命決定串聯與並聯系統的預燒時間, 2008製商整合與工業管理學術研討會, 2008/12/25, 桃園.
  52. 童超塵, 李佩熹, 張怡笳, 2008, 結合雙次抽樣與變動抽樣間隔時間之標準差管制圖設計, 2008製商整合與工業管理學術研討會, 2008/12/25, 桃園.
  53. Lee, P.H. and C.C. Torng, 2008, A combined self-organizing map neural network with analysis graphical approach for Mixed-Weibull parameter estimation, 2008 IEEE International Conference on Industrial Engineering and Engineering Management, 2008/12/08-11, Singapore.
  54. 童超塵, 李佩熹, 鍾承利, 廖翊亨, 2008, 應用反應曲面法於加速試驗模型中, 第三屆產品可靠度與維護度技術研討會, 2008/11/27, 桃園.
  55. 童超塵, 陳建旻, 郭芳欽, 2008, 建構血液透析機之預防維護策略, 第三屆產品可靠度與維護度技術研討會, 2008/11/27, 桃園.
  56. Lin, S.N., Y.C. Lin, C.Y. Chou and C.C. Torng, 2008, Economic design of variable sampling intervals X-bar charts with B&L switching rule, 2008 Asian International Workshop on Advanced Reliability Modeling, 2008/10/23-25, Taichung.
  57. Torng, C.C., C.K. Huang and H.M. Chang, 2008, Springback analysis of Ti-6Al-4V in hydro-forming process for aerospace sheet metal parts, The 12th International Conference on Metal Forming 2008, 2008/09/21-24, Krakow.
  58. Huang, C.K., C.C. Torng and H.M. Chang, 2008, Effects of springback on the stretch forming of the aluminum saddle-shaped skins, The 12th International Conference on Metal Forming 2008, 2008/09/21-24, Krakow.
  59. Huang, S.F. and C.C. Torng, 2008, A case study on stress reaction and organizational commitment of nurse practitioners from a medical systemic hospitals in middle Taiwan, The 2008 International Conference: Healthy People for the Healthy World, 2008/06/25-27, Bangkok.
  60. 童超塵, 陳建旻, 張怡笳, 2008, 結合雙次抽樣與變動抽樣間隔X-bar管制圖監控相關性製程之經濟性設計, 2008產業管理創新研討會, 2008/05/23, 台中.
  61. 童超塵, 廖翊亨, 鍾承利, 2008, 韋伯分配參數估計法的比較, 2008產業管理創新研討會, 2008/05/23, 台中.
  62. 廖莉芳, 童超塵, 2008, 結合雙次抽樣與變動抽樣間隔時間平均數管制圖經濟性設計, 2008現代管理與創新學術研討會, 2008/04/18, 新竹.
  63. 林揚承, 童超塵, 2008, 考量使用應力下與成本以決定最佳的預燒條件-以某手機液晶模組為例, 2008現代管理與創新學術研討會, 2008/04/18, 新竹.
  64. 廖皇盛, 童超塵, 2008, 在相關性製程資料下雙次抽樣平均數管制圖之設計, 2008現代管理與創新學術研討會, 2008/04/18, 新竹.
  65. Torng, C.C. and P.H. Lee, 2007, An economic design of Tukey’s control chart, Proceeding of the 8th Asia Pacific Industrial Engineering and Management System and 2007 Chinese Institute of Industrial Engineers Conference, 2007/12/09-12, Kaoshuing.
  66. Torng, C.C., C.K. Huang and H.M. Chang, 2007, Distortion analysis of aluminum alloy for sheet metal forming after solution treatment, The 6th Pacific Rim International Conference on Advanced Materials and Processing, 2007/11/06-09, Jeju Island.
  67. Huang, C.K., C.C. Torng and H.M. Chang, 2007, Relationship between saturation curve and peening parameters for aerospace shot peening process, The 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM6), 2007/11/06-09, Jeju Island.
  68. 童超塵, 曾俊傑, 廖皇盛, 2007, 應用品質機能展開法與多目標最佳化決定全面品質管理之關鍵要素-以國內某半導體廠為例, 台灣作業研究學術研討會暨年會, 2007/10/26-27, 花蓮(東華大學).
  69. 童超塵, 廖莉芳, 2007, 應用基因演算法與多目標最佳化設計雙次抽樣與變動抽樣間隔時間管制圖, 台灣作業研究學術研討會暨年會, 2007/10/26-27, 花蓮(東華大學).
  70. 童超塵, 李佩熹, 林揚承, 2007, 建構成本模式決定最佳預燒時間與溫度之條件, 台灣作業研究學術研討會暨年會, 2007/10/26-27, 花蓮(東華大學).
  71. 吳志權, 童超塵, 2007, 應用多目標規劃方法決定雙次抽樣標準差管制圖設計, 真理大學工業管理學系研發導向之工業管理研討會, 2007/06/09, 台北(真理大學).
  72. 童超塵, 廖乃毅, 2006, 雙次抽樣管制圖經濟統計性設計, 中國工業工程學會九十五年度年會暨學術研討會, 2006/12/23, 台中(東海大學).
  73. 李佩熹, 童超塵, 2006, 應用多目標規劃法求解雙次抽樣平均數管制圖最佳參數, 2006年彰雲嘉大學校院聯盟學術研討會, 2006/12/15, 嘉義市(國立嘉義大學), pp.318-329.
  74. 蔣步海 , 鄭博文, 童超塵, 2006, 知識管理應用於航太產業品質稽核之研究, 中華民國品質學會第四十二屆年會暨第十二屆全國品質管理研討會, 2006/11/04, 台中(勤益科技大學).
  75. Torng, C.C., C.K. Huang and H.M. Chang, 2006, Process control for aerospace chemical milling process, 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice, 2006/10/24-27, Nagoya.
  76. Huang, C.K., C.C. Torng and H.M. Chang, 2006, Shop floor control mechanism of aerospace, 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice, 2006/10/24-27, Nagoya.
  77. Torng, C.C., P.H. Lee, H.N. Liao and J.C. Wu, 2006, Process monitoring with a Tukey’s control chart under small data sets, 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice, 2006/10/24-27, Nagoya.
  78. Torng, C.C. P.H. Lee and N.Y. Liao, 2006, Double sampling X-bar control chart for non-normal data, 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice, 2006/10/24-27, Nagoya.
  79. 童超塵, 廖宏能, 吳志權, 2006, Tukey管制圖的平均連串長度, 21世紀管理理論與實務研討會, 2006/10/01, 彰化(私立大葉大學), pp.763-766.
  80. 童超塵, 廖宏能, 吳志權, 廖乃毅, 2006, 倒傳遞類神經網路方法運用於Tukey管制圖的平均連串長度估計, 第二屆產業經營管理學術研討會, 2006/09/01, 新竹(私立玄奘大學).
  81. 童超塵, 張舜傑, 曾俊傑, 2006, 建構台灣IC設計業之供應商績效評比架構, 第十屆科技繼整合管理國際研討會, 2006/03/01, 台北(私立東吳大學).
  82. 陳永璋, 童超塵, 李佩熹, 2005, 結合加速壽命試驗統計分析原理與倒傳遞類神經網路預測韋伯壽命分配產品之特徵壽命與可靠度, 中國工業工程學會九十四年度年會暨學術研討會, 2005/12/15, 新竹(中華大學).
  83. 童超塵, 黃資元, 林榮章, 2005, 應用類神經網路於SPC與EPC整合之經濟性設計, 中國工業工程學會九十四年度年會暨學術研討會, 2005/12/15, 新竹(中華大學).
  84. 童超塵, 駱士傑, 張舜傑, 2005, 運用分析層級法建構推行6σ系統自我評比機制, 中國工業工程學會九十四年度年會暨學術研討會, 2005/12/15, 新竹(中華大學).
  85. 童超塵, 許家豐, 廖宏能, 2005, 結合基因演算法與反應曲面法於多重品質特性製程參數最佳化之研究, 中國工業工程學會九十四年度年會暨學術研討會, 2005/12/15, 新竹(中華大學).
  86. 陳永璋, 童超塵, 李佩熹, 2005, 以倒傳遞網路方法在變動試驗樣本與環境條件之下韋伯壽命分配產品之試驗樣本失效時間點預測, 中華民國第六屆可靠度與維護度技術研討會與第十九屆亞洲品質研討會/第十一屆全國品質管理研討會, 2005/11/15, 台中(修平技術學院), pp.255-261.
  87. 劉家安, 駱士傑, 童超塵, 2004, 以MCEWMA管制圖監控自相關性製程之評估, 中國工業工程學會九十三學年度年會暨學術研討會, 2004/12/18, 台南, pp. 101-105.
  88. 童超塵, 賴建銘, 許家豐, 2004, SPC製程平均與變異數改變點之探討, 中國工業工程學會九十三學年度年會暨學術研討會, 2004/12/18, 台南, pp. 106-110.
  89. 童超塵, 張哲健, 黃資元, 2004, PID控制結合SPC之經濟性設計, 中國工業工程學會九十三學年度年會暨學術研討會, 2004/12/18, 台南, pp. 121-126.
  90. 孟美斌, 黃華邦, 童超塵, 2004, 多變量製程能力指標之探討與應用, 中國工業工程學會九十三學年度年會暨學術研討會, 2004/12/18, 台南, pp. 211-216.
  91. 廖秋焚, 童超塵, 2004, 應用平衡計分卡探討垃圾焚化廠之營運績效－以屏東縣崁頂焚化廠為例, 第一屆服務業管理與創新研討會, 2004/11/27, 澎湖, pp.111-115.
  92. 黃華邦, 陳麗婕, 童超塵, 2004, 雲林醫院服務品質滿意度調查－以骨外科病房為例, 第一屆服務業管理與創新研討會, 2004/11/27, 澎湖, pp. 16-25.
  93. Huang, H.B., L.C. Chen and C.C. Torng, 2004, Analysis and control tools assist for T2 control chart, 10th National Quality Conference of the Chinese Society for Quality, 2004/11/06, Kaohsiung, pp. 98-106.
  94. 鄭安婷, 童超塵, 2004, 建構某整流器工廠之績效評估模式, 第一屆管理知識與技術提升學術研討會(論文集), 2004/05/08, 雲林, pp. 11-18.
  95. 童超塵, 曾俊傑, 2003, 建構高階主管品質資訊系統指標之研究-以半導體封裝測試業為例, 中華民國品質學會第三十九屆年會暨第九屆全國品質管理研討會, 2003/11/08, 中壢.
  96. 林亮宗, 童超塵, 2002, 整合SPC與EPC架構下製程能力指標Cp之研究, 中華民國品質學會第三十八屆年會暨第八屆全國品質管理研討會, 2002/11/04, 台中市.
  97. 蔡佩真, 童超塵, 2001, 探討允收管制界限對於製程管制的效益, 中華民國品質學會第三十七屆年會暨第七屆全國品質管理研討會, pp. 697-703.
  98. 童超塵, 古東源, 鄭博文, 盧淵源, 1997, 台灣電力公司挑戰戴明獎之可行性分析, 邁向21世紀的品質與管理技術與應用研討會, pp. 109-121.
  99. 童超塵, 陳順興, 1996, 系統非完美的最佳維修置換政策, Proceedings of the CIIE National Conference, pp. 1140-1147.
  100. 童超塵, 郭虹纓, 1996, 非常態製程能力指標之穩健性評估, Proceedings of the CIIE National Conference, pp. 1148-1155.
  101. 童超塵, 陳筆琪, 1995, 相關性資料的製程管制方法, Proceedings of the CIIE National Conference, pp. 322-329.
  102. 童超塵, 吳岳忠, 1995, 可靠度試驗數據之分析與展現, Proceedings of the 1st R.O.C. Symposium on Reliability and Maintainability, pp. 1-4.
  103. 周昭宇, 周明正, 童超塵, 1995, 從作業流程與資訊科技之觀點探討再造工程與全面品質管理之關係, 第7屆管理教育研討會(論文集), pp. 347-352.
  104. 江香滿, 童超塵, 1995, 三態裝置系統可度分析, Proceedings of the 1st Symposium on Reliability and Maintainability, pp. 15-20.
  105. 童超塵, 郭溫良, 1994, 從人機系統的觀點探討如何提高電腦控制系統的可靠度, Proceedings of the Taipei International Quality Conference, 1994/10/01, 台北市, pp. 667-671.
  106. 王彥華, 童超塵, 1994, 預算限制下軟体可靠度分析, Proceedings of the Taipei International Quality Conference, 1994/10/01-02, 台北市, pp. 589-594.
  107. Torng, C.C., 1994, A study of multiple assignable cause models in the economic design of control charts, Proceedings of the Taipei International Quality Conference, 1994/09/01, Taipei, pp. 495-499.
  108. Torng, C.C., 1992, Economic design of statistical quality control charts, Proceedings of the CIIE National Conference, 1992/11/01, Kaohsiung, pp. 235-241.
三、專書及專書論文
  1. Torng, Chauchen, 2020, HCII 2020, Communications in Computer and Information Science, vol 1293. , Cham., A Design and Evaluation of Coefficient of Variation Control Chart, Springer, Cambridge, pp.270-278.
  2. 童超塵, 1994, 短生產週期製程之最佳化管制策略.
  3. Chau-Chen Torng, Douglas C. Montgomery and Jeffery K. Cochran, 1992, Economic Design of the EWMA Control Chart.
四、其他論著
  1. 童超塵, 2008, 應用雙次抽樣平均數管制圖監控相關性製程的經濟統計性設計.
  2. 童超塵, 2001, 探討允收管制界限對於製程管制的效益, 國科會專題研究計劃報告.
  3. 童超塵, 2000, 非常態製程能力弱度指標之研究, 國科會專題研究計劃報告.
  4. 童超塵, 2000, 考量田口損失之指數加權移動平均管制圖經濟性設計, 國科會專題研究計劃報告.
  5. 童超塵, 1999, 醫療資源需求迫切性評估暨補助模式之建立, 國科會專題研究計劃報告.
  6. 童超塵, 1998, 服務品質績效之整合性評估, 國科會專題研究計劃報告.
  7. 童超塵, 1998, 以QS-9000標準評估汽車產業之品質保證體系, 國科會專題研究計劃報告.
  8. 鄭博文、林尚平、童超塵, 1998, 台灣省衛生處推動全面品質管理計畫成效評估成果報告, 台灣省衛生處委託.
  9. 童超塵, 1997, 穩健性製程指標之評估與有效性分析, 國科會專題研究計劃報告.
  10. 童超塵、古東源、盧淵源、鄭博文, 1996, 挑戰日本戴明獎之可行性分析, 台電總公司研究計劃報告.
  11. 童超塵, 1996, 資料相關性對統計製程管制方法之敏感度分析, 國科會專題研究計畫報告.
  12. 周昭宇、古東源、童超塵、洪正芳, 1995, 應用全面品管於醫院績效管理之改善, 國科會專題研究計劃報告, pp. 40, NSC-84-2416-H-0224-003.
  13. Torng, Chau-Chen, 1994, Optimal Statistical Process Control Policy for Short Production Run, 國科會專題計畫報告.
  14. Torng, Chau-Chen, 1992, Economic Statistical Design of Variables Control Charts, Ph. D. Dissertation, Arizona State University.
  15. Chau-Chen Torng, 1988, A Study of Multiple Assignable Cause Models in the Economic Design of Control Charts, M. S. Thesis, Auburn University.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 
SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Register｜logon登入 Login 
國立雲林科技大學 版權所有 c2005 National Yunlin University of Science & Technology, All Rights Reserved.