112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢
  1. 按【查詢】按鈕：請先選擇學院→系所→教師，輸入起迄年或不輸入起迄年，再點選【查詢】即完成。
  2. 按【進階查詢】按鈕：採用組合查詢的方式。
  3. 按【匯出Word檔】按鈕：匯出教師【個人】著作資料。
搜尋條件：著作類別->全部著作 | 學院->College Of Engineering | 系所->Department of Mechanical Engineering | 教師姓名->Wang, Dau-Chung
      
         西元年   至    
汪島軍老師的論文著述

一、學術期刊論文

  1. 汪島軍, 2010, The effect of rapid thermal annealing treatment on the field-emission characteristics of nanocrystalline diamond grown on various metal/silicon substrates, Journal of Materials Science - Materials in Electronics, Vol.21, No.4, pp.385-392. (SCI, EI)
  2. 汪島軍, 2009, An study on Ni-P alloy electroforming, Journal of Materials Science and Technology. (SCI)
  3. 汪島軍, 2009, In An experimental study on electroforming of ternary Ni-Co-Mn alloy, Int. J. Nuclear Desalination, Vol.13, No.3. (SCI)
  4. 汪島軍, 2009, Improved quality polycrystalline diamond grown by two-stage microwave plasma chemical vapor deposition, New Carbon Materials, Vol.24, No.3, pp.223-229. (EI)
  5. 汪島軍, 2009, Field emission studies of amorphous carbon deposited on the Copper nanowires grown by cathodic arc plasma deposition, New Carbon Materials, Vol.24, No.2, pp.97-101. (EI)
  6. 汪島軍, 2008, Apoptosis study of the Macrophage via Near-Field Scanning Optical Microscope, Journal of Physics: Conference Series, Vol.100. (其他)(奈米薄膜/結構自組合成暨特徵檢測技術研究)
  7. 汪島軍, 2008, The effect of Au amount on size uniformity of self-assembled Au nanoparticles, Journal of Physics: Conference Series, Vol.100. (其他)(奈米薄膜/結構自組合成暨特徵檢測技術研究)
  8. 汪島軍, 2008, Effects of pre-treatment and post-annealing on the field emission property of diamond-like carbon grown on titanium/silicon substrate, New Carbon Materials, Vol.23, No.3, pp.209-215. (EI)
  9. 汪島軍, 2008, An improved electroforming process for Ni-Co-Mn deposition using synchronized electric and magnetic impulse, Eur. Phys. J. Appl. Phys., Vol.44, pp.143-148.
  10. 汪島軍, 2007, Mathematical Modeling of the Electroforming Process Utilizing Lorentz Force under Low Magnetic Induction for Dies with High Aspect Ratio, Journal of Chinese Society of Mechanical Engineers, Vol.28, No.5, pp.495-502. (SCI)
  11. 汪島軍, 2006, Size Control of the Self-Assembly Gold Nanoparticles, Journal of Medical adn Biological Engineering, Special Issue on Nano Bioengineering, 2006, Vol.26, No.3, pp.137-142. (EI)
  12. 汪島軍, 2006, The role of molar ratio on the size control of self-assembled gold nanoparticles, Journal of CSME, Special Issue, 2006, Vol.27, No.6, pp.751-756. (EI)
  13. P.F. Chang, D.C. Wang（汪島軍）, 2005, 以成果導向指標AC2004建構產學配合的課程目標、學習成効與評量回饋, Journal of Education Research, Vol. 132.
  14. Y. C. Chang, C. S. Chang, D. C. Wang（汪島軍）, M. H. Lee, T. F. Wang, M. Y. Wu, T. Y. Fu and Tien T. Tsong, 2004, Nanoscale Imaging of Bio-molecules by Controlled Carbon Nanotube Probes, Jpn. J. of Appl. Phys., Vol. 43, No. 7B. (SCI)
  15. Dau-Chung Wang（汪島軍）, Jung-Chuan Chou, Shih-Ming Wang, Po-Lun Lu, Lan-Pin Liao, 2003, Application of a Fringe Capacitive Sensor to Small-Distance Measurement, Jpn. J. of Appl. Phys., Vol. 42, pp. 5816-5820. (SCI)
  16. Y. C. Chang, D. C. Wang, C. S. Chang, and Tien T. Tsong, 2003, An easy method to adjust the angle of the carbon nanotube probe of atomic force microscope, Appl. Phys. Lett., Vol. 82, No. 20, pp. 3541-3543. (SCI)
  17. Dau-Chung Wang, Li-Yi Cheng, 2002, Design and Fabrication of MEMS-Based Fringe Capacitive Sensor, J of Science and Technology.
  18. Ying C. Huang, Yi-Fang Hung, Dau-Chung Wang, 2001, Noise Reduction in Emergency Department, J Taiwan Emerg Med, Vol. 3, No. 1.
  19. B. Regez, S.C. Max Yen, M. El-Zein, Dau-Chung Wang, 2001, Frequency Effect on the Fatigue Life of a Chopped Fiber Composite. (SCI)
  20. Dau-Chung, Wang, et al., 1989, The Robust Tracking Control of Nonlinear Systems with Uncertain Dynamics-Part II, J. Sys. Science, Vol. 20, pp. 2643-2661. (SCI)
  21. Dau-Chung, Wang, et al., 1989, The Robust Tracking Control of Nonlinear Systems with Uncertain Dynamics-Part I, J. Sys. Science, Vol. 20, pp. 2619-2641. (SCI)
二、研討會論文
  1. 汪島軍, 2008, A Study on Self-Assembly of nano-particle array, The international conference on Advances in Materials and Processing Technologies, 2008/11/02-05, Manama.
  2. 汪島軍, 2008, The relation between the length of surfactant and the space distance of self-assembly gold thin film, The 4th Vacuum and Surface Sciences Conference of Asia and Australia, 2008/10/28-31, 松江.
  3. 汪島軍, 2008, The relation between the concentration of colloidal gold solution and self-assembly thin film, The 4th Vacuum and Surface Sciences Conference of Asia and Australia, 2008/10/28-31, 松江.
  4. 汪島軍, 2008, The Study of the influence of the Au concentration for Self-Assembly gold nano-particles array, The 4th Vacuum and Surface Sciences Conference of Asia and Australia, 2008/10/28-31, 松江.
  5. 汪島軍, 2007, 奈米級邊際電容感測器之研製, 第十一屆奈米工程暨微系統技術研討會, 2007/08/30-31, 台中市,中興大學. (NSC95-2221-E-224-081)
  6. 汪島軍, 2007, Apoptosis study of the Macrophage via Near-Field Scanning Optical Microscope, IVC-17/ICSS-13 and ICN+T2007, 2007/07/01-06, 斯德哥爾摩. (NSC95-2221-E-224-081)
  7. 汪島軍, 2007, The effect of Au amount on size uniformity of self-assembled Au nanoparticles, IVC-17/ICSS-13 and ICN+T2007, 2007/07/01-06, 斯德哥爾摩. (NSC95-2221-E-224-081)
  8. 汪島軍, 2007, The Study of Self-Assembly thin film by vary size of surface Modified Nanoparticles, IVC-17/ICSS-13 and ICN+T2007, 2007/07/01-06, 斯德哥爾摩. (NSC95-2221-E-224-081)
  9. 汪島軍, 2006, The role of molar ratio on the size control of self-assembled gold nanoparticles, 2006第五屆全國精密製造研討會暨國際製造工程學會中華民國分會九十五年度年會, 2006/11/11, 高雄,國立高雄應用科技大學.
  10. 汪島軍, 2006, 使用自組合成技術製成粒徑2奈米到6奈米之金顆粒及其特性分析, 第三屆環境保護與奈米科技學術研討會, 2006/07/06, 高雄,國立中山大學.
  11. Dau-Chung Wang（汪島軍）, Shinn-Hwa Chen（陳信華）, Gen-You Chen（陳亘佑）, Chia-Liang Jan（詹嘉良）, 2006, The Study on the Effect of Mole Ratio to the Self-Assembly of Thin Film with Surface Modified Colloidal Nanoparticles, 2006 Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), 2006/06/25-28, (Marina Mandarin Hotel).
  12. 張佩芬，汪島軍，陳佳琪, 2005, 以ABET EC-2000指標建構產學配合的工程教育, 2005年第三屆創新與創造力研討會, 台北(政大創新與創造力研究中心).
  13. 汪島軍；張佩芬；林仕淳, 2005, 運用多元培育目標建立單一課程的線上學習歷程檔案, 2005年學習、教學與評量國際研討會, 台北(台灣師範大學).
  14. Dau-Chung Wang（汪島軍）, Shinn-Hwa Chen（陳信華）, Gen-You Chen（陳亘佑）, Chia-Liang Jan（詹嘉良）, 2005, Self-Assembly of Thin Film with Surface Modified Colloidal Nanoparticles, 2005薄膜與奈米科技研討會暨國科會專題計畫研究成果發表會, 南投(日月潭青年活動中心).
  15. Dau-Chung Wang（汪島軍）, Shinn-Hwa Chen（陳信華）, Gen-You Chen（陳亘佑）, Chia-Liang Jan（詹嘉良）, 2005, Self-Assembly of Surface Modified Colloidal Nanoparticles, 2005 Nano Bioengineering International Symposium, 桃園(Chung Yuan Christian University).
  16. Dau-Chung Wang（汪島軍）, Ma Tseng Shiao（馬承孝）, 2005, An Optical Approach of Surface Topography via Near-Field Scanning Optical Microscope, 2005 Nano Bioengineering International Symposium, 桃園(Chung Yuan Christian University).
  17. Chang, P.F. ; Wang, D.C (汪島軍), 2005, A Novel Approach Based on ABET Criteria to Maximize Students’ Performance Outcomes, ICEE 2005 Conference, Gliwice.
  18. Chang, P.F. & Wang, D.C.(汪島軍), 2005, The Implementation of Multiple Assessment Methods for Outcome-Based Program Accreditation Approach in Taiwan, ICEER Conference, 2005/03/01-05, Tainan.
  19. 汪島軍, 陳永益, 洪斌傑, 2004, 電容式光學尺研製, 大學發展與產學合作－大學校院學術論文發表暨研討會, 雲林(國立雲林科技大學).
  20. 汪島軍, 2004, 電容式光學尺研製, 國科會自動化學門92年度專題計畫成果發表會暨學門規劃研討會, 台北(台北科技大學).
  21. Y.C. Chang, C.S. Chang, M.Y. Wu, D.C. Wang, Tsu-Yi Fu, Tien T. Tsong, 2003, Nanoprobes for Nanostructure Imaging, 2003奈米國家型科技計畫商機探討暨成果發表會, Hsinchu.
  22. Y.C. Chang, C.S. Chang, D.C. Wang, M.Y. Wu, , Tsu-Yi Fu, Tien T. Tsong, 2003, Resolution Enhancement of Bio-materials by Carbon Nanotube Atomic Force Microscope Probe, The 11th International Colloquium on Scanning Probe Microscopy,Atagawa Heights, 2003/12/11-13, Shizuoka.
  23. Yun-Yi Huang, Dau-Chung Wang, 2002, Reliability-Based Assessment on Equipments Investment in a Production Line, The 19th National Conference on Mechanical Engineering, Fuwei.
  24. Max Yen, Dau-Chung Wang, Mohamad S. El-Zein, 2002, Life Prediction Model of a Chopped Fiber Composite under Fatigue Loading, International Symposium on Experimental Mechanics, 2002/12/28-30, Taipei.
  25. Dau-Chung Wang, et al, 2002, Design Optimization of MEMS-based Fringe Capacitive Proximity Sensor, International Symposium on Experimental Mechanics, 2002/12/28-30, Taipei.
  26. Dau-Chung Wang, Jung-Chuan Chou, Li-Yi Cheng, Shih-Ming Wang, Lan-Pin Liao, 2002, "Nano-Distance Measurement via Fringe Capacitive Sensor", The 9th International Meeting on Chemical Sensors, 2002/07/07-10, Boston.
  27. Ko-Shang Chang, Dau-Chung Wang, 2001, Diagnostic Techniques of Mechanical Systems via Noise Emission, Proceedings of The 1st Conference of Industry-University Cooperation for Engineering Technologies, Touliu.
  28. Dau-Chung Wang, Li-Yi Chern, 2001, Automation of Forming System for Cable Connectors, Proceedings of the 1st Conference of Industry-University Cooperation for Engineering Technologies, Touliu.
  29. Dau-Chung Wang, 2001, An Example in the Curriculum Development of Nano-technology, Proceedings of the International Conference on Engineering Education, Oslo.
  30. Dau-Chung Wang, Jung-Chuan Chou, Li-Yi Cheng, Shih-Ming Wang, Lan-Pin Liao, 2001, "Measurement of the Small Proximity Distance Using the Capacitance Sensor", Proceedings of the 2001 Electronics Devices and Materials Symposia (EDMS), 2001/12/12-13, Kaoshiung(National Sun Yat-Sen University), pp. 524-529.
  31. Te-Ho Wu, Dau-Chung Wang, Jai-Jen Chang, Li-Yi Chern, Zei-Wen Chen, 2000, System Performance Evaluation of the Electromagnetic Actuator for the Read/Write Head of Optical Disk, Proceedings ofthe 14th Conference on Magnetism and Magnetics Technologies,Chinese Association for Magnetic Technology, Touliu.
  32. Dau-Chung Wang, Yun-I Huang, 2000, System reliability analysis based investment evaluation of a parts-fabrication line, Proceedings of the 5th Annual International Conference on Industrial Engineering - Theory,Applications and Practice, Hsinchu.
  33. Dau-Chung Wang, Wen-Shung Chang, 2000, The Design of the Higher Education in the Vocational Education System in Taiwan, Proceedings of the International Conference on Engineering Education, Taipei.
  34. Dau-Chung Wang, Te-Ho Wu, Jai-Jen Chang, Li-Yi Chern, Zei-Wen Chen, 2000, The Development of a Non-contact Measuring System for the Measurement of Sub-micron motion, Proceedings of the 1st Cross-Strait Conference on MEMS, Tainan.
  35. Dau-Chung Wang, Gee-Shing Gern, 1999, "Modeling of Surface Roughness for MEMS", The 16th National Conference on Mechanical Engineering, Hsinchu.
  36. Dau-Chung, Wang, et al., 1997, The Noise Control Layout Design via Computer Simulation, The 14th National Conference on Mechanical Engineering, Chungli.
  37. Dau-Chung, Wang, et al., 1997, The Reliability Estimation Technique of a Pneumatic Solenoid Value, The 14thNational Conference on Mechanical Engineering, Chungli.
  38. Dau-Chung, Wang, et al., 1997, The Point Source Modeling of a Noisy Machine, The National Conference on Vibration and Acoustics, Hsinchu.
  39. Dau-Chung, Wang, et al., 1997, The Noise Prediction in a Manufacturing Environment, The 10th Symposium of the Acoustical Society of the Republic of China, Taipei.
  40. Dau-Chung, Wang, et al., 1997, The Application of Computer Simulation on the Noise Control, The 10th Symposium of the Acoustical Society of the Republic of China, Taipei.
  41. Dau-Chung, Wang, et al., 1997, Predicting the Reliability of Pneumatic Solenoid Valves by Gray Forecasting, Proc. of the 2nd R.O.C. Symp. On Reliability and Maintenance, Chungli.
  42. Dau-Chung, Wang, 1997, The Measurement of Surface Roughness of MEMS, The 1st National Conference on MEMS, Hsinchu.
  43. Dau-Chung, Wang, et al., 1996, The Prediction Mode of Noise Control, The 9th Symposium of The Acoustical Society of The Republic of China, Tainan.
  44. Dau-Chung, Wang, et al, 1995, The Active Noise Control Adaptive System, 12 th Natioal Conference on Mechanical Engineering, Jaiyi.
  45. Dau-Chung, Wang, et al., 1994, The Robust Controller via Variable Structure Control and Nonlinear Optimization Technique, 11th National Conference on Mechanical Engineering, Taichung.
  46. Dau-Chung, Wang, et al., 1994, Needs Analysis of the Manufacturing Industry in Taiwan on Mechanical Engineering Technological Skills and Knowledge, Proceedings of the 1994 International Conference on Engineering Education, Taipei.
  47. Dau-Chung, Wang, et al., 1994, Exploration of Educational Curriculum of Mechanical Engineering: A Preanalysis on the Match of Mechanical Engineering Curriculum to Industries Needs, Proceedings of the 1994 International Conference on Engineering Education, Taipei.
  48. Dau-Chung, Wang, et al., 1992, The Application of Fuzzy Control to Air Conditioning Systems, 9th National Conference on Mechanical Engineering, Kaoshiung.
  49. Dau-Chung, Wang, et al., 1989, The Robust Path Tracking Control of Robot Manipulators, 13th National Conference on Automatic Control, Taipei.
三、專書及專書論文
  1. Dau-Chung Wang(汪島軍), J.H. Ma, G.Y. Chen, S.K. Tsai, J.C. Lin, 2004, Patent Analysis of Atomic Force Microscope.
  2. Dau-Chung Wang (汪島軍), 1997, Maintenance and Manipulation Practices of Gate Systems for Farming Irrigation.
  3. Dau-Chung Wang (汪島軍), C.T. Leondes, 1992, Robust Tracking Control of Non-Linear Systems with Uncertain Dynamics.
四、其他論著
  1. Dau-Chung Wang, J.H. Ma, G.Y. Chen, S.K. Tsai, J.C. Lin, 2004, Patent Analysis of Atomic Force Microscope, Patent Analysis-Nanotechnology Series, Science and Technology Information Center,National Science Council,Taiwan,ROC..
  2. 汪島軍, 2003, 國立雲林科技大學-美國南伊利諾大學國際學術合作專題報導, 國立雲林科技大學校刊「雲聲」, No. 125.
  3. Dau-Chung, Wang, S.K. Liu, 1998, The Optimal Quantitative Measurement Approach of the Water in the Industrial Environment, Research Report to the Environmental Protection Administration, R.O.C.
  4. Dau-Chung, Wang, S.F. Huang, 1998, Studies in Maintenance and Manipulation Practices as well as Functions of Various Control Gates, Research Report to the Tsao-Kon Research Foundation of Agricultural Development, R.O.C.
  5. Dau-Chung, Wang, 1997, The Match of the Mechanical Engineering Curriculum to the Mechanical Curriculum Improvement ( part II ), Research to the national Science Council of R.O.C.
  6. Dau-Chung, Wang, 1997, A Study on Application of Failure Rate Models for Mechanical Parts, Research Report to the Chung Shan Institute of Science Technology, R.O.C.
  7. Dau-Chung, Wang, 1997, The Prediction Mode of Noise ControlIndustrial Applications, Research Report to the Institute of Occupational Safety and Health, Council of Labor Affairs,R.O.C.
  8. Dau-Chung Wang, 1997, Maintenance and Manipulation Practices of Gate Systems for Farming Irrigation, KaoShiung Irrigation Association, Taiwan,ROC..
  9. Dau-Chung, Wang, et al., 1996, A Curriculum Adjustment on the Match of Mechanical Engineering Curriculum to Industries Needs--College Level, Research Report to the National Science Council of R.O.C.
  10. Dau-Chung, Wang, 1996, The Prediction Mode of Noise Control, Research Report to the Institute of Occupational Safety and Health, Council of Labor Affairs,R.O.C.
  11. Dau-Chung, Wang, 1996, EC Type-Examination of Wood Working Machines, Research Report to the Metal Industries Research and Development Center, R.O.C.
  12. Dau-Chung, Wang, 1996, Automation of Irrigation Systems, Research Report to KaoShiung Irrigation Association, Taiwan R.O.C.
  13. Dau-Chung, Wang, 1995, The Active Noise Control Systems, Research Report to the National Science Council of R.O.C.
  14. Dau-Chung, Wang, 1995, An Analysis on the Match of Mechanical Engineering Curriculum to Industries Needs--College Level, Research Report to the National Science Council of R.O.C.
  15. Dau-Chung Wang, 1994, "The Robust Controller via Variable Structure Control and Lyapunovs Direct Method", Research Report to the National Science Council of ROC..
  16. Dau-Chung, Wang, C.T. Leondes, 1992, The Robust Tracking Control of nonlinear Systems with Uncertain Dynamics, Control and Dynamic Systems, Vol. 50, Academic Press,Inc.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 
SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Register｜logon登入 Login 
國立雲林科技大學 版權所有 c2005 National Yunlin University of Science & Technology, All Rights Reserved.