112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢
  1. 按【查詢】按鈕：請先選擇學院→系所→教師，輸入起迄年或不輸入起迄年，再點選【查詢】即完成。
  2. 按【進階查詢】按鈕：採用組合查詢的方式。
  3. 按【匯出Word檔】按鈕：匯出教師【個人】著作資料。
搜尋條件：著作類別->全部著作 | 學院->College Of Engineering | 系所->Department of Mechanical Engineering | 教師姓名->Hou Chun-Kan
      
         西元年   至    
侯春看老師的論文著述

一、學術期刊論文

  1. Chun-Kan Hou, Jian-Ming Tzeng, 2012, Influence of Heating Rate and Decarburization Temperature on the Microstructure and Magnetic Properties of Grain Oriented Electrical Steel, Materials Science Forum, Vol.706-709, pp.2622-2627. (EI)
  2. Chun-Chih Liao, Chun-Kan Hou, 2010, Effect of nitriding time on secondary recrystallization behaviors and magnetic properties of grain-oriented electrical steel, Journal of Magnetism and Magnetic Materials, Vol.322, pp.434-442. (SCI)
  3. Chun-Chih Liao and Chun-Kan Hou, 2009, Effect of Tin on the Recrystallization Behaviors and Texture of Grain Oriented Electrical Steels, Ceramic Transactions , The American Ceramic Society, Published by John Wiley & Sons, Inc., Hoboken, New Jersey, U.S.A., Vol.200, pp.231-242. (其他)
  4. Chun-Kan Hou, Tong- Han Lee and Chun-Chih Liao, 2009, EFFECT OF TIN ON THE TEXTURE OF NONORIENTED ELECTRICAL STEELS, Ceramic Transactions , The American Ceramic Society, Published by John Wiley & Sons, Inc., Hoboken, New Jersey, U.S.A., Vol.200, pp.173-182. (其他)
  5. Chun-Kan Hou, Chang-Chia Liu, 2009, EFFECT OF COLD ROLLED REDUCTION ON THE TEXTURE AND PLASTIC STRAIN RATIO OF 2205 DUPLEX STAINLESS STEEL, Ceramic Transactions Vol. 200,The American Ceramic Society, Published by John Wiley & Sons, Inc., Hoboken, New Jersey, U.S.A., Vol.200, pp.183-192. (其他)
  6. Chun-Kan Hou and Chun-Chih Liao, 2008, Effect of Cerium Content on the Magnetic Properties of Non-oriented Electrical Steels, ISIJ International, Vol.48, No.4, pp.531-539. (SCI, EI)(稀土元素對非方向性矽鋼片磁特性效應之研究, NSC89-2216-E-224-010)
  7. Chun-Kan Hou, 2008, Effects of Sulfur Content and Slab Reheating Temperature on the Magnetic Properties of Fully-Processed Nonoriented Electrical Steels, Journal of Magnetism and Magnetic Materials, Vol.320, No.6, pp.1115-1122. (SCI)
  8. 侯春看, 廖俊智, 李東翰, 2007, 錫對非方向性電氣鋼片優選方位與磁特性效應之研究, 工程科技通訊, Vol.92, pp.29-35. (EI)
  9. T.J. Chen, A.C. Cabrera, C.H. Chang, K. A. Liao, C.K. Hou and T.H. Wu, 2006, The magneic characteristics of perpendicular magneic tunnel junction with MgO and Al-O oxidation layers in various thickness, J.Magnetism and Magnetic Materials, Vol.304, No. 3, e291-293. (SCI)
  10. S.C. Li, T.J. Chen, C.H. Chang, K.A. Liao, C.K. Hou, T.H. Wu, 2006, Effects of MgO tunnel barrier thickness on magnetohysteresis in perpendicularly magnetized magnetic tunnel junctions of GdFeCo/FeCo/Mgo/FeCo/TbFe/Co, Jour. Applied Physics, Vol.99, No.10, 08T310. (SCI)
  11. T.J.Chen, A.C. Cabrera, C.H. Chang, K.A. Liao, C.K. Hou and T.H. Wu, 2006, Comparison of the interfacial structure between MaO and Al-O oxidation layers for perpendicular magnetic tunnel juction, J. Applied Physics, Vol. 99, No. 10, 08T313. (SCI)
  12. Cho-Liang Tsai, Yun Du, Yi-Shiun Tsai, Chun-Kan Hou, 2001, Penumatic behavior of woven glass/epoxy laminates, Composites Science and Technology, Vol. 61, pp. 2109-2116. (SCI)
  13. 張文雄、游萬來、侯春看、曾世昌、連萬福、林尚平、廖年淼, 2000, 二技推薦甄選入學方式之研究, 教育研究資訊, Vol. 8, No. 1, pp. 55-77. (TSSCI)
  14. C. K. Hou and Y. W. Hwang, 1997, Effect of Composition and Anealing Temperature on the Recrystallization Behaviors of Grain Oriented Electrical Steels, Chinese Journal of Materials Science, Vol. 29, No. 2, pp. 140-145.
  15. Chun-Kan Hou and Yann-Wen Hwang, 1996, Comparison of the Mechanical Properties and Wear Resistance between Two Oil-hardening Tool Steels, Journal Iron and Steel Institute of Japan(ISIJ),lnternational, Vol. 36, No. 2, pp. 246-254. (SCI, EI)
  16. Chun-Kan Hou, 1996, The Effects of Grain Size on the Magnetic Properties of Fully Processed,Continuous-Annealing Low-Carbon Electrical Steels, IEEE Transactions on Magnetics, Vol. 32, No. 2, pp. 471-477. (SCI)
  17. Chun-Kan Hou, 1996, Effect of Silicon on the Loss Separation and Permeability of Lamination Steels, Journal of Magnetism and Magnetic Materials, Vol. 162, pp. 280-290. (SCI)
  18. Chun-Kan Hou, 1996, Effect of Hot Band Temper Rolling Strain on the Magnetic Properties of Low-Carbon Electrical Steels, Journal of Magnetism and Magnetic Materials, Vol. 162, pp. 291-230. (SCI)
  19. Chun-Kan Hou, 1996, Effect of Hot Band Annealing Temperature on the Magnetic Properties of Low-Carbon Electrical Steels, Journal Iron and Steel Institute of Japan (ISIJ),lnternational, Vol. 36, No. 5, pp. 563-571. (SCI, EI)
  20. Chun-Kan Hou, Y. W. Hwang, K. C. Ou, and W. J. Wang, 1995, Effect of Austenitizing Temperature on the Hardenability of Oil Quench Tool Steels, Chinese Journal of materials Science, Vol. 27, No. l, pp. 35-43.
  21. Chun-Kan Hou and Sanboh Lee, 1994, Effect of Rolling Strain on the Loss Separation and Permeability of Lamination Steels, IEEE Transaction on Magnetics, Vol. 30, No. 2, pp. 212-216. (SCI)
  22. F. S. Shyr, C. K. Hou, C. H. Liu, C. C. Yang, and C. F. Chan, 1992, Isothermal Crystallization of Co-based Amorphous Alloy, Chinese Journal of Materials Science, Vol. 24, No. 2, pp. 94-99. (SCI)
  23. C. K. Hou, C. T. Hu, and Sanboh Lee, 1992, The Effect of Phosphorus on the Core Loss of Lamination Steels, Journal of Magnetism and Magnetic Materials, Vol. l09, pp. 7-12. (SCI)
  24. Chun-Kan Hou, Chen-Ti Hu, and Sanboh Lee, 1991, The Effect of Aluminum on the Magnetic Properties of Lamination Steels, IEEE Transactions on Magnetics, Vol. 27, No. 5, pp. 4305-4309. (SCI)
  25. C. K. Hou and P. C. Wang, 1991, Effect of Composition and Process Variables on Magnetic Flux Density of Low carbon electrical Steels, Chinese Journal of Materials Science, Vol. 23, No. 3, pp. 217-224.
  26. C. K. Hou, 1991, Isothermal Annealing of 0. 5% Si Electrical steels, China Steel Technical Report, No. 5, pp. l8-24.
  27. H. Y. Pai, C. H. Lam, S. U. Jen, and C. K. Hou, 1990, Effects of Annealing on magnetic properties of Fe78B13Si9, Journal of Material Science, Vol. 25, pp. 3159-3161. (SCI)
  28. C. K. Hou, C. T. Hu, and Sanboh Lee, 1990, The Effect of Titanium and Niobium on Degradation of Magnetic Properties of Lamination Steels, Journal of Magnetism and Magnetic Materials, Vol. 87, pp. 44-50. (SCI)
  29. C. K. Hou, C. T. Hu, and Sanboh Lee, 1990, Effect of Residual Aluminium on the Microstructure and Magnetic Properties of Low Carbon Electrical Steels, Journal of Materials Science and Engineering, Vol. A125, pp. 241-247. (SCI)
  30. C. K. Hou and P. C. Wang, 1990, Effect of Composition and Process Variables on Core Loss and Hardness of Low Carbon Electrical steels, Journal of Magnetism and Magnetic Materials, Vol. 92, pp. 109-115. (SCI)
  31. S. U. Jen, Y. D. Yao, S. M Yang, S. T. Lin, and C. K. Hou, 1987, High temperature Properties of the Amorphouse Fe72Cr8B14Si6, Chinese Journal of Physics, Vol. 25, pp. 512-520.
  32. D. Y. Chiang and C. K. Hou, 1987, Factors Affecting the Magnetic Properties of Nonoriented Electrical Steels, Chinese Journal of Material Science, Vol. l9, pp. 222-225.
二、研討會論文
  1. Chun-Kan Hou and Deng-Yu Yang, 2015, Effect of Secondary Recrystallization Temperature on Magnetic Properties of Grain Oriented Electrical Steel, CAMP-ISIJ 第169回春計講演大會, 2015/03/18-20, 日本鐵鋼協會, 東京、東京大學, p.354.
  2. Chun-Kan Hou and Jian-Hong Ye, 2014, Effeect of Hot Band Annealing on Magnetic Properties of Grain Oriented Electrical Steel, CAMP-ISIJ 日本鐵鋼協會第167回春季講演大會, 2014/03/21-23, 日本鐵鋼協會, 東京工業大學，東京, pp.471.
  3. Chun-Kan Hou and Ruei-Cang Hu, 2013, Effect of Hot Band Decarburization Annealing on Magnetic Properties of Grain Oriented Electrical Steel, 日本鐵鋼協會第165回春季講演大學 (CAMP-ISIJ Materials Processing ), 2013/03/27-29, 日本鐵鋼協會, 東京，東京電機大學, P.338.
  4. 胡瑞滄, 侯春看, 2012, 熱軋板脫碳退火對方向性電磁鋼片二次再結晶行為之效應研究, 2012中國材料科學學會年會暨研討會論文集, 2012/11/23-24, 中國材料科學學會, 雲林縣，虎尾科技大學, pp.2843-2846.
  5. 侯春看, 陳穎賢, 2012, 塗膜粉末對方向性電磁鋼片二次再結晶行為之影響, 2012中國材料科學學會年會暨研討會論文集, 2012/11/23-24, 中國材料科學學會, 雲林縣，虎尾科技大會, pp.2879-2882.
  6. Chien-Chih Chen and Chun-Kan Hou, 2011, Effect of hot band annealing process on the secondary recrystallization behaviors of grain oriented electrical steels,, The 12th IUMRS international conference in Asia, 2011/09/19-22, Chinese Materials Society, Taipei, Nankang Exhibition Center, Taiwan, pp.10-14.
  7. Chun-Kan Hou, Jian-Ming Tzeng, 2011, Influence of Heating Rate on the Magnetic Properties of Grain Oriented Electrical Steel, International Conference on Processing & Manufacturing of Advanced Materials, 2011/08/01-05, THERMEC’2011, Quebec City, CANADA, TEXT 2-5.
  8. 黃奎鈞, 陳建志, 侯春看, 2010, 扁鋼胚在加熱溫度對方向性電磁鋼片在結晶行為與磁特性效應之研究, 中國材料科學學會2010論文研討會, 2010/11/19-20, 中國材料科學學會, 高雄市，義守大學, 09-0287.
  9. 張晉瑋, 陳建志, 侯春看, 2010, 一次退火製程對方向性電磁鋼片再結晶行為之研究, 2010年台灣磁性技術協會暨第二十二屆磁學與磁性技術研討會, 2010/06/23-25, 台灣磁性技術協會, 南投縣國立中興大學惠蓀林場, E01.
  10. Chien-Chih Chen and Chun-Kan Hou, 2010, Effect of Aluminum Content on the Secondary Recrystallization Behaviors of Grain Oriented Electrical Steels, 日本鐵鋼協會第159回論文研討會 (CAMP-ISIJ-2010), 2010/03/28-30, 日本鐵鋼協會, 筑波縣,國立筑波大學, S186.
  11. 蕭聖耀, 侯春看, 2009, 退火條件對2205雙相不銹鋼機械性質影響之研究, 2009中國材料科學學會年會論文集, 2009/11/26-28, 中國材料科學學會, 花蓮東華大學, 09-0627.
  12. 阮呈皓, 侯春看, 2009, 塗膜對方向性電磁鋼片二次再結晶行為效應之研究, 2009中國材料科學學會年會論文集, 2009/11/26-28, 中國材料科學學會, 花蓮東華大學, 09-0357.
  13. 黃奎鈞, 侯春看, 2009, 高溫加工條件對2205雙相不銹鋼顯微組織影響之研究, 2009中國材料科學學會年會論文集, 2009/11/26-28, 中國材料科學學會, 花蓮東華大學, 09-0249.
  14. 廖明泉, 侯春看, 2009, 時效熱處理對15-5PH不銹鋼機械性質及微觀組織影響之研究, 2009中國材料科學學會年會論文集, 2009/11/26-28, 中國材料科學學會, 花蓮東華大學, 09-0342.
  15. 張晉瑋, 侯春看, 2009, 錫含量對中高真空退火非方向性電磁鋼片磁特性效應之研究, 2009年磁性技術協會年會暨第21屆磁性技術研討會及第二屆兩岸自旋電子學及磁性技術研討會, 2009/06/24-26, 台灣磁性技術協會, 高雄市中山大學, pp.MP-13.
  16. 侯春看, 2009, Effect of Tin content on the Secondary Recrystallization Behaviors of Grain Oriented Electrical Steels, ISIJ第157回春季講演大會(CAMP-ISIJ vol.22,2009), 2009/03/28-30, 日本鐵鋼協會, 東京,東京工業大學, p.519. (錫對方向性電氣鋼片磁特性效應影響之研究)
  17. 廖明泉, 侯春看, 關評鴻, 2008, 時效熱處理對GTD450不銹鋼機械性質及微觀組織影響之研究, 2008中國材料科學學會年會研討會, 2008/11/21-22, 台北市, pp.P08-019.
  18. 張晉瑋, 侯春看, 程科維, 朱惠君, 楊雅茹, 陳香樺, 2008, 時效處理對含錫非方向性電氣鋼片優選方位效應之研究, 2008中國材料科學學會年會研討會, 2008/11/21-22, 台北市, pp.P08-021.
  19. *Chun-Kan Hou, Chin-Wei Chang, Ya-Ru Yang, Huej-Jiun Ju, Shiang-Hua Chen, 2008, Effect of Hot Band Segregation Annealing on the Texture Development of Nonoriented Electrical Steels, Taiwan 2008 International Steel Technologies Symposium, 2008/11/02-04, Kaohsiung, PA24.
  20. Chun-Kan Hou, Tong- Han Lee and Chun-Chih Liao, 2008, EFFECT OF TIN ON THE TEXTURE OF NONORIENTED ELECTRICAL STEELS, 15 TH International Conference of Textures of Materials, 2008/06/01-05, Pittsburg, Carnegie Mellon University.
  21. Chun-Kan Hou and Chang-Chia Liu, 2008, EFFECT OF COLD ROLLED REDUCTION ON THE TEXTURE AND PLASTIC STRAIN RATIO OF 2205 DUPLEX STAINLESS STEEL, 15TH International Conference of Textures of Materials, 2008/06/01-05, Pittsburg, Carnegie Mellon University.
  22. Chun-Chih Liao and Chun-Kan Hou, 2008, Effect of Tin on the Recrystallization Behaviors and Texture of Grain Oriented Electrical Steels, 15 Th International Conference of Texture of Materials, 2008/06/01-05, Pittsburg.
  23. Chun-Chih Liao and Chun-Kan Hou, 2008, Effect of Tin Content on Magnetic Properties and Recrystallization Behaviors of Grain Oriented Electrical Steels, 2008 TMS 137th Annual Meeting Supplemental Proceeding, Volume 3., 2008/03/09-13, New Orleance, Louisiana, pp.49-54.
  24. 廖俊智, 侯春看, 2007, 錫對方向性電氣鋼片再結晶行為及磁特性之影響, 2007中國材料科學學會研討會論文集, 2007/11/16-17, 新竹市, P08-113.
  25. 蔡豐澤, 侯春看, 2007, 鋁含量對AISI 410不銹鋼機械性質之影響, 2007中國材料科學學會研討會論文集, 2007/11/16-17, 新竹市, P08-111.
  26. 劉長嘉, 侯春看, 2007, 冷軋退火條件對2205雙相不銹鋼冷軋鋼片機械性質效應之研究, 2007中國材料科學學會研討會論文集, 2007/11/16-17, 新竹市, P08-106.
  27. 李東翰, 侯春看, 廖俊智, 2007, 錫對非方向性電氣鋼片優選方位效應之研究, 2007年中國材料科學學會研討會論文集, 2007/11/16-17, 新竹市, P08-071.
  28. 廖士文, 廖俊智, 侯春看, 2007, 熱軋板退火條件對添加釩方向性矽鋼片析出物與優選方位之研究, 2007年中國材料科學研討會論文集, 2007/11/16-17, 新竹市, P08-105.
  29. Chun-Chih Liao and Chun-Kan Hou, 2007, Effect of Nitriding Process on the Recrysatllization Behaviors and Magnetic Properties of Grain Oriented Electrical Steel, 日本鐵鋼協會講演論文集第154回秋季講演大會, 2007/09/19-21, 岐阜市, p.1305.
  30. 廖士文, 廖俊智, 侯春看, 2007, 熱軋板退火條件對添加釩方向性矽鋼片二次再結晶行為之研究, 第十九屆磁學與磁性技術研討會, 2007/07/29-2007/08/01, 雲科大, MEP-3.
  31. 廖俊智, 侯春看, 2007, 滲氮製程對方向性電氣鋼片磁特性與二次再結晶行為之研究, 第十九屆磁學與磁性技術研討會, 2007/07/29-2007/08/01, 雲科大, MEP-4.
  32. 侯春看, 李東翰, 廖俊智, 2007, 錫對非方向性電氣鋼片優選方位與磁特性效應之研究, 第十九屆磁學與磁性技術研討會, 2007/07/29-2007/08/01, 雲科大, MEP-2.
  33. 邱敬欣, 侯春看, 2006, 熱軋板退火溫度對2205雙相不銹鋼之冷軋鋼片機械性質效應之研究, 中國機械工程學會第23屆全國學術研討會, 2006/11/24-25, 崑山科技大學，永康，臺南, pp.D1-006.
  34. 侯春看, 侯文星, 2005, 滲氫處理及溫間塑性加工對Ti-6Al-4V alpha 相晶粒細化及加工特性影響之研究, 2005模具技術與論文發表會(論文集), 2005/07/23, 台北市, pp. 237-243.
  35. Wun-Sin Hou, Chun-Kan Hou, 2004, The research of Ti-6Al-4V protium treatment, The 2004 Annual Conference of the Chinese Society For Material Science(PA2-042), 2004/11/17-18, 新竹(新竹工研院), pp.36.
  36. Wun-Sin Hou, Chun-Kan Hou, 2004, Effect of Annealing Condition on the Hydride Precipitation and Equiaxed Grain Formation of Ti-6Al-4V-xHAlloy, The 2004 Annual Conference of the Chinese Society For Material Science(PA2-041), 2004/11/17-18, 新竹(新竹工研院), pp.36.
  37. Shun-Qu Chang, Chun-Kan Hou, 2004, Effect of Cold Rolling and Aluminum Content on the High Temperature Behaviors of Grain oriented Electrical Steels, The 2004 Annual Conference of the Chinese Society For Material Science(PA1-022), 2004/11/17-18, 新竹(新竹工研院), pp.11.
  38. Jiung-Yue Tien, Chun-Kan Hou, 2004, Effect of Cold Rolling and Sulfur Content on the High Temperature Annealing Behaviors of Grain Oriented Electrical Steels, The 2004 Annual Conference of the Chinese Society For Material Science(PA1-023), 2004/11/17-18, 新竹(新竹工研院), pp.12.
  39. 侯春看、廖俊智, 2002, 稀土元素對非方向性電氣鋼片磁特性效應之研究, 第二屆海峽兩岸清華大學先進材料研討會(論文集), 新竹(清華大學), pp.204-208.
  40. 侯春看、黃國峰, 2000, 冷軋中間退火溫度對極低碳方向性電磁鋼片磁特性效應之研究, 中國材料科學學會89年年會(論文集)(鋼鐵材料類,A-32), 高雄.
  41. 侯春看, 蔡美萍, 2000, 二次再結晶退火溫度對極低碳方向性電氣鋼片磁特性效應之研究, 中華民國第14屆磁學與磁性技術研討會(論文集), pp. 112-116.
  42. 林昆宗, 侯春看, 2000, 熱完軋條件與退火對非方向性電氣鋼片磁特性效應之研究, 中華民國第14屆磁學與磁性技術研討會(論文集), pp. 117-121.
  43. 侯春看, 蔡美萍, 1999, 薄片鑄造鋁合金優選方為之研究, 中國材料科學學會88年年會(論文集)(一般研討會類), 新竹(工業技術研究院).
  44. 侯春看, 林君純, 1999, 恆溫退火對薄胚鑄造鋁合金冷軋片之機械性質效應研究, 中國材料科學學會88年年會(論文集)(一般研討會類), 新竹(工業技術研究院).
  45. 侯春看, 武世乙, 1998, SCM42C含鉛低合金快削鋼高溫機械性質, 中國材料科學學會87年年會(論文集)(鋼鐵材料與製程類), 台北(大同工學院), pp. 119-122.
  46. 侯春看, 林昆宗, 黃國峰, 1998, 再結晶退火對山A105C薄片鑄造鋁合金機械性質與優選方位效應之研究, 中國材料科學學會87年年會(論文集)(一般研討會類), 台北(大同工學院), pp. 167-170.
  47. L. Chang, Y. S. Hwang, and C. K. Hou, 1996, Effect of Second Phase Particles on Recrystallization and Subsequent Grain Growth in Cold-Rolled Electrical Steels, The 37th Mechanical Working and Steel Processing Conference, Hamilton,Ontario, pp. 997-1003.
  48. C. K. Hou and Y. W. Hwang, 1996, Effect of Composition and Annealing Temperature on the Secondary Recrystallization of Oriented Electrical Steels, Proceedings of The 1996 Annual Conference of The Chinese Society for Materials Science, Hsinchu, pp. 288-291.
  49. C. K. Hou and Y. W, Hwang, 1996, Effect of Reheating Temperature on the Secondary Recrystallization of Oriented Electrical Steels, Proceedings of The 11TH Conference on Magnetism & Magnetism & Magnetic Technologies, pp. 81-89.
  50. C. K. Hou and W. J. Wang, 1996, High Temperature Mechanical Properties of Pb-bearing Free Cutting Steels ., Proceedings of The 1996 Annual Conference of The Chinese Society for Materials Science, Hsinchu, pp. 148-151.
  51. 侯春看, 龔傳智, 李俊慶, 駱偉全, 1994, 熱軋板退火對電氣鋼片磁特性效應之研究, 第9屆全國技術及教育研討會(論文集)(工業類1), pp. 21-28.
  52. C. K. Hou, Y. W. Hwang, K. C. Ou and W. J. Wang, 1994, Effects of Austenizing Temperature on the Hardenablity of Oil Quench Tool Steels, Proceeding of The 1994 Annual Conference of The Chinese Society for Materials Science, Kaohsiung, pp. 458-459.
  53. C. K. Hou, J. C. Lee, W. C. Luoh, and C. J. Gong, 1994, Effect of Cold Rolled Reduction on Magnetic Properties of Electrical Steel, Proceedings of The 1994 Annual Conference of The Chineshe Chinese Society for Materials Science, Kaohsiung, pp. 458-459.
  54. C. K. Hou, G. T. Lee, and J. T. Tzeng, 1994, Effect of Hot Band Annealing Temperature on the Magnetic Properities of Nonoriented Electrical Steels, Proceedings of The 9th Conference on Magnetism & Magnetic Technologies, Tao-yuan, pp. 81-89.
  55. C. K. Hou, 1994, Effect of Strain on the Magnetic Properties of Electrical Steel, Proceedings of The 1994 Annual Conference of The Chinese Society for Materials Science, Kaohsiung, pp. 572-573.
  56. F. S. Shyr, C. K. Hou, C. H. Liu. C. C. Yang, and C. F. Chan, 1992, Thermal Stability of Co-based Amorphous Alloy, Proceedings of The 1992 Annual Conference of The Chinese Society for Materials Science, Taipei, pp. l36-137.
  57. C. K. Hou, 1992, Effect of Annealing Condition on the Core Loss of 0. 5%Si Electrical Steel, Proceedings of The 1992 Annual Conference of The Chinese Society for Materials Science, Taipei, pp. l8-19.
  58. Y. S. Huang, H. C. Chen and C. K. Hou, 1991, Effects of Microstructure in Hot Band on Deep Drawability of Niobium-Added Extra Low Carbon Cold-Rolled Sheet Steel, Proceedings of The 1991 Annual Conference of The Chinese Society for Materials Science, Tainan, pp. 86-87.
  59. H. C. Chen, Y. S. Huang and C. K. Hou, 1990, Factors Affect the Mechanical Properties of Nb-Added Extra Low Carbon Steel, Proceedings of The 1990 Annual Conference of The Chinese Society for Materials Science, Hsinchu, pp. 243-246.
  60. C. K. Hou, and P. C. Wang, 1990, Factors Affect Flux Density of Electrical Steels, Proceedings of The 1990 Annual Conference of The Chinese Society for Materials Science, Hsinchu, pp. 567-570.
  61. C. K. Hou, 1990, Effects of Process Variables on Magnetic Properties of Low Carbon Steels, Proceedings of The 1990 Annual Conference of The Chinese Society for Materials Science, Hsinchu, pp. ll89-1191.
  62. C. K. Hou, 1990, Interphase Precipitate of Titanium Bearing Low Carbon Steels, Proceedings of The 1990 Annual Conference of The Chinese Society for Materials Science, Hsinchu, pp. 289-293.
  63. C. K. Hou, 1990, Effect of Texture on Earing of AA3004 Aluminum Alloy Steels, Proceedings of The 1990 Annual Conference Of The Chinese Society for Materials Science, Hsinchu, pp. l43-149.
  64. C. K. Hou, C. T. Hu, and S. Lee, 1989, The Microstructure Change of Low Carbon Electrical Steels by Residual Aluminum, Proceeding on Electron Microscopy Society of American, San Antonio,Texas, pp. 286-287.
三、技術報告
  1. 蔡明欽; 侯春看; 葉建宏：林煒棠, 2015, 薄帶磁性量測裝置 (發明專利TW I 470255B, 中鋼公司. (執行期間：20101年1月至2013年月)
  2. 陳孟濰, 侯春看, 2014, 添加碳及鋁含量對Fe-Si-B非晶質合金薄帶之效應及影響, 中國鋼鐵公司. (執行期間：2012年1月1日-2013年12月31日)
  3. 吳妤嬋, 侯春看, 2014, 硼含量對Fe-Si-B 非晶質合金薄帶磁特性影響, 中國鋼鐵公司. (執行期間：2012年1月1日至2013年12月31日)
四、其他論著
  1. 劉長嘉, 侯春看, 2007, 2205雙相不銹鋼之高溫機械性質及冷軋退火條件對機械性質效應之研究.
  2. 李東翰, 侯春看, 2007, 錫對非方向性電氣鋼片優選方位與磁特性效應之研究.
  3. 廖士文, 侯春看, 2007, 熱軋板退火條件對添加釩方向性矽鋼片二次再結晶行為之研究.
  4. 蔡豐澤, 侯春看, 2007, 鋁含量對AISI 410 不銹鋼機械性質之影響.
  5. 邱敬欣, 侯春看, 2006, 熱軋板退火溫度對2205雙相不銹鋼之優選方位與機械性質效應之研究.
  6. 陳咨融, 侯春看, 吳德和, 2006, 穿隧式磁阻結構製備與磁特性之研究.
  7. 黃慶宏, 侯春看, 2006, 氮化製程對添加釩之方向性電磁鋼片再結晶行為之研究.
  8. 黃炳睿, 侯春看, 2006, 製程變數對Ti-6Al-4V-xH鈦合金中溫機械性質及晶粒細化之研究.
  9. 張永岳, 侯春看, 2005, 氮化製程對極低碳及低碳方向性電磁鋼片再結晶行為之研究.
  10. 邱佩琪, 侯春看, 2005, 純元素靶濺鍍之釹-鐵-硼薄膜結構與磁特性之研究.
  11. 張順曲、侯春看, 2004, 製程變數對於高鋁方向性電磁鋼片之二次再結晶行為研究, 國立雲林科技大學機械工程技術研究所.
  12. 侯文星，侯春看, 2004, 滲氫處理及溫間塑性加工製程對Ti-6Al-4Vα相晶粒細化及加工特性影響之研究, 國立雲林科技大學機械工程技術研究所.
  13. 田炯岳、侯春看, 2004, 製程變數對高鋁與硫化錳複合添加方向性電磁鋼片二次再結晶行為之研究, 國立雲林科技大學機械工程技術研究所.
  14. 菙志宏、侯春看, 2003, 高鋁與硫化錳複合添加方向性電磁鋼片再結晶行為之研究, 國立雲林科技大學機械工程技術研究所.
  15. 陳緯銘、侯春看, 2003, 高鋁方向性電氣鋼片再結晶行為之研究, 國立雲林科技大學機械工程技術研究所.
  16. 廖俊智、侯春看, 2002, 稀土元素對非方向性電氣鋼片磁特性效應之研究, 國立雲林科技大學機械工程技術研究所.
  17. 黃國峰、侯春看, 2001, 碳含量對添加MnS方向性電磁鋼片效應之研究, 國立雲林科技大學機械工程技術研究所.
  18. 林君純、侯春看, 2001, 介在物對方向性電磁鋼片二次再結晶優選方位與微觀組織效應之研究, 國立雲林科技大學機械工程技術研究所.
  19. 蔡美萍，侯春看, 2000, 碳含量對MnS與AlN複合添加方向性電磁鋼片效應之研究, 國立雲林科技大學機械工程技術研究所.
  20. 林昆宗、侯春看, 2000, 熱完軋條件與退火對非方向性電磁鋼片磁特性效應之研究, 國立雲林科技大學機械工程技術研究所.
  21. 王文杰，侯春看, 1998, 方向性電氣鋼片之介在物溶解度積之研究, 國立雲林科技大學機械工程技術研究所.
  22. 武世乙、侯春看, 1997, SCM420含鉛快削鉻鉬低合金鋼高溫機械性質之研究, 國立雲林科技大學機械工程技術研究所.
  23. 黃彥文，侯春看, 1996, 製程變數對方向性矽鋼片二次再結晶效應之研究, 國立雲林科技大學機械工程技術研究所.
  24. 林國陞、侯春看, 1995, 製程變數對M2高速鋼破壞韌性影響之研究, 國立雲林科技大學機械工程技術研究所.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 
SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Register｜logon登入 Login 
國立雲林科技大學 版權所有 c2005 National Yunlin University of Science & Technology, All Rights Reserved.