一、學術期刊論文

1. Syuan-Cheng Chang, Chung-Ping Chang, Yung-cheng Wang, Chi-Chieh Chu, 2023, Developing an Interferogram-Based Module with Machine Learning for Maintaining Leveling of Glass Substrates, Machines, Vol.11, No.6, pp. 668. (SCI)(基於相移式Fabry-Perot干涉儀之自動檢測儀器研發(II))
2. Syuan-Cheng Chang, Chung-Ping Chang*, Yung-Cheng Wang, Chi-Chieh Chu, 2023, Leveling Maintenance Mechanism by Using the Fabry-Perot Interferometer with Machine Learning Technology, 268 TECHNICAL JOURNAL, Vol. 17, No.2, pp.268-272. (其他)
3. Cung-Ping Chang, Syuan-Cheng Chang, Yung-Cheng Wang and Pin-Yi He, 2023, A Novel Analog Interpolation Method for Heterodyne Laser Interferometer, micromachines, Vol.14, No.3, pp.696-708. (SCI)(基於相移式Fabry-Perot干涉儀之自動檢測儀器研發(II))
4. Syuan-Cheng Chang, Chung-Ping Chang, Yung-Cheng Wang, 2022, Linear Displacement and Straightness Measurement by Fabry-Perot interferometer Integrated with an Optoelectronic Module, Tehnički Glasnik (Technical Journal), Vol.16, No.3, pp.420-425. (其他)
5. Chung-Ping Chang, Tsung-Chun Tu, Siang-Ruei Huang, Yung-Cheng Wang and Syuan-Cheng Chang 2, 2021, Development of the Heterodyne Laser Encoder System for the X–Y Positioning Stage, Sensors, Vol.21, pp.5775. (SCI)
6. Yi-Chieh Shih, Pi-Cheng Tung, Yung-Cheng Wang, Lih-Horng Shyu and Eberhard Manske, 2020, Linear Displacement Calibration System Integrated with a Novel Auto-Alignment Module for Optical Axes, sensors, Vol.20, No.9, pp.2462. (SCI)
7. Chung-Ping Chang, Yi-Chieh Shih, Syuan-Cheng Chang, Yung-Cheng Wang, 2019, Laser encoder system for X-Y positioning stage, Mechatronics, Vol.63, pp.102274. (SCI)
8. Hung-Ta Shih, Yung-Cheng Wang, Lih-Horng Shyu, Pi-Cheng Tung, Chung-Ping Chang, Wen-Yuh Jywe and Jia-Hong Chen, 2018, Automatic calibration system for micro-displacement devices, Measurement Science and Technology, Vol.29, No.8, pp.084003. (SCI)
9. Lih-Horng Shyu, Yung-Cheng Wang, Chung-Ping Chang, Hung-Ta Shih, Eberhard Manske, 2016, A signal interpolation method for Fabry–Perot interferometer utilized in mechanical vibration measurement, Measurement, Vol.92, pp.83-88. (SCI)(機臺線性軸或高精密設備校驗之多重干涉式位移量測儀器開發, 104-1108)
10. Yung-Cheng Wang, Lih-Horng Shyu, Chung-Ping Chang, Ming-Li Li, Zao-Sheng Liu, 2016, In-situ dimensional measurement system for overlapped rubber layers, Optical and Quantum Electronics, Vol.48, No.2, pp.10.1007/s11082-01. (SCI)
11. Yung-Cheng Wang, Dau-Chung Wang and Tsan-Chu Lin, 2014, Using Focused Electron Beams to Drill Straight Nanopores on a Membrane, International Journal of Automation and Smart Technology, Vol.4, No.3, pp.157-162. (其他)
12. Yung-Cheng Wang, Lih-Horng Shyu, Eberhard Manske, Chung-Ping Chang, and Shih-Syun Lin, 2014, Automatic Calibration System for Precision Angle Measurement Devices, International Journal of Automation and Smart Technology, Vol.4, No.3, pp.163-167. (其他)(NSC 99-2815-C-224-004-E)
13. Yung-Cheng Wang & Chi-Hsiang Chen & Bean-Yin Lee, 2014, Analysis model of parameters affecting cutting performance, International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-0. (SCI)
14. 王永成, 徐力弘, 張中平, 2013, 應用於高精密振動量測之共光程干涉儀, 臺灣奈米會刊, No.35, pp.27-35. (其他)(具折疊共振腔之新型干涉位移量測儀研製)
15. Chen Chi-Hsiang, Wang Yung-Cheng, Lee Bean-Yin, 2013, The optimal design of micro end mill for milling SKD61 tool steel, The International Journal of Advanced Manufacturing Technology, Vol.68, No.1-4, pp.165-173. (SCI)
16. Tsan-Chu Lin, Y.C. Wang, Zhen Wang, Shou-Yang Wang and Dau-Chung Wang 2, e, 2013, A Straight Nanopore Drilling by Transmission Electron Microscope, Applied Mechanics and Materials, Vol.395-396, pp.179-183. (EI)
17. Chung-Ping Chang, Pi-Cheng Tung, Lih-Horng Shyu, Yung-Cheng Wang, Eberhard Manske, 2013, Fabry-Perot displacement interferometer for the measuring range up to 100 mm, Measurement, Vol.46, pp.4094-4099. (SCI)(具折疊共振腔之新型干涉位移量測儀研製, NSC 101-2221-E-224-047-)
18. Chung-Ping Chang, Pi-Cheng Tung, Lih-Horng Shyu, Yung-Cheng Wang and Eberhard Manske4, 2013, Multi-interferometric displacement measurement system with variable measurement mirrors, APPLIED OPTICS, Vol. 52, No. 17, pp.3902-3909. (SCI)(具折疊共振腔之新型干涉位移量測儀研製)
19. Chung-Ping Chang, Pi-Cheng Tung, Lih-Horng Shyu, Yung-Cheng Wang, and Eberhard Manske, 2013, Modified Fabry-Perot interferometer for displacement measurement in ultra large measuring range, Rev. Sci. Instrum., Vol.84, No.5, doi: 10.1063/1.48036. (SCI)(具折疊共振腔之新型干涉位移量測儀研製)
20. Chi-Hsiang Chen, Yung-Cheng Wang, Bean-Yin Lee, 2013, The Effect of Surface Roughness of End-Mills on Optimal Cutting Performance for High-Speed Machining, Journal of Mechanical Engineering, Vol.59, No.2, pp.124-134. (SCI)
21. 王永成, 張元震, 徐力弘, 鄭英毅, 張中平, 2012, 奈米級振動檢測系統, Journal of Machinery Manufacturing and Automation, Vol.1, No.1, pp.37-46. (其他)(具共光程及抗傾角影響特性之雷射干涉位移量測系統研製)
22. Yung-Cheng Wang, Chi-Hsiang Chen, Bean-Yin Lee, Tun-Hao Liang, Te-Shing Chung, 2012, A measurement system for the fabrication inspection of linear and rotary axes in a 5‐axis tool grinder, Technical Gazette, Vol.19, No.3, pp.583-587. (SCI)(結合偏擺補償暨砂輪量測模組之線上精密檢測系統)
23. Yung-Cheng Wang, Chi-Hsiang Chen and Bean-Yin Lee, 2012, THE DESIGN MODEL OF MICRO END-MILLS BY THE FINITE ELEMENT METHOD, Transactions of FAMENA, Vol.36, No.2, pp.41-50. (SCI)
24. Shyu, Lih-Horng; Wang, Yung-Cheng; Chang, Chung-Ping; Tung, Pi-Cheng; Manske, Eberhard, 2012, Investigation on Displacement Measurements in the Large Measuring Range by Utilizing Multibeam Interference, Sensor Letters, Vol.10, No.5-6, pp.1109-1112. (SCI)(具共光程及抗傾角影響特性之雷射干涉位移量測系統研製)
25. Yung-Cheng Wang, Ming-che Kao and Chung-Ping Chang, 2011, Investigation on the spindle thermal displacement and its compensation of precision cutter grinders, Measurement, Vol. 44, Issue 6, pp.1183 -1187. (SCI)
26. Yung-Cheng Wang, Chen-Hsiang Chen and Bean-Yin Lee, 2011, The predictive model of surface integrity in end-mill grinding for high-speed milling, Advanced Materials Research, Vol.264-265, pp.1091-1096. (EI)
27. Lih-Horng Shyu, Chung-Ping Chang, and Yung-Cheng Wang, 2011, Influence of Intensity Loss in the Cavity of a folded Fabry-Perot Interferometer on Interferometric Signals, Review of Scientific Instruments, Vol. 82, Issue 6, pp.063103-1 ~ -3. (SCI)(抗環境干擾及傾角影響之多光束干涉儀研發)
28. Yung-Cheng Wang, Jui-Chang Lin, Shih-Fong Chiu, 2010, Automatic inspection system for dimensional measurements of the saw blade milling cutter, Journal of Industrial Engineering and Management, Vol.3, No.2, pp.370-382. (SCI)
29. Yung-Cheng Wang, Lih-Horng Shyu and Chung-Ping Chang, 2010, Fabry–Pérot interferometer utilized for displacement measurement in a large measuring range, REVIEW OF SCIENTIFIC INSTRUMENTS 81, 1 2010, Vol. 81, Issue.9, pp.093102. (SCI)(高精密及積體化之Fabry-perot干涉位移量測系統研製(III))
30. Yung-Cheng Wang, Lih-Horng Shyu and Chung-Ping Chang, 2010, The Comparison of Environmental Effects on Michelson and Fabry-Perot Interferometers Utilized for the Displacement Measurement, sensors, Vol. 10. (SCI)(高精密及積體化之Fabry-perot干涉位移量測系統研製(I))
31. Lih-Horng Shyu, Yung-Cheng Wang, Jui-Cheng Lin, 2010, A Compact Signal Processing with Position Sensitive Detectors Utilized for Michelson Interferometer, Key Engineering Materials, Vol. 437, pp.98-102. (EI)
32. Yung-Cheng Wang, Lih-Horng Shyu, Wen-Yuh Jywe, Ping-Yin Lee, 2010, Compensation of Tilt Angles and Verification of Displacement Measurements with a Fabry-Perot Interferometer, Key Engineering Materials, Vol. 437. (EI)
33. Chia-Lung Chang, Yung-Cheng Wang, Yi-Chieh Wang and Bean-Yin Lee, 2010, Simulation of Thermal Deformation for Spindle of Machine Tool, Advanced Materials Research, Vol.97-101, pp.2979-2982. (EI)
34. Y.C. Wang, C.H. Chen and B.Y. Lee, 2009, The Predictive Model of Surface Roughness and Searching System in Database for Cutting Tool Grinding, Materials Science Forum, Vol.626-627, pp.11-16. (EI)(五軸工具磨床整機性能驗證程序建構 97-2622-E-224-013-CC3)
35. Yung-Cheng Wang, Chien-Cheng Chang, Jui-Chang Lin, Bee-Yin Lee, Wei-Shin Lin, 2009, Investigation on three dimensional image measurement for geometrical parameters of the cutter, Proceedings of the 2009 Global Congress on Intelligent Systems, Vol. III, pp.24-27. (EI)(五軸工具磨床整機性能驗證程序建構 97-2622-E-224-013-CC3)
36. Y. C. Wang, B. Y. Lee, J. C. Lin, W. Y. Jywe, D. K. Shih, 2007, Development of automatic regrinding program for PC-based tool grinding machine, Journal of Mechanical Science and Technology, Vol. 21, No.10, pp.1612. (SCI)
37. Yung Cheng Wang, Chiu Jie Lin, Chao Jung Chen, Huay Chung Liou, 2007, Stage Equipped with Single Actuator for Nano-Positioning in Large Travel Range, Key Engineering Materials, Vol. 364 - 366, pp. 768. (EI)(結合角度控制之單致動暨長行程精密定位系統發展)
38. Y. C. Wang, E. Manske, G. Jäger and W. Y. Jywe, 2006, Abbe Error-free Test Equipment for Nanometer-order Measurements,Materials Science Forum, Progress on Advances Manufacture for Micro/Nano Technology 2005, Vol. 505-507, pp. 379-384. (SCI)
39. Yung-Cheng Wang, Wen-Yuh Jywe and Chien-Hung Liu, 2005, Development of an automatic test equipment for nano gauging displacement transducers, Journal of Physics.: Conf. Ser. 13, Vol. 13, pp. 216-219. (EI)
40. 王永成, 2004, 高精密測距儀之自動化檢校系統發展, 自動化科技學會會刊(6月號), Vol. 4, No. 2, pp. 31-39.
41. Wang, Y.C., Manske, E., Jaeger, G., 2001, Untersuchungen zur gleichzeitigen Laengen- und Winkelmessungen mit einem Planspiegelinterferometer (Simultaneous Length and Angle Measurement with a Plane Mirror Interferometer), Technisches Messen, Vol. 68, No. H 7-8, pp. 319-325. (EI)
42. Tieng, S.M.; Lin, C.C. ; Wang, Y.C.; Fujiwara, T., 1996, Effect of composition distribution on holographic temperature measurement of a diffuse flame, Meas. Sci. Technol, Vol. 7, No. 4, pp. 477-488. (SCI)
43. Tieng, S.M.; Wang, Y.C., 1993, Holographic visualization of convective flow around a heated rotating cone of finite length, ASME Journal of Fluids Engineering, Vol. 115, No. 3, pp. 515-522. (SCI)

1. Syuan-Cheng Chang, Yung-Cheng Wang, Chung-Ping Chang, 2022, Design and Analysis of Differential Fabry-Perot Interferometer, World Interferometry Day, 2022/04/06, TU Ilmenau, online meeting, llmenau, Germany.
2. Tsung-Yen Kao, Hsiang-Chieh Chang, Yung-Cheng Wang, Po-Cheng Chiu, Chia-Cheng Li, Syuan-Cheng Chang, 2022, The Power-Saving Elevator, The 6th International Conference on Control Engineering and Artificial Intelligence (CCEAI 2022), 2022/03/11-13, Asia Pacific Institute of Science and Engineering (APISE), Online, Japan, pp. 67-70.
3. 賴濬杰, 張中平, 王永成, 張軒誠, 魏仲酉, 2021, 光學式糖度檢測技術, 第24屆全國機構與機器設計學術研討會, 2021/10/29, CSMMT, 國立陽明交通大學, 新竹市.
4. Fu-Tun Chang, Guo-Hua Feng, Yung-Chang Wang, Meng-Hsun Tsai, Syuan-Cheng Chang, Been-Yin Lee, 2021, To Confirm the Abrasion of the Micro Tungsten Carbide Drill during Machining with 2 Different Kinds of MEMS Inertial Sensors, 4th Eurasian Conference on Educational Innovation 2021 (ECEI 2021), 2021/02/05-07, The International Society of Educational Research (iSER), Taitung, Taiwan, Paper No.:M210158.
5. Yung-Cheng Wang, Yi-Chieh Shih, Lih-Horng Shyu, Yu-Fen Fu, 2020, Simultaneous dual-axis error measurement and corresponding compensations, euspen’s 20th International Conference & Exhibition, 2020/06/08-12, Euspen, Geneva, CH, June 2020.
6. Hung-Ta Shih, Yung-Cheng Wang, Pi-Cheng Tung1, Lih-Horng Shyu, Chung-Ping Chang, Eberhard Manske, 2019, Thermal expansion coefficient analysis by Fabry-Pérot interferometer, Euspen's 19th International Conference & Exhibition, 2019/06/03-08, euspen, Bilbao.
7. Hung-Ta Shih, Yung-Cheng Wang, Pi-Cheng Tung, Lih-Horng Shyu, Chung-Ping Chang and Jhen-Ling Huang, 2018, Measurement module for the cross-sectional profile, The 15th International Confernce on Automation Technology (Automation 2018),, 2018/12/06-08, 勤益科大, Taichung, Taiwan. (具多自由度量測模組之Fabry-Perot干涉儀建構)
8. 傅毓芬, 徐力弘, 王永成, 利哲賢, 石宏達, 2018, Fabry-Perot干涉儀應用於熱效應量測及現象探討, 機械工程學會第三十五屆全國學術研討會, 2018/11/30-2018/12/01, 國立中正大學, 嘉義縣民雄鄉. (具多自由度量測模組之Fabry-Perot干涉儀建構)
9. Yung-Cheng Wang, Chung-Ping Chang, Hung-Ta Shih, Bean-Yin Lee, Jui-Cheng Lin, Wei-Chih Wang, 2018, NON-CONTACT THICKNESS MEASUREMENT SYSTEM FOR THE THIN-FILM, 10th International Scientific Conference Management of Technology Step to Sustainable Production, 2018/06/06-08, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Primo?ten, Croatia.
10. Hung-Ta Shih, Pi-Cheng Tung, Yung-Cheng Wang, Lih-Horng Shyu, Chung-Ping Chang, Eberhard Manske, Bean-Yin Lee, Jui-Cheng Lin, 2018, Measurement module based on a common-path Fabry-Perot interferometer for determining three-degree-of-freedom motion parameters, euspen's 18th International Conference & Exhibition, 2018/06/04-08, euspen, Venice, IT.
11. H.T. Shih, P.C. Tung, Y.C. Wang, L.H. Shyu and C.P. Chang, 2018, A five-degree-of-freedom measurement system based on a common-path Fabry-Perot laser interferometer, 2018 國際智慧感測器研討會暨第21屆奈米工程暨微系統技術研討會, 2018/06/01-02, 國立交通大學, Taopei.
12. Yung-Cheng Wang, Lih-Horng Shyu, Chung-Ping Chang, Hung-Ta Shih, Eberhard Manske, 2017, Optimization of the linear positioning calibration for machine tools, MOTSP 2017, 2017/04/04-07, Uni. Zagreb, Dubrovnik, pp.xx.
13. 王永成, 陳欣懋, 黃貞綾, 莊柏毅, 2016, 線上自動化之薄膜測厚系統, 機械工程學會第33屆全國學術研討會, 2016/12/03-04, 機械工程學會、國立臺灣大學、工業技術研究院, 新竹. (膠料檢測技術開發與製程改善, 102-287)
14. 王永成, 徐力弘, 張中平, 王韋智, 莊柏毅, 2016, 疊合寬度與厚度之線上量測模組, 機械工程學會第33屆全國學術研討會, 2016/12/03-04, 機械工程學會、國立臺灣大學、工業技術研究院, 新竹. (膠料檢測技術開發與製程改善, 102-287)
15. 王永成, 李介銘, 黃貞綾, 莊柏毅, 高明源, 2016, 密齒刀具刃口平面度量測系統, 第40屆全國力學會議（Conference on Theoretical and Applied Mechanics, CTAM 2016）, 2016/11/25-26, 中華民國力學學會, 新竹. (密齒刀具口平面度量測技術開發, 104-262)
16. 王永成, 徐力弘, 石宏達, 張中平, 2016, 壓電致動器自動校正系統研製, 第二十四屆全國自動化科技研討會(Automation 2016), 2016/11/04-05, 中華民國自動化科技學會, 台中. (機臺線性軸或高精密設備校驗之多重干涉式位移量測儀器開發, 104-1108)
17. Bean-Yin Lee, Yung-Cheng Wang, Hung-Yu Lu and Yi-Ling Lin, 2016, The inspection technology for the rake angle of cutting tools, Management of Technology – Step to Sustainable Production (MOTSP 2016), 2016/06/01-03, Uni. Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Porec.
18. Yung-Cheng Wang, Lih-Horng Shyu, Chung-Ping Chang, Jui-Chang Lin, Hung-Ta Shih, Syuan-Cheng Chang and Eberhard Manske, 2016, Automatic optical axis alignment method for machine tool calibration, Management of Technology – Step to Sustainable Production (MOTSP 2016), 2016/06/01-03, Uni. Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Porec. (機臺線性軸或高精密設備校驗之多重干涉式位移量測儀器開發, 104-2221-E-224-016-)
19. Yung-Cheng Wang, Bean-Yin Lee, Chih-Hao Huang and Chi-Hsiang Chen, 2016, Development of the axial precision inspection system for spindles in tool grinders, Management of Technology – Step to Sustainable Production (MOTSP 2016), 2016/06/01-03, Uni. Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Porec.
20. Yung-Cheng Wang, Lih-Horng Shyu and Chung-Ping Chang, 2016, An algorithm for the valley and peak detection of the rubber layer in tire manufacturing, Management of Technology – Step to Sustainable Production (MOTSP 2016), 2016/06/01-03, Uni. Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Porec. (膠料檢測技術開發與製程改善, 102-287)
21. Yung-Cheng Wang, Jui-Chang Lin and Hung-Yu Yang, 2016, Quantitative post-processing module of online automatic image inspection for inner bubble defects in a tire, 2016 International Conference on Measurement and Test Methodologies, Technologies and Applications (MTMTA2016), 2016/04/24-25, mtmta2016, Phuket, Thailand.
22. Yung-Cheng Wang, Lih-Horng Shyu, Chung-Ping Chang, Chang-Wen Chen, Hung-Ta Shih, 2016, Development of piezoelectric actuator calibration system, 2016 International Conference on Measurement and Test Methodologies, Technologies and Applications (MTMTA2016), 2016/04/24-25, mtmta2016, Phuket, Thailand.
23. 王永成, 林瑞璋, 潘英廷, 楊弘宇, 2015, 輪胎外型之自動檢測系統, 機械工程學會第三十二屆全國學術研討會, 2015/12/11-12, 高雄應用科技大學, 高雄市, pp.0362.
24. Yung-Cheng Wang1, Bean-Yin Lee, Chung-Ping Chang , Ching-Hua Chang, Hung-Ta Shih, 2015, Integration of the multi-interferometric displacement interferometer and an automatic compensation module for linear positioning calibration, The 13th International Conference on Automation Technology, 2015/11/13-15, National Taiwan Normal University, Taipei. (應用於高精密機械量測之多重干涉位移計模組建構 (I))
25. Yung-Cheng Wang, Lih-Horng Shyu, Chung-Ping Chang, Ming-Li Li, Zao-Sheng Liu, 2015, In-situ dimensional measurement system for overlapped rubber layers, International Conference on Micro/Nano Optical Engineering, 2015/08/10-14, Optical Society (OSA) at the Changchun Institute of Optics Fine Mechanics and Ph, Tainan.
26. Yung-Cheng Wang, Bean-Yin Lee, Jui-Chang Lin, Chung-Ping Chang, Ching-Hua Chang, Jhen-Ling Huang, 2015, Smart Compensation Module for Linear Positioning, The 3rd International Scientific Conference on Engineering and Applied Sciences (ISCEAS 2015), 2015/07/29-31, Higher Education Forum, 沖繩.
27. Yung-Cheng Wang, Lih-Horng Shyu, Chung-Ping Chang, Eberhard Manske, 2015, FABRY-PEROT INTERFEROMETER UTLIZED FOR TOOL MACHINE CALIBRATION, MOTSP 2015, 2015/06/10-12, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Brela.
28. 林志穎, 傅毓芬, 徐力弘, 黃幸文, 王永成, 2014, 類合成波長之雙波長干涉測量方法, 機械工程學會第三十一屆全國學術研討會, 2014/12/06-07, 機械工程學會, 台中市逢甲大學, pp.--.
29. 王永成, 林瑞璋, 王家彥, 2014, 應用於膠料尺寸之自動影像檢測模組, 機械工程學會第三十一屆全國學術研討會, 2014/12/06-07, 機械工程學會, 台中市逢甲大學.
30. 王永成, 林瑞璋, 溫國富, 楊孟哲, 2014, 薄件尺寸線上量測系統開發, 2014全國精密製造研討會, 2014/11/28, 國立高雄第一科技大學, 高雄市, 國立高雄第一科技大學, pp.xxx.
31. 王永成, 徐力弘, 張中平, 2014, 具折疊共振腔之新型干涉位移量測儀研製, 22th Conference on Automation Technology, 2014/11/14-15, 虎尾科技大學, 雲林/虎尾, A3-037.
32. Yung-Cheng Wang, Lih-Horng Shuyu, Chung-Ping Chang; E. Manske, 2014, Signal interpolation method for quadrature phase-shifted Fabry-Perot Interferometer, 58th ILMENAU SCIENTIFIC COLLOQUIUM, 2014/09/08-12, TU Ilmenau, Ilmenau, Germany, pp.ilm1-2014iwk-088.
33. Yung-Cheng Wang, Lih-Horng Shyu, Eberhard Manske, Chung-Ping Chang, 2014, QUADRATURE PHASE-SHIFTED FABRY-PEROT INTERFEROMETER UTILIZED FOR NANOPOSITIONING, MOTSP 2014, 2014/06/11-13, FSB, University of Zagreb, Bol, Croatia, ID-123.
34. 陳政鴻, 王家彥, 王永成, 2014, 膠料顏色之自動辨識系統, 2014機光電技術與應用研討會, 2014/06/04, 聖約翰科技大學, 臺灣/台北, 聖約翰科技大學, pp.xx.
35. 王永成, 楊弘宇, 王家彥, 2013, 橡膠製品之瑕疵檢測模組建構, 機械工程學會第三十屆全國學術研討會, 2013/12/06-07, 機械工程學會, 宜蘭縣, 國立宜蘭大學, # 1639.
36. 潘俐均, 傅毓芬, 徐力弘, 王永成, 陳雲翔, 2013, 光電式膠合尺寸檢測之研究, 機械工程學會第三十屆全國學術研討會, 2013/12/06-07, 機械工程學會, 宜蘭縣, 國立宜蘭大學, # 1414.
37. Yung-Cheng Wang, Lih Horng Shyu, and Chung-Ping Chang, 2013, Development of a novel interferometric displacement measurement instrument with the folded resonant cavity, Automation 2013, 2013/11/01-03, 崑山科大, 臺南市, 崑山科大, C3-B003. (具折疊共振腔之新型干涉位移量測儀研製, NSC 101-2221-E-224-047-)
38. Chung-Ping CHANG, Pi-Cheng TUNG, Yung-Cheng WANG, Lih-Horng SHYU, 2013, NOVEL OPTICAL DESIGN OF FOLDED FABRY-PEROT DISPLACEMENT MEASUREMENT INTERFEROMETER, 5th International Scientific Conference Management of Technology – Step to Sustainable Production, 2013/05/29-31, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Novi Vinodolski. (具折疊共振腔之新型干涉位移量測儀研製)
39. 王永成, 林瑞璋, 楊弘宇, 王家彥, 2013, 應用於膠片尺寸之線上影像量測系統, 2013 精密機械與製造科技研討會, 2013/05/24-26, 台灣扣件產業技術發展協會, 屏東福華大飯店, pp.B013.
40. 王永成, 賴癸澧, 王聖涵, 王家彥, 2013, 線上光電式之周長檢測系統建構, 2013精密機械與製造科技研討會, 2013/05/24-26, 台灣扣件產業技術發展協會, 屏東福華大飯店, pp. G014. (NSC101-2815-C-244-051-E)
41. 徐力弘, 王永成, 張中平, 林嘉威, 黃文彥, 2012, 高斯光束之多重干涉與同調長度影響分析, 機械工程學會第二十九屆全國學術研討會, 2012/12/07-08, 國立中山大學, 高雄市. (具共光程及抗傾角影響特性之雷射干涉位移量測系統研製, NSC 100-2221-E-224-015-)
42. 王永成, 徐力弘, 張中平, 黃文彥, 潘俐均, 2012, 膠料關鍵尺寸線上檢測系統建構, 機械工程學會第二十九屆全國學術研討會, 2012/12/07-08, 國立中山大學, 高雄市.
43. 王永成, 李炳寅, 陳麒翔, 鍾德興, 盧鈜俞, 2012, 五軸工具磨床主軸軸心與其依附線性軸的平行度檢測, 2012全國精密製造研討會, 2012/11/09, 勤益科技大學, 臺中市. (結合偏擺補償暨砂輪量測模組之線上精密檢測系統, NSC 100-2622-E-224-016-CC3))
44. 陳麒翔, 王永成, 李炳寅, 薛力偉, 2012, 影響高速切削SKD61模具鋼的銑削性能分析, 2012全國精密製造研討會, 2012/11/09, 勤益科技大學, 臺中市.
45. 王永成, 楊弘宇, 2012, 應用於橡膠片瑕疵檢測之影像分析模組, 2012全國精密製造研討會, 2012/11/09, 勤益科技大學, 臺中市.
46. 張元震, 王永成, 徐力弘, 鄭英毅, 張中平, 楊弘宇, 2012, 奈米級振動之頻率掃描量測, 2012全國精密製造研討會, 2012/11/09, 勤益科技大學, 臺中市.
47. Yung-Cheng WANG, Chi-Hsiang CHEN, Bean-Yin LEE, Tun-Hao LIANG, Te-Shing CHUNG, 2012, A MEASUREMENT SYSTEM FOR THE FABRICATION INSPECTION OF LINEAR AND ROTARY AXES IN A 5‐AXIS TOOL GRINDER, International Conference Management of Technology – Step to Sustainable Production (MOTSP 2012), 2012/06/14-16, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Hotel Kolovare, Zadar, pp.268.
48. Yung-Cheng Wang, Jui-Chang Lin, Chung-Ping Chang, Dong-Ze Chen, Hong-Yu Yang, 2012, EFFICIENT IMAGE INSPECTION SYSTEM FOR THE DIMENSIONAL MEASUREMENTS OF MILLING CUTTERS AND GRINDING WHEELS, International Conference Management of Technology – Step to Sustainable Production (MOTSP 2012), 2012/06/14-16, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Hotel Kolovare, Zadar, pp.269. (結合偏擺補償暨砂輪量測模組之線上精密檢測系統, NSC 100-2622-E-224 -016 -CC3)
49. 張元震, 王永成, 徐力弘, 鄭英毅, 張中平, 2012, 奈米級振動檢測系統, 2012 精密機械與製造科技研討會, 2012/05/18-20, 臺灣扣件產業技術發展協會, 墾丁福華飯店, C033. (具共光程及抗傾角影響特性之雷射干涉位移量測系統研製, NSC 100-2221-E-224-015-)
50. 王永成, 李炳寅, 張中平, 施登科, 鍾德興, 2012, 工具磨床之主軸熱變位自動補正, 2012 精密機械與製造科技研討會, 2012/05/18-20, 臺灣扣件產業技術發展協會, 墾丁福華飯店, A036.
51. 謝晉傑, 鄭英毅, 王永成, 傅毓芬, 徐力弘, 2011, 結合二維移動電控平台之共軛焦光鉗系統, 機械工程學會第二十八屆全國學術研討會, 2011/12/10-11, 國立中興大學, 台中市, E07-008.
52. 林鴻宇, 張嘉隆, 王永成, 賴柏勛, 2011, 雷射干涉儀在環境溫度之光程誤差分析, 機械工程學會第二十八屆全國學術研討會, 2011/12/10-11, 國立中興大學, 台中市.
53. 王永成, 林維新, 蕭文奇, 2011, 以反應曲面法建構溝槽表面粗糙度預測式, 機械工程學會第二十八屆全國學術研討會, 2011/12/10-11, 中興大學, 台中市, pp.17. (傳統式刀具磨床線上工件影像量測系統)
54. 王永成, 林瑞璋, 陳東澤, 楊弘宇, 2011, 影像量測系統應用於砂輪尺寸量測, 機械工程學會第二十八屆全國學術研討會, 2011/12/10-11, 國立中興大學, 台中市, pp.9. (傳統式刀具磨床線上工件影像量測系統, 99-2622-E-224-002-CC3)
55. 王永成, 馮國華, 趙沿瑞, 2011, 高速加工之滾珠螺桿熱變位補償分析, 機械工程學會第二十八屆全國學術研討會, 2011/12/10-11, 國立中興大學, 台中市, pp.9.
56. Yung‐Cheng Wang, Lih‐Horng Shyu, Chung‐Ping Chang and Shih‐Syun Lin, 2011, Automatic Calibration System for High Precision Angle Measurement, The 11th International Conference on Automation Technology, 2011/11/18-20, Nat. Yunlin Uni., Douliou, Yunlin, C028. (具共光程及抗傾角影響特性之雷射干涉位移量測系統研製, 100-2221-E-224-015-)
57. 張中平, 董必正, 王永成, 徐力弘, 2011, 長行程多重干涉位移量測干涉儀之研製, 第十四屆全國機構與機器設計學術研討會, 2011/11/04, 國？中央大學, 台灣、中壢, N-007. (具共光程及抗傾角影響特性之雷射干涉位移量測系統研製)
58. Wang Y.C., Chen C.H., Lee B.Y., 2011, The Design Model of Micro End-Mills by the Finite Element Method, The International Scientific Conference on "Management of Technologies - Step to Sustainable Production', 2011, 2011/06/07-10, Uni. of Zagreb, Bol, Hotel Elaphusa.
59. Jui-Chang Lin, Yung-Cheng Wang, Wei-Jen Lu, Dong-Ze Chen, 2011, Image Measurement System for the Glass Substrate of Flat Panel Display in a Mobile Phone, The International Scientific Conference on "Management of Technologies - Step to Sustainable Production', 2011, 2011/06/07-10, Uni. of Zagreb, Bol, Hotel Elaphusa.
60. Yung-Cheng Wang, Bean-Yin Lee, Tun-Hao Liang, Chung-Ping Chang, Te-Shing Chung, 2011, Digital Laser Measurement System for the Belt Tension of a Grinding Machine, The International Scientific Conference on "Management of Technologies - Step to Sustainable Production', 2011, 2011/06/07-10, Uni. of Zagreb, Bol, Hotel Elaphusa.
61. 林瑞璋, 王永成, 盧威任, 呂忠憲, 吳啟豪, 陳東澤, 2010, 手機平面顯示器玻璃基板量測系統開發, 第27屆機械工程學會全國學術研討會, 2010/12/10-11, 機械工程學會、臺北科技大學, 臺北, 臺北科技大學, BB11-011. (精密雕銑機之刀具幾何參數檢測設備開發)
62. 王永成, 林瑞璋, 陳東澤, 2010, 影像系統應用於透光元件之折射率量測, 第19屆國防科技學術研討會, 2010/11/19, 國防大學理工學院, 桃園.
63. 林嘉威, 王永成, 徐力弘, 2010, 多光束干涉光強分佈之模擬分析, 中華民國力學學會年會暨第34屆全國力學會議, 2010/11/19-20, 雲林科技大學, 雲林科技大學.
64. 鍾德興, 王永成, 李炳寅, 梁敦皓, 張中平, 2010, 雷射數位式皮帶張力檢測器, 中華民國力學學會年會暨第34屆全國力學會議, 2010/11/19-20, 雲林科技大學, 雲林科技大學.
65. 呂忠憲, 林瑞璋, 王永成, 邱達翔, 林良偉, 柯明宇, 陳東澤, 2010, 具精密複製功能之工具機開發研究, 中華民國力學學會年會暨第34屆全國力學會議, 2010/11/19-20, 雲林科技大學, 雲林科技大學.
66. 楊晉嘉, 張嘉隆, 王永成, 林鴻宇, 2010, 滾珠導螺桿之溫升與熱變位模擬分析, 中華民國力學學會年會暨第34屆全國力學會議, 2010/11/19-20, 雲林科技大學, 雲林科技大學.
67. 王永成, 徐力弘, 張中平, 2010, 共振腔光強損耗對Fabry-Perot干涉儀訊號影響之分析, 2010全國精密製造研討會, 2010/11/06, 臺北醫學大學, 國際製造工程學會中華民國分會, 臺北醫學大學. (NSC 99-2221-E-224-053-)
68. Chung-Ping Chang, Lih-Horng Shyu, Pi-Cheng Tung and Yung-Cheng Wang, 2010, Multibeam interferometer for displacement measurements in the large measuring range, The 2nd International Conference on Nanomanufacturing (nanoMan2010), 2010/09/24-26, Tianjin Uni., Tianjin, China. (高精密及積體化之Fabry-Perot 干涉位移量測系統研製 (III))
69. 馮國華, 王永成, 陳政雄, 潘奕呂, 2010, 內嵌式滾珠螺桿感測系統及其應用於螺桿預壓之研究, 2010第十八屆全國自動化科技研討會, 2010/06/25-26, 自動化科技協會, 中壢 中原大學, C01-0006. (學界科專計畫-智能化攻牙中心機技術研發)
70. 王永成, 李炳寅, 梁敦皓, 鄭家豪, 黃致豪, 2010, 刀具磨床旋轉軸之蝸桿蝸輪配合調整對分度精度之影響探討, 2010第十八屆全國自動化科技研討會, 2010/06/25-26, 自動化科技協會, 中壢 中原大學, A02-0008.
71. 王永成, 徐力弘, 張中平, 2010, 多光束長行程位移量測干涉儀, 2010第十八屆全國自動化科技研討會, 2010/06/25-26, 自動化科技協會, 中壢 中原大學, A02-0006. (高精密及積體化之Fabry-Perot 干涉位移量測系統研製 (III))
72. Yung-Cheng Wang, Jui-Chang Lin and Shih-Fong Chiu, 2010, The automatic image inspection system for measuring dimensional parameters of a saw blade, 8th IEEE International Conference on Control & Automation (ICCA 10), 2010/06/09-11, IEEE Control Systems Chapter, Singapore, Xiamen, pp.1557 - 1561. (精密雕銑機之刀具幾何參數檢測設備開發)
73. Wei-Shin Lin, Yung-Cheng Wang, Wen-Chi Hsiao, Bean-Yin Lee, 2010, Grinding Performance Analysis of Diamond Wheel for Groove Grinding, 8th IEEE International Conference on Control & Automation (ICCA 10), 2010/06/09-11, IEEE Control Systems Chapter, Singapore, Xiamen, pp.608 - 613.
74. Yung-Cheng Wang, Jui-Chang Lin, Shih-Fong Chiu, 2010, AUTOMATIC INSPECTION SYSTEM FOR DIMENSIONAL MEASUREMENTS OF THE SAW BLADE MILLING CUTTER, International Conference "Management of Technology - Step to Sustainable Production" (MOTSP 2010), 2010/06/02-04, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Rovinj, Hotel Eden, No. 119. (精密雕銑機之刀具幾何參數檢測設備開發)
75. Yung-Cheng Wang, Lih-Horng Shyu and Chung-Ping Chang, 2010, Finesse Effect on the Measurement Accuracy of Fabry-Perot Interferometrical Displacement Measurement, International Conference "Management of Technology - Step to Sustainable Production" (MOTSP 2010), 2010/06/02-04, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Rovinj, Hotel Eden, No. 156. (高精密及積體化之Fabry-Perot干涉位移量測系統研製 (III))
76. 王永成, 李炳寅, 陳麒翔, 陳伯瑄, 洪志銘, 鍾德興, 2010, 高速銑削SKD61 模具鋼用端銑刀具性能最佳化分析, 2010 精密機械與製造科技研討會, 2010/05/21-23, 高苑科技大學扣件產業技術研發中心, 屏東福華大飯店, A66.
77. 王永成, 徐力弘, 張中平, 2010, 同調長度對多光束位移干涉儀之影響, 2010 精密機械與製造科技研討會, 2010/05/21-23, 高苑科技大學扣件產業技術研發中心, 屏東福華大飯店, A46. (高精密及積體化之Fabry-Perot 干涉位移量測系統研製 (III))
78. 林瑞璋, 王永成, 邱世豐, 2010, 鋸條成形銑刀參數之動態量測系統建置, 2010年資訊科技國際研討會, 2010/04/23-24, 朝陽技術學院, 台中,朝陽技術學院, No. 173. (精密雕銑機之刀具幾何參數檢測設備開發)
79. 王永成, 林瑞璋, 何祥裕, 2009, 精密模具用加工刀具其參數之自動化檢測, 機械工程學會第二十六屆全國學術研討會論文集, 2009/11/20-21, 機械工程學會, 台南市, 國立成功大學. (五軸工具磨床整機性能驗證程序建構(97-2622-E-224-013-CC3))
80. 王永成 李炳寅 鄭家豪, 2009, 刀具磨床旋轉軸組立之即時量測系統, 2009力學研討會, 2009/11/13-14, 國立聯合大學理工學院, 國立聯合大學理工學院. (五軸工具磨床整機性能驗證程序建構(97-2622-E-224-013-CC3))
81. 王永成, 林瑞璋, 何祥裕, 陳東澤, 2009, 刀具尺寸參數之快速及自動化量檢測, 第十二屆全國機構與機器設計學術研討會, 2009/11/06, 中正大學, 台灣、嘉義. (五軸工具磨床整機性能驗證程序建構(97-2622-E-224-013-CC3))
82. 王永成, 徐力弘, 張中平, 2009, Fabry-Perot干涉儀之訊號探討, 第十二屆全國機構與機器設計學術研討會, 2009/11/06, 中正大學, 台灣、嘉義. (高精密及積體化之Fabry-Perot干涉位移量測系統研製 (II)(97-2221-E-224-020-))
83. Yung-Cheng Wang, Chi-Hsiang Chen and Bean-Yin Lee, 2009, THE PREDICTIVE MODEL OF SURFACE INTEGRITY IN END-MILL GRINDING FOR HIGH-SPEED MILLING, Conference on Advances in Materials and Processing Technologies 2009 (AMPT2009), 2009/10/26-29, Faculty of Engineering, International Islamic University Malaysia, Kuala Lumpur, Malaysia, Paper ID :50.
84. Y.C. Wang , C.H. Chen and B.Y. Lee, 2009, The predictive model of surface roughness and searching system in database for cutting tool grinding, 13th International Manufacturing Conference, 2009/09/21-23, Dalian University of Technology, Dalian, Liaoning Province, P. R. China, Vo.1 page 11.
85. Yung-Cheng Wang, Chi-Hsiang Chen, Bean-Yin Lee, 2009, OPTIMIZATION ANALYSIS OF MULTIPLE PERFORMANCE CHARACTERISTICS IN END-MILL FOR HIGH-SPEED MACHINING, 21st International Conference on Production Research, 2–6 August 2009,, 2009/08/02-06, International Foundation for Production Research (IFPR), Shanghai, China, No. 51.
86. Yung-Cheng Wang, Lih-Horng Shyu, Wen-Yuh Jywe, Bean-Yin Lee, 2009, The compensation of tilt angles and verification of displacement measurements with a Fabry-Perot interferometer, The 9-th International Symposium on Measurement Technology and Intelligent Instruments - ISMTII-2009, Saint-Petersburg, Russia, 2009/06/29-2009/07/02, ICMI, St. Petersburg, pp.ismtii149. (高精密及積體化之Fabry-Perot干涉位移量測系統研製 (II)(97-2221-E-224-020-))
87. Lih-Horng Shyu, Yung-Cheng Wang, Jui-Cheng Lin, 2009, A compact signal processing with position sensitive detectors utilized for Michelson interferometer, The 9-th International Symposium on Measurement Technology and Intelligent Instruments - ISMTII-2009, Saint-Petersburg, Russia, 2009/06/29-2009/07/02, International Committee on Measurements and Instrumentation (ICMI), St. Petersburg, pp.ismtii150. (高精密及積體化之Fabry-Perot干涉位移量測系統研製 (II)(97-2221-E-224-020-))
88. Yung-Cheng Wang, Guo-Hua Feng, Jenq-Shyong Chen, Jui-Chang Lin, Hsiang-Yu Ho, 2009, Measurement system for geometric parameters of carving cutters utilized in CNC precision processing, Automation 2009, June 27-29 2009, 2009/06/27-29, NCKU, Tainan, Taiwan, pp.57-59. (五軸工具磨床整機性能驗證程序建構(97-2622-E-224-013-CC3))
89. Guo-Hua Feng, Ynug-cheng Wang, Jeng-Shyang Chen, Yi-Liu Pan, 2009, Development of embedded sensor system for ball screw health monitoring, Automation 2009, June 27-29 2009, 2009/06/27-29, NCKU, Tainan, Taiwan, pp.58-60. (智能化攻牙中心機技術研發計畫)
90. 王永成, 林瑞璋, 何祥裕, 2009, 精加工用雕刻刀具其幾何參數檢測研究, 2009 精密機械與製造科技研討會, 2009/05/22-24, 高苑科技大學, 屏東墾丁福華大飯店, pp. C-52.
91. 徐力弘, 王永成, 張中平, 2009, Fabry-Perot 干涉儀之位移量測信號細分模式分析, 2009 精密機械與製造科技研討會, 2009/05/22-24, 高苑科技大學, 屏東墾丁福華大飯店, pp. B-13. (高精密及積體化之Fabry-Perot干涉位移量測系統研製 (II)(97-2221-E-224-020-))
92. 林瑞璋, 王永成, 邱世豐, 盧威任, 邱達翔, 2009, Otsu法則應用於鋸條尺寸參數之即時檢測研究, 2009 精密機械與製造科技研討會, 2009/05/22-24, 高苑科技大學, 屏東墾丁福華大飯店, pp. B-08.
93. Yung-Cheng Wang, Chien-Cheng Chang, Jui-Chang Lin, Bee-Yin Lee, Wei-Shin Lin, 2009, Investigation on three dimensional image measurement for geometrical parameters of the cutter, GCIS 2009, 2009/05/19-21, IEEE, Xiamen, pp.24-27. (五軸工具磨床整機性能驗證程序建構(97-2622-E-224-013-CC3))
94. 王永成, 李炳寅, 林欣駿, 2008, 運用於刀具磨床之軸向運動參數檢測系統, 力學學會第三十二屆全國力學會議, 2008/11/28-29, 國立中正大學機械系.
95. 林瑞璋, 王永成, 張傑誠, 何祥裕, 2008, 刀具參數之三維影像量測研究, 機械工程學會第二十五屆全國學術研討會, 2008/11/21-22, 大葉大學.
96. 王永成, 徐力弘, 蕭予菱, 張中平, 2008, 探討Fabry-Perot干涉儀的光機調校與干涉訊號, 機械工程學會第二十五屆全國學術研討會, 2008/11/21-22, 大葉大學.
97. 王永成, 林瑞璋, 何祥裕, 張傑誠, 2008, 模具加工用雕刻刀具之幾何參數檢測系統, 第十一屆全國機構與機器設計學術研討會, 2008/11/14, 明新科技大學.
98. Y. C. Wang , L. H. Shyu , W. Y. Jywe , J.C. Lin , B.Y. Lee , Y. F. Teng, 2008, Fabrication and verification of Fabry-Perot interferometer utilized for displacement measurements, International Conference on Precision Measurement, 2008/09/08-12, TU Ilmenau, Ilmenau, TU Ilmenau, pp.--. (高精密及積體化之Fabry-Perot干涉位移量測系統研製 (II), 97-2221-E-224-020-)
99. 王永成, 徐力弘, 鄭恭凱, 蕭予菱, 2007, Fabry-Perot干涉儀傾角補償及位移量測驗證, 第十屆全國機構與機器設計學術研討會, 2007/11/30, 台中市, N05.
100. 莊秉憲, 王永成, 李炳寅, 林欣駿, 2007, 精密刀具磨床之素材旋轉軸檢測及其補償探討, 機械工程學會第二十四屆全國學術研討會, 2007/11/23-24, 中壢.
101. 王永成, 黃俊揚, 鄭家豪, 2007, 應用誤差分析理論探討刀具磨床之精度提昇策略, 2007空軍官校航空太空工程學術研討會, 2007/10/12, 岡山.
102. Y. C. Wang, B. Y. Lee, J. C. Lin, W. Y. Jywe, D. K. Shih, 2007, Development of automatic regrinding program for PC-based tool grinding machine, The 10th International Conference on ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2007/10/07-11, DAEJEON, A7, AMPT237.
103. Yung-Cheng Wang, Chiun-Jie Lin, Chao-Jung Chen and Huay-Chung Liou, 2007, Stage Equipped with Single Actuator for Nano-Positioning in Large Travel Range, Asia Pacific Conference on Optics Manufacture 2007, 2007/01/10-13, Hongkong, TW192.
104. 莊秉憲, 王永成, 李炳寅, 2006, CNC刀具磨床主軸熱變位補償之探討, 機械工程學會第二十三屆全國學術研討會, 2006/11/24-25, 台南、永康, 崑山科技大學, D7-022.
105. 陳樹山, 王永成, 徐力弘, 2006, Fabry-Perot干涉儀傾角效應對位移量測之探討, 機械工程學會第二十三屆全國學術研討會, 2006/11/24-25, 台南、永康, 崑山科技大學, E10-004.
106. 陳樹山, 王永成, 徐力弘, 2006, 應用於精密長度量測之 Fabry-Perot 干涉儀研製, 第十三屆三軍官校基礎學術研討會, 2006/05/26, 高雄(陸軍官校).
107. 高銘哲, 王永成, 李炳寅, 2006, 精密刀具磨床之主軸熱變性能及其補償, 第十三屆三軍官校基礎學術研討會, 2006/05/26, 高雄(陸軍官校).
108. 陳樹山, 王永成, 徐力弘, 2005, Fabry-perot干涉儀應用於精密位移量測之研究, 第八屆全國機構與機器設計學術研討會, 2005/12/02, 台北(台北科技大學).
109. 高銘哲, 王永成, 李炳寅, 2005, 精密工具磨床之主軸熱變位檢測系統, 第八屆全國機構與機器設計學術研討會, 2005/12/02, 台北(台北科技大學).
110. 林群傑, 王永成, 陳朝榮, 劉惠中, 2005, 單致動器之長行程奈米定位平台, 第八屆全國機構與機器設計學術研討會, 2005/12/02, 台北(台北科技大學).
111. Y. C. Wang, E. Manske, G. Jäger and W. Y. Jywe, 2005, Abbe Error-free Test Equipment for Nanometer-order Measurements, Proceedings of ICAM2005,2005 International Conference on Advanced Manufacture, 2005/11/28-2005/12/02, Taipei.
112. 林群傑, 王永成, 陳朝榮, 劉惠中, 2005, 長行程奈米定位與精密角度回饋控制之系統發展, 第二十二屆CSME年會, 2005/11/25-26, 桃園(國立中央大學).
113. 林群傑, 王永成, 陳朝榮, 劉惠中, 2005, 結合精密角度追蹤控制之長行程精密奈米定位系統, AOI Forum & Show 2005, 2005/10/20, 新竹(交通大學).
114. Wang, Y.C., Shyu, L.H., 2005, Fabry-Perot-Interferometer für Präzisionslängenmessungen im großen Messbereich, 50. Internationales Wissenschaftliches Kolloquium, 2005/09/19-23, Ilmenau(Technische Universitaet Ilmenau).
115. J.C. Lin, B. Y. Lee, Y.C. Wang, 2005, Using Vision System and Neural Network to Create the Relationship Between the Clearance and the Precision of Micro-punched Burr, 50. Internationales Wissenschaftliches Kolloquium, 2005/09/19-23, Technische Universitaet Ilmenau.
116. Yung-Cheng Wang, Wen-Yuh Jywe, Chien-Hung Liu, 2005, Development of an automatic test equipment for nano gauging displacement transducers, the Seventh International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2005), 2005/09/06-08, Huddersfield.
117. 王永成, 高銘哲, 2005, 奈米級位移感測器之精密檢測, 第12屆三軍官校基礎學術研討會, 2005/06/03, 高雄縣岡山鎮(空軍軍官學校).
118. 王永成; 吳家鴻; 覺文郁, 2004, 奈米級測距儀之檢測設備, SME2004, Taipei.
119. Jywe Wenyuh; Liu ChienHung; Deng Yunfeng; Wang YC, 2004, Development of a flexure hinge based stack-type 5 DOF nanometer-scale stage, 2004/09/14-16, St.Gallen.
120. Wang, Y.C.; Manske, E.; Buechner, H.J.; Welter, M.; Jaeger, G, 2002, Praezisionspruefgeraet fuer Nanomesstaster (Precise testing device for nano-measuring-probes), 47. Internationales Wissenschaftliches Kolloquium, 2002/09/23-26, Ilmenau(Technische Universitaet Ilmenau).
121. 丁勝懋,張克勤,王永成, 1992, 數位相移全像干涉術測量擴散火燄溫度場分佈 之研究, 航空太空學會第34屆學術研討會專輯, 台南, pp.677-686.
122. Tieng,, S.M.; Wang, Y.C., 1992, Investigation on thermal boundary layer around heated spinning cone by using 3D-holographic interferometr, 6th International Mechanics and Workshop on Computers in Flow Measurement, Lisbon.

1. Tsan-Chu Lin, Yung-Cheng Wang, Dau-Chung Wang, and Chin-Wei Lin, 2016, Nanopores and Nanoporous Materials, Chapter 4, Nano-Drilling Processing with TEM, Nova Science Publishers, USA, pp.100-142.
2. 林宸生, 李昆益, 王永成, 張文陽, 陳進益, 2012, 光電系統與應用, 第五章 雷射干涉儀, 五南, 臺北.

1. Wang, Y.C., 2003, Praezisionspruefgeraet fuer Nanomesstaster, TU Ilmenau, Germany.