112學年度第2學期教師著作目錄管理系統 
您好!!  
>>教師著作目錄查詢
  1. 按【查詢】按鈕：請先選擇學院→系所→教師，輸入起迄年或不輸入起迄年，再點選【查詢】即完成。
  2. 按【進階查詢】按鈕：採用組合查詢的方式。
  3. 按【匯出Word檔】按鈕：匯出教師【個人】著作資料。
搜尋條件：著作類別->全部著作 | 學院->College Of Engineering | 系所->Department of Mechanical Engineering | 教師姓名->Huang, Pei-Hsing
      
         西元年   至    
黃培興老師的論文著述

一、學術期刊論文

  1. J.-K. Kuo, Pei-Hsing Huang*, Ch.-H. Lee, Ch.-Ch. Cheng, 2024, A molecular level-based parametric study on the capture of hydrogen sulfide and carbon oxides from flue gas mixtures using Au nanopores, Molecular Simulation. (SCI)
  2. Pei-Hsing Huang, J.-K. Kuo*, C.-B. Wu, 2024, Design and evaluation of dual passive hydrogen recovery subsystem for 10 kW PEMFC, International Journal of Hydrogen Energy, Vol.54, No.44, pp.483-490. (SCI)
  3. Pei-Hsing Huang, Yi-Hong Yang, Yuan-Li Ren, 2023, Combination of deep learning and machine vision for defect detection of PCB assembly, International Journal of Mechanical and Production Engineering, Vol.11, No.11, pp.42-49.
  4. 1. Pei-Hsing Huang, S. W. Huang, H. Y. Teng, G. Y. Tzou, C. Lu, 2023, FEM simulation and optimization on rotating extrusion of bi-metal rod with constant shear friction, Journal of Physics: Conference Series, Vol.2631, pp.012005. (EI)
  5. S. W. Huang, Pei-Hsing Huang, G. Y. Tzou, 2023, FEM simulation on forward extrusion of bi-metal rod, Journal of Physics: Conference Series(EI), Vol.2345, pp.012017. (EI)
  6. Pei-Hsing Huang, J.-K. Kuo, C.-B. Wu, 2023, Simulation and experimental measurements of 10-kW PEMFC passive hydrogen recover system, International Journal of Hydrogen Energy. (SCI)
  7. J.-K. Kuo, Y.-T. Tsai, Pei-Hsing Huang*, Ch.-H. Lee, Ch.-H. Lin, 2023, Adsorption and purification of biogas inside graphitic nanopores: Molecular dynamics simulation approach, Journal of Molecular Modeling, Vol.29, No.40, pp.1-13. (SCI)
  8. Pei-Hsing Huang, J.-K. Kuo, S.-S. Chung, 2022, Characteristic simulation and numerical investigation of membrane electrode assembly in proton exchange membrane fuel cell, International Journal of Hydrogen Energy, Vol.47, No.88, pp.37577-86. (SCI)
  9. J.-K. Kuo, J.-J Wu, Pei-Hsing Huang, C.-Y. Cheng, 2022, Inspection of sandblasting defect in investment castings by deep convolutional neural network, International Journal of Advanced Manufacturing Technology, Vol.120, pp.2457-68. (SCI)
  10. Pei-Hsing Huanga, J.-K. Kuo, W.-Z. Jiang, C.-B. Wu, 2021, Simulation analysis of hydrogen recirculation rates of fuel cells and the efficiency of combined heat and power, International Journal of Hydrogen Energy, Vol.46, No.31, pp.16823-16835. (SCI)
  11. J.-K. Kuo, Y.-T. Tsai, Pei-Hsing Huang, J.-Y. Luo, 2021, Capture of acidic gas molecules in metallic nanopillar array surfaces, Journal of Molecular Modeling, Vol.27, No.5, pp.139. (SCI)
  12. J.-K. Kuo, Pei-Hsing Huang et al., 2020, Optimal design of investment casting system for a stuffing box with pedestal of centrifugal pump: Computer simulations and experimental verification, Journal of the Chinese Society of Mechanical Engineers, Vol.41, No.5, pp.551-563. (SCI, EI)
  13. Pei-Hsing Huang, J.-K. Kuo, W.-C. Tu, 2020, Investigations into the evaporation efficiency and hydrogen production rate of methanol-water fuels in a steam reformer Tube, Combustion Science and Technology, Vol.192, No.8, pp.1550-1566. (SCI)
  14. Yu-Ting Tsai, et al., 2020, Utilization of a reinforcement learning algorithm for the accurate alignment of a robotic arm in a complete soft fabric shoe tongues automation process, Journal of Manufacturing Systems, Vol.56, pp.501-513. (SCI)
  15. Pei-Hsing Huang, C.-Y. Cheng, W.-J. Huang, C.-S. Chou, 2020, Optimal design of investment casting system for toothed chain joint: computer simulations and experimental verification, International Journal of Advanced Manufacturing Technology, Vol.106, pp.1931-1943. (SCI)
  16. Pei-Hsing Huang, Sh.-Y. Chien, P. Wu, Ch.-Sh. Chou, 2020, Optimal design of high-strength water-soluble sand core for investment casting system: Thermodynamic analysis and experimental verification, Materials and Design, Vol.189, No.108517, pp.1-9. (SCI)
  17. Pei-Hsing Huang, P.-C. Hsu, T.-H.u Huang, C.-S. Chou,, 2020, Laser sintering of Cu nanoparticles: analysis based on modified continuum-atomistic model, Applied Physics A-Materials Science & Processing, Vol.126, No.31, pp.1-15. (SCI, EI)
  18. Pei-Hsing Huang, L. K.-L. Shih, H.-M. Lin, C.-I Chu, C.-S. Chou, 2019, Novel approach to investment casting of heat-resistant steel turbine blades for aircraft engines, International Journal of Advanced Manufacturing Technology, Vol.5-8, pp.2911-23. (SCI, EI)
  19. Pei-Hsing Huang, W.-J. Huang, C.-S. Chou,, 2019, Preventing casting defects of stainless steel flanges using a water-soaking method, Materials Science Forum, Vol.962, pp.189-193. (EI)
  20. Pei-Hsing Huang, H.-M. Lin, W.-J. Wu, 2019, Gating system design of investment casting for SUS316 spray nozzle, IOP Conference Series Materials Science and Engineering, Vol.644, No.1, pp.012020. (EI)(MOST 107-2221-E-224-060)
  21. Pei-Hsing Huang, P.-C. Hsu, C.-Y. Cheng, J.-W. Jhan, C.-S. Chou, 2019, Dynamic injection behaviour of carbon monoxide nano-jets: analysis based on molecular dynamics simulation, Molecular Simulation, Vol.45, No.10, pp.825-832. (SCI, EI)(MOST 107-2221-E-224-060)
  22. J.-K. Kuo, Pei-Hsing Huang, H.-Y. Lai, Wei-Jen Wu, 2019, Design of casting systems for stainless steel exhaust manifold based on defective prediction model and experimental verification, International Journal of Advanced Manufacturing Technology, Vol.100, pp.529-540. (SCI)
  23. Pei-Hsing Huang, W.-J. Huang, 2018, Preventing shrinkage defects in investment casting of SUS310 stainless steel feather keys, IOP Conference Series: Earth and Environmental Science, Vol.186, No.2, pp.012001. (EI)(MOST 106-2622-E-020-004-CC3)
  24. J.-K. Kuo, H.-Y. Lai, Pei-Hsing Huang, J.-W. Jhan, 2018, Dynamic ejection behavior of water molecules passing through a nano-aperture nozzle, Molecular Simulation, Vol.44, No.17, pp.1469-1477. (SCI, EI)(MOST 106-2221-E-020-014)
  25. 黃培興, 朱哲儀, 黃威儒, 陳民祐, 簡劭瑜, 2018, SCH12耐熱鑄鋼渦輪葉片之澆鑄系統設計, 精密機械與製造科技期刊, Vol.8, No.1, pp.16-25. (MOST 106-2622-E-020-004-CC3)
  26. Pei-Hsing Huang, J.-K. Kuo, T.-H. Fang, W.-R. Wu, 2018, Numerical simulation and design of casting system for stainless steel exhaust manifold, MATEC Web of Conferences, Vol.185, pp.00008. (EI)(MOST 106-2221-E-020-014)
  27. J.-K. Kuo, Pei-Hsing Huang, S.-K. Chien, K.-Y. Huang, K.-T. Chen, 2018, Molecular dynamics simulations of crater formation induced by laser ablation on the surface of α-Fe substrate, MATEC Web of Conferences, Vol.167, pp.03011. (EI)(MOST 106-2622-E-020-004-CC3)
  28. Pei-Hsing Huang, J.K. Kuo, 2018, Evaporation analysis of different fuels in evaporator coil of steam reformer for stationary PEM fuel cell systems, Applied Thermal Engineering, Vol.128, pp.564-577. (SCI, EI)
二、研討會論文
  1. Pei-Hsing Huang et al., 2023, Research on intelligent detection system of micro-gear, 2023 International Conference on Mechatronic, Automobile, and Environment Engineering, 2023/08/03-05, International Society of Mechatronic Engineering, Bangkok.
  2. 黃培興, 廖健廷, 陳相霖, 伍俊嘉, 林育年, 2023, 圖形噴塗熱轉印與載台控制技術之研究, 2023第21屆精密機械與製造科技研討會, 2023/05/19-21, 台灣扣件產業技術發展協會, 屏東.
  3. 黃威儒, 黃培興, 2022, 四通薄壁管件熔模鑄造之優化設計與實驗驗證, 台灣鑄造學會111年度論文發表會, 2022/11/23-25, 台灣鑄造學會, 國立聯合大學.
  4. 黃培興, 林育年, 2022, 雷射雕刻圖形轉印技術與品質評估研究, 中華民國力學學會第四十六屆全國力學會議 (CTAM 2022), 2022/11/18-19, 中華民國力學學會, 高雄.
  5. J.-K. Kuo, P.-Ch. Hsu, T.-Y. Huang, Pei-Hsing Huang, 2022, Research on the identification of the fry species and quantity using Deep Learning Algorithms, 2022 International Conference on Mechatronic, Automobile, and Environmental Engineering, 2022/07/15-17, International Society of Mechatronic Engineering, Penghu.
  6. 黃培興, 李佳和, 2022, 電腦視覺輔助行星齒輪微米級自動定位組裝演算法之研究, 第19屆精密機械與製造科技研討會－PMMT 2021, 2022/05/21-23, 台灣扣件產業技術發展協會, 屏東, A015-1.
  7. 黃培興, 郭名豪, 2022, 基於ROS應用於室內無軌式自主無人載具自動消毒系統之研究, 第20屆精密機械與製造科技研討會, 2022/05/20-21, 台灣扣件產業技術發展協會, 屏東.
  8. 李建輝, 林君鴻, 黃培興, 2022, 基於溫度效應對沼氣於石墨狹縫脫硫製程之研究, 台灣機電工程國際學會2022年第七屆全國學術研討會, 2022/04/22-23, International Society of Mechatronic Engineering, 彰化師範大學.
  9. Ch.-H. Lee, Ch.-Ch. Cheng, Pei-Hsing Huang, 2021, Dynamic adsorption and desulfurization characteristics of flue gas molecules in Au nanopores, The 8th National Conference on Micro and Nanoscale Heat Transfer and Energy, 2021/11/18-20, National University of Tainan, Tainan.
  10. Ch.-H. Lee, Ch.-Ch. Cheng, Pei-Hsing Huang, 2021, Molecular dynamics simulation on the separation and adsorption characteristics of acid gas mixtures in Au nanopores, The 8th National Conference on Micro and Nanoscale Heat Transfer and Energy, 2021/11/18-20, National University of Tainan, Tainan.
  11. Pei-Hsing Huang*, Ch.-H. Lin, 2021, Characteristics of biogas adsorption and desulfurization in graphite micropores, 2021 International Conference on Mechatronic, Automobile, and Environment Engineering, 2021/10/22-24, International Society of Mechatronic Engineering, Hualien.
  12. 鄭兆呈, 廖奕凱, 林君鴻, 黃培興, 2020, 運用機械學習於低照度車行環境下之車牌辨識系統, 中國機械工程學會第37屆全國學術研討會, 2020/11/20-21, 國立虎尾科技大學, 雲林.
  13. 鄭兆呈, 黃培興, 2020, 以分子動力學模擬微孔結構內酸性氣體分離行為之研究, 中國機械工程學會第37屆全國學術研討會, 2020/11/20-21, 國立虎尾科技大學, 雲林.
  14. Pei-Hsing Huang, 2020, Improvements of manufacturing imperfection for investment castings using mold flow analyses and experiments, 2020 International Conference on Mechatronic, Automobile, and Environment Engineering, 2020/11/06-08, International Society of Mechatronic Engineering, Kinmen.
  15. 黃亭瑜, 黃培興, 2020, 運用電腦視覺輔助行人偵測與交通號誌轉換之研究, 台灣機電工程國際學會第五屆全國學術研討會, 2020/08/28-29, 國立勤益科技大學, 台中市.
  16. 李建輝, 蔡鈺鼎, 黃培興, 郭名豪, 2020, 鞋面織布雷射預固著製程技術之研究, 第18屆精密機械與製造科技研討會, 2020/05/22-24, 台灣扣件產業技術發展協會, 屏東.
  17. 高梓鳴, 周春禧, 黃培興, 2020, 氣壓煞車系統動力測試機之研發, 第18屆精密機械與製造科技研討會, 2020/05/22-24, 台灣扣件產業技術發展協會, 屏東.
  18. 黃培興, 謝宗翰, 2019, 基於特徵辨識之計算視覺於機械手臂即時定位系統之研究, 第22屆全國機構與機器設計研討會, 2019/11/22, 國立中正大學, 嘉義.
  19. 黃威儒, 黃培興, 2019, 齒型鏈節座熔模澆鑄系統之優化設計與實驗驗證, 108年台灣鑄造學會年會, 2019/11/14-15, 中州科技大學, 台中.
  20. Pei-Hsing Huang, 2019, Temperature changes induced compositional separation of acidic fluids in nanoslits, 2019 International Conference on Mechatronic, Automobile, and Environment Engineering, 2019/07/05-07, International Society of Mechatronic Engineering, Shizuoke.
  21. 黃培興, 周春禧, 黃威儒, 2019, 運用保溫棉控制精密鑄造系統之缺陷形成, 台灣機電工程國際學會第四屆全國學術研討會, 2019/02/15-16, 國立高雄科技大學, 高雄.
  22. 黃培興周春禧, 高梓鳴, 黃婉琪, 簡士博, 2019, 無人水下載具系統研發, 台灣機電工程國際學會第四屆全國學術研討會, 2019/02/15-16, 國立高雄科技大學, 高雄.
  23. Pei-Hsing Huang, W.-J. Huang, C.-S. Chou, 2018, Preventing casting defects of stainless steel flanges using a water-soaking method, 2018 2nd International Conference on Sensors, Materials and Manufacturing (ICSMM 2018), 2018/11/19-21, National Taipei University of Technology, Taipei.
  24. 黃培興, 黃威儒, 周春禧, 2018, 運用局部水冷製程抑制法蘭精密鑄造鑄品缺陷之形成, 107年台灣鑄造學會年會, 2018/11/17-18, 台灣鑄造學會, 南台科技大學.
  25. Pei-Hsing Huang, J.-W. Jhan, 2018, Spray behaviors of CO nanojets, 2018 International Conference on Mechatronic, Automobile, and Environment Engineering, 2018/07/07-09, International Society of Mechatronic Engineering, Chiang Mai.
  26. 黃培興, 黃威儒, 朱哲儀, 2018, SUS310封閉式離心泵葉輪鑄造方案優化設計, 台灣機電工程學會第一屆第三次年會暨全國學術研討會, 2018/02/25, 台南大學, 台南.
 
讀取 pdf 檔請安裝 Adobe Reader (下載點) 本系統請使用瀏覽器IE 6.0以上版本
 
SSO單一入口網 SSO ∣ YunTech雲科大首頁 YunTech Home ∣ mail諮詢信箱 Mail ∣ Home首頁 Home ∣ Reg帳號註冊 Register｜logon登入 Login 
國立雲林科技大學 版權所有 c2005 National Yunlin University of Science & Technology, All Rights Reserved.